View vehicle applications
Fitment notes and restrictions
Description
Protect compatible emissions-equipped engines with a low-SAPS 5W-40 oil
Motul 114859 is 8100 X-Clean 5W-40 synthetic engine oil supplied here as four 5-liter jugs. The ACEA C3 low-SAPS formulation is designed for compatible gasoline and diesel engines, including applications with diesel particulate filters or three-way catalysts when the vehicle manufacturer calls for this viscosity and specification set.
Key Features
- SAE 5W-40 synthetic engine oil
- ACEA C3 low-SAPS formulation for compatible emissions-control systems
- Suitable for compatible gasoline and diesel engines, including turbocharged and direct-injection designs
- Four-jug case provides 20 liters of total oil
- Manufacturer-listed API SN performance level
- Current technical data lists a 234 C flash point and -39 C pour point
Application details and restrictions
| Application Basis | Requirements and Restrictions |
|---|---|
| Universal by lubricant specification | Use only where the owner manual specifies SAE 5W-40 and accepts ACEA C3 plus the required manufacturer approval or performance standard listed below. |
No year-make-model fitment applies. Confirm viscosity, oil specification, sump capacity, service interval, and filter requirements in the current vehicle service information before use. Motul advises following the vehicle manufacturer drain interval and not mixing this oil with lubricants that do not meet ACEA C3.
Specifications
| Detail | Value |
|---|---|
| Manufacturer Part Number | 114859 |
| Product | 8100 X-Clean |
| SAE Viscosity Grade | 5W-40 |
| Oil Type | Synthetic technology |
| ACEA | C3 |
| API Performance | SN |
| Approvals | GM dexos2, Mercedes-Benz 229.51, Porsche A40, Renault RN0700 and RN0710 |
| Manufacturer Performance Claims | BMW LL-04 for models through the end of 2018, Chrysler MS-12991, Fiat 9.55535-GH2 / S2 / T2, Ford WSS-M2C917-A, VW 505 00 / 505 01 |
| Density at 20 C | 0.845 |
| Kinematic Viscosity at 40 C | 84.7 mm2/s |
| Kinematic Viscosity at 100 C | 14.1 mm2/s |
| HTHS Viscosity at 150 C | 3.6 mPa.s |
| Viscosity Index | 172 |
| Pour Point | -39 C |
| Flash Point | 234 C |
| Sulfated Ash | 0.80 percent by mass |
| TBN | 7.5 mg KOH/g |
| Container Size | 5 liters each |
| Case Quantity | Four jugs |
| Total Volume | 20 liters |
What's Included
- Four 5-liter jugs of Motul 8100 X-Clean 5W-40 synthetic engine oil
About Motul
Motul develops automotive and powersports lubricants, fluids, and maintenance products. The 8100 range covers specification-driven passenger-vehicle engine oils, so the exact viscosity and approval requirements in the vehicle manual determine compatibility.
Related Parts
FAQ
What is the 114859?It is the four-jug case configuration of Motul 8100 X-Clean 5W-40 described on this page.
Does this oil fit a specific vehicle?No year-make-model claim is made. Use it only when the vehicle manual requires the matching viscosity and accepts the necessary specification or approval.
How much oil is included?The case contains four 5-liter jugs for 20 liters total.
Is this suitable for diesel particulate filters?It is a low-SAPS ACEA C3 oil intended for compatible engines with aftertreatment systems, but the vehicle manual must still authorize the oil specification.
Can it be mixed with another motor oil?Motul advises not mixing it with lubricants that do not meet ACEA C3.
What oil-change interval should be used?Follow the interval in the vehicle manufacturer service information and adjust it for the vehicle operating conditions as directed.
Does the case include an oil filter?No. The listing includes engine oil only.
Is this the newer Gen2 formula?No. This listing is for 8100 X-Clean 5W-40 and should not be substituted for a differently named Motul formula without checking the vehicle requirements.
Installation Instructions
- Confirm the vehicle manual specifies SAE 5W-40 and accepts the required ACEA, API, or manufacturer standard listed for this oil.
- Verify the correct oil capacity, drain-plug procedure, filter, torque specifications, and service interval before beginning.
- Warm, secure, and raise the vehicle only as directed by its service information, then drain the used oil into an approved container.
- Replace the oil filter and sealing components as required, reinstall the drain plug, and torque all fasteners to the vehicle specification.
- Add the specified initial quantity, start the engine, check for leaks, shut it off, and allow the oil to settle.
- Verify the final level using the manufacturer procedure, reset the service reminder when applicable, and recycle used oil responsibly.




