PowerStop CRK7942 rear coated rotors, ceramic pads, and hardware
Click to zoom in
View vehicle applications

Description

Refresh the correct heavy-duty Wrangler rear brakes with matched coated rotors and ceramic pads

PowerStop CRK7942 combines two 342 mm solid rear rotors, Z17 ceramic pads, and installation hardware for Wrangler JL applications with brake code BR2 or BR6. The GEOMET coating covers the rotor surfaces, including internal areas, for corrosion protection, while rubberized pad shims and a low-dust ceramic formula support quiet daily driving. Rotor diameter and brake code must be verified before ordering.

Key Features

  • Exact PowerStop CRK7942 rear-axle brake kit
  • Two 342 mm solid rear rotors for BR2 or BR6 brake systems
  • GEOMET 360 coating protects the rotor surfaces against corrosion
  • Low-dust Z17 ceramic pad formula validated through third-party vehicle testing
  • Multi-layer rubberized shims help isolate braking noise
  • Stainless-steel installation hardware and ceramic brake lubricant included
  • Matched stock-replacement components for daily-driven vehicles

Application Details and Restrictions

Years Make Model Verified Application and Notes
2018-2026 Jeep Wrangler JL Rubicon / Sahara BR2 or BR6 brakes; 342 mm solid rear rotors required
2018-2026 Jeep Wrangler Unlimited JL Rubicon / Sahara BR2 or BR6 brakes; 342 mm solid rear rotors required

Specifications

Detail Value
Manufacturer Part Number CRK7942
Product Type Rear brake rotor and pad kit
Series Z17 Evolution Plus GEOMET
Position Rear axle
Rotor Quantity Two
Rotor Diameter 342 mm / 13.47 in
Rotor Thickness 14 mm / 0.56 in
Rotor Type Solid
Bolt Pattern 5x127 mm / 5x5 in
Required Brake Code BR2 or BR6
Pad Material Z17 ceramic
UPC 889906391135
Warranty 90 days or 3,000 miles under current PowerStop terms

What's Included

  • Two PowerStop CRK7942 application-matched 342 mm coated rear rotors
  • One rear-axle set of Z17 ceramic brake pads
  • Stainless-steel pad installation hardware
  • High-temperature ceramic brake lubricant
  • Calipers, brake hoses, brake fluid, front brake components, and installation labor are not included

About PowerStop

PowerStop develops matched pad, rotor, and caliper packages for application-specific brake service. Z17 Evolution Plus kits pair low-dust ceramic pads with coated stock-replacement rotors and the service hardware required for the listed axle position.

Related Parts

  • Front brake components selected by the exact Wrangler brake code and rotor dimensions
  • Rear caliper service parts matched to the BR2 or BR6 system
  • Manufacturer-specified brake fluid and service hardware

FAQ

What is the CRK7942?

It is a rear-axle PowerStop Z17 coated rotor and ceramic pad kit for Wrangler JL applications with BR2 or BR6 brakes and 342 mm solid rear rotors.

Does this fit every 2018-2026 Wrangler JL?

No. The vehicle must use brake code BR2 or BR6 and 342 mm solid rear rotors; other brake codes and rotor sizes require a different kit.

How can the brake system be confirmed?

Check the build information, VIN-based parts catalog, and the diameter and type of the installed rear rotor before ordering.

Are the rotors drilled or slotted?

No. These are stock-style solid rear rotors with a corrosion-resistant GEOMET coating.

How many rotors are included?

The kit includes two rear rotors, one for each side of the rear axle.

Are calipers included?

No. The package contains rotors, pads, pad hardware, and lubricant, but not calipers or hydraulic parts.

Is this intended as a big-brake conversion?

No. It is a matched stock-replacement service kit for vehicles already equipped with the specified BR2 or BR6 brake system.

Should both rear sides be serviced together?

Yes. The kit is packaged for rear-axle service so braking components can be replaced as a matched set following the current Jeep service procedure.

Installation Instructions

  1. Confirm the package identifies PowerStop CRK7942, then verify brake code BR2 or BR6 and measure the existing rear rotors to confirm a 342 mm solid configuration.
  2. Secure the vehicle on an approved lift or stands, remove both rear wheels, and follow the current Jeep service procedure for the parking brake and rear brake system.
  3. Remove the rear calipers, pads, hardware, and rotors without allowing the calipers to hang from the brake hoses.
  4. Inspect calipers, slide pins, hoses, parking-brake components, hubs, and fasteners; replace any unserviceable parts with application-correct components.
  5. Clean the hub mounting faces and install the coated rotors without contaminating the friction surfaces.
  6. Install the supplied stainless-steel hardware and Z17 pads, using the included lubricant only at the service points specified by PowerStop and Jeep.
  7. Reinstall the calipers and wheels using the current vehicle torque values and verify hose, parking-brake, and wheel clearance.
  8. Restore pedal pressure, check for leaks and drag, then complete the current PowerStop pad break-in procedure in a safe location.

California Proposition 65 Warning: Cancer and reproductive harm. See www.P65Warnings.ca.gov.

PowerStop Rear Z17 Coated Brake Kit for 2018-2026 Jeep Wrangler JL

PowerStop
PSBCRK7942
889906391135
Rear Brake Rotor and Pad Kit
94 Units In Stock
$ 262.41
$ 262.41

Military & First Responders

Military & First Responders

A program for military members and first responders, with dedicated verification and support for your next build.

Learn More & Apply

Your cart

×