View vehicle applications
Fitment notes and restrictions
Description
Maintain protection across cold starts and high-temperature operation
Motul 114864 is 8100 X-Max 0W-40 synthetic engine oil supplied as four 5-liter jugs. Its Full SAPS formulation is intended for compatible gasoline and diesel engines when the vehicle manufacturer specifies this viscosity and accepts the required approval or performance standard.
Key Features
- SAE 0W-40 synthetic technology engine oil
- ACEA A3/B4 and API SP performance levels
- Compatible with gasoline, diesel, LPG, CNG, and biofuel engines when authorized by the vehicle manufacturer
- Suitable for compatible turbocharged, naturally aspirated, direct-injection, and indirect-injection engines
- Four-jug case provides 20 liters of total oil
- May be mixed with synthetic or mineral oils, subject to the vehicle manufacturer requirements
Application details and restrictions
| Application Basis | Requirements and Restrictions |
|---|---|
| Universal by lubricant specification | Use only where the owner manual specifies SAE 0W-40 and accepts ACEA A3/B4, API SP, or the required manufacturer approval or performance standard listed below. |
No year-make-model fitment applies. Confirm viscosity, oil specification, sump capacity, service interval, and filter requirements in current vehicle service information. This Full SAPS oil should not replace a low-SAPS lubricant required for a particular emissions system.
Specifications
| Detail | Value |
|---|---|
| Manufacturer Part Number | 114864 |
| Product | 8100 X-Max |
| SAE Viscosity Grade | 0W-40 |
| Oil Type | Synthetic technology, Full SAPS |
| ACEA | A3/B4 |
| API | SP |
| Approvals | BMW LL-01, Mercedes-Benz 229.5, Volkswagen 502 00 / 505 00, Ford WSS-M2C937-A |
| Performance Standards | Renault RN0710, Chrysler MS-12991, Fiat 9.55535-M2 / N2 / Z2 |
| Density at 20 C | 0.841 |
| Kinematic Viscosity at 40 C | 81.0 mm2/s |
| Kinematic Viscosity at 100 C | 13.9 mm2/s |
| HTHS Viscosity at 150 C | 3.6 mPa.s |
| Viscosity Index | 178 |
| Pour Point | -48 C |
| Flash Point | 226 C |
| Sulfated Ash | 1.06 percent by mass |
| TBN | 12.3 mg KOH/g |
| Container Size | 5 liters each |
| Case Quantity | Four jugs |
| Total Volume | 20 liters |
What's Included
- Four 5-liter jugs of Motul 8100 X-Max 0W-40 synthetic engine oil
About Motul
Motul develops automotive and powersports lubricants, fluids, and maintenance products. The 8100 range covers specification-driven passenger-vehicle engine oils, so compatibility depends on the exact viscosity and approval requirements in the vehicle manual.
Related Parts
FAQ
What is the 114864?It is the four-jug case configuration of Motul 8100 X-Max 0W-40 described on this page.
Does this oil fit a specific vehicle?No year-make-model claim is made. Use it only when the vehicle manual requires the matching viscosity and accepts the necessary specification or approval.
How much oil is included?The case contains four 5-liter jugs for 20 liters total.
Is this a low-SAPS oil?No. Motul identifies this formula as Full SAPS, so it should not replace a low-SAPS lubricant required by the vehicle manufacturer.
Can it be mixed with another motor oil?Motul states it can be mixed with synthetic or mineral oils, but the resulting fill must still satisfy the vehicle requirements.
What oil-change interval should be used?Follow the interval in the vehicle manufacturer service information and account for the stated operating conditions.
Does the case include an oil filter?No. The listing includes engine oil only.
Is it suitable for turbocharged engines?It is intended for compatible turbocharged and naturally aspirated engines when the required viscosity and specification match.
Installation Instructions
- Confirm the vehicle manual specifies SAE 0W-40 and accepts the required ACEA, API, or manufacturer standard listed for this oil.
- Verify the correct oil capacity, drain-plug procedure, filter, torque specifications, and service interval before beginning.
- Warm, secure, and raise the vehicle only as directed by its service information, then drain the used oil into an approved container.
- Replace the oil filter and sealing components as required, reinstall the drain plug, and torque all fasteners to the vehicle specification.
- Add the specified initial quantity, start the engine, check for leaks, shut it off, and allow the oil to settle.
- Verify the final level using the manufacturer procedure, reset the service reminder when applicable, and recycle used oil responsibly.




