Restore Clean Ignition Delivery on Your Integra
This wire set replaces aging factory cables with OE style resistor wires built to hold a tight seal against heat and moisture. Stainless steel terminals and a silicone jacket keep voltage flowing consistently to each spark plug for a smoother idle and dependable starts.
Key Features
- Variable pitch resistor cable delivers uniform resistance and strong conductivity
- EPDM and silicone outer jacket resists heat, oil, and moisture intrusion
- Magnetic core suppresses EMI and RFI interference across the frequency spectrum
- Silicone sealed boots create a watertight connection at the spark plug
- Stainless steel terminals with up to 3 serrated crimps for maximum retention strength
- Locking C shaped spring clip ensures a secure, corrosion resistant terminal connection
Fitment Table
| Year Range | Make | Model |
|---|---|---|
| 1986-1989 | Acura | Integra |
Specifications
| Detail | Value |
|---|---|
| Insulation Material | Silicone |
| Core Type | Magnetic, variable pitch |
| Terminal Type | Stainless steel, serrated crimp |
| Boot Seal | Silicone sealed, watertight |
| Noise Suppression | EMI/RFI resistant magnetic core |
| UPC | 00087295096246 |
What's Included
- Complete set of spark plug wires for all cylinders
- Pre installed boots on each wire end
About NGK
NGK is a global leader in ignition technology, supplying wire sets and spark plugs to major vehicle manufacturers as original equipment for decades. Its engineering standards for materials, resistance, and durability carry directly into the aftermarket parts sold under the NGK name.
FAQ
What is the NGK 9624?The NGK 9624 is a spark plug wire set engineered for the 1986-1989 Acura Integra. It replaces the factory ignition cables with OE style resistor wires designed to maintain proper voltage delivery and reduce electrical interference.
Which Integra trims fit this wire set?This wire set fits 1986-1989 Acura Integra LS and RS models, including the 1987-1988 LS Special Edition.
Why replace factory spark plug wires on an Integra?Aging wires develop cracked insulation and rising resistance, which can cause misfires, rough idle, and reduced power. A fresh wire set restores consistent voltage delivery to each cylinder.
What makes NGK wire sets resistant to interference?The variable pitch magnetic core produces the impedance needed to suppress interference throughout the frequency spectrum, protecting sensitive electronics from EMI and RFI noise.
Are the boots on this wire set waterproof?The spark plug boots are glued to the cable with a silicone sealer, creating a watertight seal that helps prevent moisture related misfires.
How do I know if my wire set needs replacement?Common signs include rough idle, misfires, hesitation during acceleration, and visible cracking or fraying on the wire insulation.
Is professional installation required?Most owners can install this wire set with basic hand tools by replacing one wire at a time to avoid cylinder mix ups.
Install Instructions
- Confirm the vehicle is off and the engine has cooled
- Remove and replace one wire at a time to keep firing order correct
- Disconnect the old wire from the distributor cap and spark plug
- Route the new wire along the same path as the original
- Seat the boot fully onto the spark plug and distributor terminal
- Repeat for each cylinder, then verify all connections before starting the engine
Engine
Engine parts and engine bay upgrades for Dodge, Jeep, RAM, Chrysler, Chevrolet, Ford, Toyota, Nissan, Subaru, and Honda vehicles are stocked at Black Ops Auto Works. Shop oil catch cans, supercharger pulleys, thermostats, radiators, cooling parts, throttle bodies, intake manifolds, headers, ignition coils, spark plugs, sensors, gaskets, fuel pumps, valve covers, engine covers, billet cap covers, and full engine bay dress-up parts for HEMI, Hellcat, Trackhawk, Redeye, Demon, Scat Pack, RAM TRX, LS, LT, Coyote, EcoBoost, K-Series, and 2JZ builds. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 14,298 engine SKUs across performance, cooling, oil control, ignition, and appearance categories. What This Category Covers The Engine collection combines OEM-replacement engine service parts with performance aftermarket upgrades for supercharged, turbocharged, and naturally aspirated builds...
View Engine Products
Ignition
Ignition parts keep every cylinder firing on time and every start crisp, and Black Ops Auto Works stocks the full system in one collection. Spark plugs, coil packs, plug wires, distributors, starters, sensors, and glow plugs from NGK, Granatelli, MSD, Ford Performance, Moroso, Mishimoto, HKS, and COBB all live here. Whether you are chasing a weak spark on a daily driver, refreshing a tune-up on an LS or Coyote build, or wiring in a full coil-on-plug conversion, this collection has the OEM-grade replacements and the performance upgrades to keep the mixture lighting off cleanly under boost, high RPM, or heavy load. What Belongs in the Ignition System The ignition system is more than just the spark plug. Every part in this collection plays a role in taking 12-volt battery power, stepping it up to tens of thousands of volts, and delivering that spark to the right cylinder at the right instant. Weakness anywhere in the chain shows up as misfires, hard starts, poor mileage, or a chec...
View Ignition Products
NGK
NGK ignition parts for import, domestic, and European vehicles are stocked at Black Ops Auto Works. Shop NGK spark plugs, iridium and platinum plugs, spark plug wire sets, ignition coils, and oxygen sensors trusted by OE manufacturers and racers worldwide. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 565 NGK SKUs spanning spark plugs, wires, coils, and sensors. What This Brand Covers NGK is one of the largest spark plug and ignition component manufacturers in the world, supplying OE spark plugs to most major automakers while also producing performance-grade iridium and platinum plugs for the aftermarket. NGK also manufactures spark plug wire sets, ignition coils, and oxygen sensors. Categories Included Standard copper core spark plugs, V-Power plugs, iridium IX plugs, laser iridium plugs, racing plugs, spark plug wire sets, ignition coils, and OE-spec oxygen sensors. NGK Spar...
View NGK Products
Spark Plug Wire Sets
Spark plug wire sets deliver ignition voltage from the coil or distributor to each spark plug, and Black Ops Auto Works stocks direct fit and universal sets for classic muscle cars, JDM imports, minivans, and modern performance platforms. Shop applications for Chevrolet Corvette and Camaro, Ford Taurus and Aerostar, Mercedes-Benz, Acura Integra, Nissan 300ZX and 200SX, Toyota Corolla AE86, and Jeep Wrangler. Sets are available in factory replacement and high performance configurations with multiple boot styles and wire gauges. Black Ops Auto Works carries 1,286 spark plug wire set SKUs. What This Category Covers This collection includes direct fit spark plug wire sets engineered for specific year, make, and model applications, along with universal HEI and non-HEI style sets that can be trimmed to fit a wide range of distributor and coil pack configurations. Direct Fit vs Universal Wire Sets Direct fit sets are molded to the exact length and routing of a specific vehicle, while u...
View Spark Plug Wire Sets Products


