-16%
Click to zoom in
Protect the axle while securing a vehicle for transport
Moroso 80760 provides a strong connection point between a vehicle axle and compatible ratchet tie-down straps. The protective center sleeve helps reduce cutting and chafing where the strap contacts bare metal.
Key Features
- Two-inch-wide axle strap loop
- 36-inch overall strap length
- Flat D-ring at each end
- 12-inch Cordura center sleeve
- 10,000-pound break strength
- 3,333-pound working load limit
- Made in the USA
Fitment
| Application | Compatibility requirements |
|---|---|
| Universal vehicle transport | No year-make-model fitment applies. Confirm the axle or approved attachment point can accept a two-inch-wide, 36-inch loop without contacting brake hoses, wiring, sharp edges, hot exhaust parts, or moving components. Use only with tie-down equipment rated for the vehicle and transport method. |
Specifications
| Detail | Value |
|---|---|
| Manufacturer Part Number | 80760 |
| Product Type | Axle strap loop |
| Width | 2 inches |
| Length | 36 inches |
| End Fittings | Flat D-rings |
| Protective Sleeve | 12-inch Cordura sleeve |
| Break Strength | 10,000 pounds |
| Working Load Limit | 3,333 pounds |
| Country of Manufacture | USA |
What's Included
- One two-inch by 36-inch axle strap loop
- Two attached flat D-rings
- One 12-inch protective center sleeve
- Ratchet straps, trailer hardware, and anchor points are not included
About Moroso
Moroso develops racing, performance, and vehicle-support equipment for professional and enthusiast use. Its transport products are specified by dimensions and load ratings so each component can be matched to the complete tie-down system.
Related Parts
- Moroso ratchet tie-down straps with compatible end fittings
- Trailer anchor points rated for the transported vehicle
- Additional axle straps when the transport plan requires four restraint points
FAQ
What is the 80760?It is a two-inch-wide, 36-inch axle strap loop with D-rings and a protective center sleeve.
Is this strap vehicle-specific?No. It is a universal transport component that must be matched to the vehicle, attachment point, and complete tie-down system.
What is the working load limit?Moroso specifies a 3,333-pound working load limit.
What is the break strength?The manufacturer specifies a 10,000-pound break strength.
Why does the strap have a center sleeve?The 12-inch Cordura sleeve helps protect the strap from cuts and chafing where it contacts bare metal.
Are ratchet straps included?No. This listing includes the axle strap loop only; compatible ratchet straps and trailer anchors are separate.
Can it contact brake lines or wiring?No. Route the loop so it cannot pinch or load brake hoses, wiring, sensors, sharp edges, hot surfaces, or moving parts.
How many straps are required?The required restraint layout depends on the vehicle, trailer, anchor locations, and applicable transport rules. Build the complete system with properly rated components.
Installation Instructions
- Inspect the strap, stitching, sleeve, and D-rings before every use; remove damaged or contaminated equipment from service.
- Select an approved axle or attachment point that keeps the loop clear of hoses, wiring, sharp edges, heat, and moving parts.
- Position the protective sleeve at the primary metal contact area and pass the loop around the attachment point without twists.
- Connect both D-rings to a compatible rated tie-down strap and tension the system according to the vehicle and trailer procedure.
- Check restraint tension and component position before travel and again at appropriate intervals during transport.
California Proposition 65 Warning: This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. See www.P65Warnings.ca.gov.
Moroso
Shop Moroso components for engine builds, oil-system projects and drag-chassis work at Black Ops Auto Works. Compare oil pans with their matched pickups, review ignition-wire applications or choose the shock and mounting reference for your chassis. Build the order around the exact engine, vehicle and intended use.Oil Pans and Matched PickupsMoroso listings distinguish LS-swap, small-block, big-block, Coyote and Toyota JZ oil-system references. Match sump location, chassis clearance, depth and complete engine coverage before choosing a pan. Pickup titles often identify a specific Moroso pan number; select that relationship and the required mounting and sealing components together.Ignition Wires and Engine HardwareUltra 40 and Ultra 350 wire references distinguish engine families, HEI or non-HEI cap arrangements and terminal layouts. Match actual ignition equipment and routing before comparing finishes. Carburetor studs, pan studs, plugs and gasket references need their own thread, le...
View Moroso Products