Click to zoom in
Secure the occupant with this OMP competition harness in the exact belt width, point configuration, adjuster, buckle, and color shown. Confirm anchor geometry, seat openings, occupant fit, certification, and event requirements before use.
Fitment
| Fitment Basis | Universal only by the exact dimensions, certification, and mounting interface |
|---|---|
| Required Verification | Confirm every dimension, bolt pattern, anchor, clearance, safety, and companion-component requirement |
Specifications
| Brand | OMP Racing |
|---|---|
| Manufacturer Part Number | DA0-0208-A01-061 |
| Product Type | Seat Belts & Harnesses |
| Fitment Type | Universal |
| Intended Use | Competition or off-road use where stated by OMP |
| Condition | New |
| Harness Width | 2In |
| Certification | Fia 8853-2016) Pull Up - Steel Adj OMP |
| GTIN | 8027281008435 |
What's Included
One new OMP seat belts & harnesses identified by manufacturer part number DA0-0208-A01-061, in the quantity and configuration stated in the listing. Companion parts, brackets, wiring, adapters, fasteners, tools, and safety equipment are included only when expressly supplied for this exact part number.
About OMP Racing
OMP Racing develops competition seating, restraint, steering, driver-safety, and cockpit components. Selection must use the exact part number, dimensions, certification, interface, application, and current manufacturer guidance.
Related OMP Products
- Shop all OMP products
- OMP Safety Harness First 2In Black (Fia 8853-2016) Pull Up - Steel Adj
- OMP Tecnica 3/2 Safety Harness - Red
- OMP Safety Harness First 3In 4 Points Red Fia 8854/98
Frequently Asked Questions
What determines whether OMP DA0-0208-A01-061 fits my setup?
Match every listed dimension, certification, bolt pattern, mounting interface, clearance, and companion component. Universal does not mean every vehicle or configuration.
Are brackets, sliders, anchors, and hardware included?
Only components expressly supplied for this exact part number are included. Confirm the seat, side mounts, floor brackets, sliders, anchors, backing plates, fasteners, and harness hardware separately.
What safety checks are required before use?
Verify occupant fit, seat and belt geometry, mounting-point strength, fastener grade and torque, clearance, certification dates, and compliance with the applicable sanctioning body or road-use rules.
Installation
Professional competition-safety installation is strongly recommended. Follow current OMP instructions, use structurally approved mounting points and correct hardware, torque every fastener, verify geometry and clearance, and inspect the complete system before use.
Interior Parts & Accessories
Interior parts and accessories for cars, trucks, SUVs, and Jeeps are stocked at Black Ops Auto Works. Shop gauges and gauge pods, dash and interior trim, shift knobs and shifters, steering wheels, seats and race seats, seat belts and harnesses, roll cage components, floor mats, programmers and tuners, and racing safety gear for Hellcat, Trackhawk, TRX, HEMI, LS, LT, Coyote, and EcoBoost platforms. Every interior product is filterable by year, make, model, trim, and application so the correct part ships the first time. Black Ops Auto Works carries 5,234 interior SKUs across dash trim, seating, safety, electronics, and tuning categories. What This Category Covers Interior parts and accessories span daily comfort upgrades and dedicated racing safety equipment. This collection ranges from simple dash badges and floor mats to full roll cage components, race seats, and harness bars for track-prepped builds, along with electronic tuning products like programmers and performance monitor...
View Interior Parts & Accessories Products
Seat Belts & Harnesses
Seat Belts & Harnesses parts and accessories for performance street, track and race builds are stocked at Black Ops Auto Works. Racing seat belts, four-point harnesses, five-point harnesses, six-point harnesses, camlock systems, SFI-rated belts, lap belts, shoulder straps, eye bolts, belt pads, mounting hardware and restraint accessories are stocked at Black Ops Auto Works. Equip Mustang, Camaro, Civic, WRX STI, Miata, drag-race and autocross builds with a restraint system that matches the seat, roll structure and event rules. Every product is filterable by year, make, model, trim, engine and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 136 Seat Belts & Harnesses SKUs across fitment, sizing, material, fuel-system and installation dimensions. What This Seat Belts & Harnesses Collection Covers A harness must be selected and installed as part of the complete driver seating system. Check current club or sanctioning-body rules, manufac...
View Seat Belts & Harnesses Products
Seats & Accessories
Seats and seating accessories for Jeep Wrangler and CJ, Ford Super Duty, Toyota Tacoma, and racing and track builds are stocked at Black Ops Auto Works. Shop racing seats, reclineable seats, seat covers, seat belts and harnesses, seat brackets and frames, seat cushions and pads, and seat releases from PRP, OMP, NRG, Covercraft, and Rugged Ridge. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 642 Seats & Accessories SKUs across racing seat, seat cover, harness, and mounting hardware categories. What This Category Covers The Seats & Accessories category groups together every part related to in cabin seating for daily driven trucks, off road rigs, and dedicated race builds. Coverage spans direct fit factory replacement seats, FIA rated composite racing seats, custom fit seat covers, harness style seat belts, seat mounting brackets and frames, and comfort accessories like c...
View Seats & Accessories Products