-11%
PowerStop L15030 rear-right Mustang caliper with bracket
Click to zoom in
View vehicle applications

Description

Restore rear braking operation with an application-matched caliper and bracket

PowerStop L15030 is a remanufactured rear-right Autospecialty OE replacement brake caliper for the verified Ford Mustang applications below. It is pressure tested and rebuilt with new wear components to restore original-style operation without changing the vehicle's brake system design. Package, front-caliper, and Brembo restrictions must be confirmed before ordering.

Key Features

  • Exact PowerStop L15030 rear-right configuration
  • Remanufactured and 100 percent pressure tested in Chicago
  • One steel piston with a 44 mm or 1.730-inch diameter
  • New boots, seals, slide pins, and bleeder screw
  • High-temperature EPDM rubber components and silicone lubricant
  • Natural cast-iron finish with parking-brake provision
  • Mounting bracket included

Application Details and Restrictions

Years Make Model Verified Application and Notes
2019 Ford Mustang Bullitt Rear right
2015-2019 Ford Mustang EcoBoost / EcoBoost Premium Requires four-piston front calipers
2020-2023 Ford Mustang EcoBoost / EcoBoost Premium Requires Performance Package
2015-2019 Ford Mustang GT / GT Premium Includes 2015 GT 50 Years Limited Edition
2020 Ford Mustang GT / GT Premium Excludes Brembo-equipped applications
2021 Ford Mustang GT / GT Premium Catalog-listed rear-right application
2022 Ford Mustang GT / GT Premium Without Performance Package
2023 Ford Mustang GT / GT Premium Excludes Performance Package

Specifications

Detail Value
Manufacturer Part Number L15030
Product Type Autospecialty OE replacement brake caliper
Position Rear right / passenger side
Condition Remanufactured
Caliper Material Cast iron
Finish Natural
Piston Count One
Piston Material Steel
Piston Diameter 44 mm / 1.730 in
Mounting Bracket Included
Parking Brake Provision Yes
Quantity One caliper
UPC 889906430100
Warranty 90 days or 3,000 miles under current PowerStop terms

What's Included

  • One PowerStop L15030 rear-right remanufactured brake caliper
  • Application-matched mounting bracket
  • Installed boots, seals, slide pins, and bleeder screw
  • Brake pads, rotor, brake hose, brake fluid, left-side caliper, and installation labor are not included

About PowerStop

PowerStop supplies application-specific braking components for street vehicles. Its Autospecialty OE replacement calipers are remanufactured to restore factory-style fit and function, with pressure testing and replacement of key wear components before sale.

Related Parts

  • Rear brake pads selected for the exact Mustang year and package
  • Rear brake rotor selected for the exact Mustang year and package
  • Rear-left caliper matched by its own manufacturer application data
  • Manufacturer-specified brake fluid and service hardware

FAQ

What is the L15030?

It is a remanufactured PowerStop rear-right Mustang brake caliper supplied with its mounting bracket.

Which side does this caliper fit?

It installs at the rear-right or passenger-side wheel position.

Is the caliper new or remanufactured?

The caliper is remanufactured, pressure tested, and assembled with new boots, seals, slide pins, and bleeder screw.

Is the mounting bracket included?

Yes. The application-matched mounting bracket is included.

Are brake pads and a rotor included?

No. Brake pads, rotor, brake hose, fluid, and unrelated service parts are not included.

Does every 2015-2023 Mustang use this caliper?

No. Engine, package, front-caliper, Brembo, and model-year restrictions in the fitment table must be checked before ordering.

Does it support the parking brake?

Yes. The caliper has the required parking-brake provision for the verified applications.

Should a brake professional install it?

Yes. Brake hydraulic work, bleeding, leak checks, parking-brake setup, and road-safety verification should be completed by a qualified technician using the current Ford service procedure.

Installation Instructions

  1. Confirm the package identifies PowerStop L15030 and the Mustang year, trim, package, front-caliper configuration, and rear-right position match the fitment table.
  2. Secure the vehicle on an approved lift or stands, remove the rear-right wheel, and follow the current Ford service procedure for brake and parking-brake disassembly.
  3. Disconnect the hydraulic hose using methods that prevent contamination and unnecessary fluid loss, then remove the original caliper and bracket.
  4. Compare the replacement caliper, piston, bracket, hose connection, bleeder location, and parking-brake provision with the removed unit before installation.
  5. Install the bracket and caliper with serviceable application-correct hardware, following the vehicle manufacturer's torque values and sequence.
  6. Reconnect the brake hose and parking-brake components without twists, binding, or contact through the full suspension and wheel movement range.
  7. Bleed the brake system with the manufacturer-specified fluid until air is removed, then inspect every connection for leakage.
  8. Reinstall the wheel, verify pedal feel and parking-brake operation, and perform a cautious brake-function check before normal road use.

California Proposition 65 Warning: Cancer and reproductive harm. See www.P65Warnings.ca.gov.

PowerStop Rear Right OE Replacement Caliper for 2015-2023 Ford Mustang

PowerStop
PSBL15030
889906430100
Brake Caliper
131 Units In Stock
$ 101.15 $ 89.48
$ 89.48

Military & First Responders

Military & First Responders

A program for military members and first responders, with dedicated verification and support for your next build.

Learn More & Apply

Your cart

×