Click to zoom in
Restore, repair, or complete the listed Jeep application with this OMIX manual steering shaft coupler 76. It is identified by manufacturer part number 18018.03 and must be matched to the complete vehicle, mounting position, dimensions, and current manufacturer application notes before ordering.
Fitment
| Years | Make | Model | Application Notes |
|---|---|---|---|
| 1976-1983 | Jeep | CJ-5 | Manual Steering Shaft Coupler 76. Confirm trim, drivetrain, engine, body style, position, and all manufacturer notes separately. |
| 1976-1986 | Jeep | CJ-7 | Manual Steering Shaft Coupler 76. Confirm trim, drivetrain, engine, body style, position, and all manufacturer notes separately. |
| 1981-1985 | Jeep | Scrambler | Manual Steering Shaft Coupler 76. Confirm trim, drivetrain, engine, body style, position, and all manufacturer notes separately. |
Specifications
| Brand | OMIX |
|---|---|
| Manufacturer | OMIX-ADA |
| Manufacturer Part Number | 18018.03 |
| Product Type | Steering Stabilizer |
| Fitment Type | Vehicle Specific |
| Condition | New |
What's Included
One new OMIX steering stabilizer package identified by manufacturer part number 18018.03. Gaskets, seals, fasteners, wiring, brackets, fluids, and companion parts are included only when expressly listed for this exact part number.
About OMIX
OMIX supplies replacement, restoration, and service components for Jeep and Willys vehicles. Every component remains specific to its manufacturer part number, vehicle generation, position, dimensions, and related factory configuration.
Related OMIX Products
- Shop all OMIX Jeep restoration parts
- Omix HD Lower Steering Shaft Manual 76-86 Jeep CJ
- Omix HD Lower Steering Shaft Power 76-86 Jeep CJ
- Omix Lower Manual Steering Shaft Coupler Kit 72-86 CJ
Frequently Asked Questions
How do I confirm OMIX 18018.03 fits my vehicle?
Match the listed year, make, and model, then verify trim, drivetrain, engine, body style, component position, and every current manufacturer application note.
Should suspension parts be replaced in pairs?
Replace paired wear components by axle when the service procedure calls for it, then inspect mounts, bushings, joints, springs, dampers, steering, and brake-line clearance.
Is an alignment required after installation?
Complete an alignment whenever the repair changes steering or suspension geometry, then verify full travel, tire clearance, torque values, and the required fastener recheck.
Installation Instructions
Follow the current OMIX instructions and vehicle service information for part number 18018.03. Verify the vehicle is safely supported or electrically isolated as required, test-fit every interface, use the specified sealant, fluid, torque, aiming, adjustment, or alignment procedure, then inspect operation and clearance before returning the vehicle to service.
OMIX
Shop OMIX replacement and restoration parts by exact manufacturer part number and verified Jeep or Willys application. The catalog covers body, interior, braking, fuel, engine, drivetrain, electrical, lighting, steering, suspension, and service components for selected vehicle generations. Choosing OMIX Parts Match the exact OMIX manufacturer part number Confirm year, make, model, body style, drivetrain, engine, position, and every current application note Check dimensions, threads, splines, connectors, finish, and mounting interfaces Verify gaskets, seals, fluids, wiring, brackets, fasteners, and companion parts required for installation Use the current vehicle service procedure for torque, adjustment, aiming, alignment, and final safety checks Related Jeep Collections Jeep Parts Rugged Ridge Products Drivetrain Parts Suspension Parts Frequently Asked Questions How do I confirm an OMIX part fits my Jeep?Match the exact manufacturer part number and listed year, make, and model, ...
View OMIX Products
Steering Stabilizers
Steering Stabilizers Steering stabilizers for Jeep Wrangler, Ford Super Duty, Ram heavy-duty and Silverado HD trucks help control steering kickback, road vibration and tire feedback on lifted and off-road builds. Black Ops Auto Works carries 194 steering stabilizer SKUs including single dampers, dual kits, brackets, cylinders, boots and relocation hardware with fitment filters for year, make, model, trim, engine and drivetrain. What This Steering Stabilizers Collection Covers This selection covers direct-fit replacement stabilizers, dual steering stabilizer systems, monotube dampers and mounting kits for Wrangler JK and JL, F-250 and F-350 Super Duty, Ram 2500 and 3500, Silverado HD, Tacoma and 4Runner applications. Single and Dual Steering Stabilizer Kits A single stabilizer is a practical replacement for an OE damper. Dual kits add damping capacity for larger tires, heavy front ends and demanding trail use when the bracket system is made for the exact axle and lift combination...
View Steering Stabilizers Products
Suspension
Suspension parts and complete kits for cars, trucks, SUVs, Jeeps, and off-road builds are stocked at Black Ops Auto Works. Shop coilovers, lowering springs, lift kits, leveling kits, shocks and struts, sway bars, control arms, tie rods, ball joints, bushings, chassis bracing, alignment hardware, air suspension, and complete stage kits from Bilstein, KW, Ohlins, Fox, KING, ICON, BC Racing, Silvers, Eibach, H&R, Swift Springs, Whiteline, Energy Suspension, Moog, SPC Performance, Rough Country, ReadyLIFT, BDS, Skyjacker, Air Lift, Firestone, and Black Ops Auto Works. Start with a matched shock and spring package or a full coilover kit, then layer in sway bars, chassis bracing, and camber adjustment hardware. Every part is filterable by year, make, model, trim, and drivetrain to confirm fitment before ordering. What This Category Covers Suspension is the highest-leverage handling upgrade on any vehicle. A properly matched shock, spring, and sway bar package produces measurable i...
View Suspension Products