-13%
PowerStop AR83102EVC front-right two-piece coated brake rotor
Click to zoom in
View vehicle applications

Description

Replace the passenger-side two-piece rotor without changing the factory brake design

PowerStop AR83102EVC is the front-right Evolution Coated rotor for the supported 2021-2023 Dodge Challenger and Charger performance brake applications. Its 400 mm, two-piece, vented construction matches the original-equipment dimensions and vane configuration while the full coating protects non-friction surfaces from corrosion.

Key Features

  • PowerStop AR83102EVC is matched to the verified application and configuration
  • Front passenger-side position only
  • Original-equipment-design two-piece rotor construction
  • 400 mm smooth vented friction ring
  • Full Evolution coating for corrosion protection
  • Manufactured to control disc-thickness variation and runout
  • Dynamically mill balanced
  • Designed for the supported six-piston front brake packages

Application details and restrictions

Years Make Models Required Configuration
2021-2023 Dodge Challenger Supported Scat Pack, Widebody, Hellcat, Redeye, Jailbreak, and T/A 392 Widebody configurations listed by exact year; front right; original-equipment-design two-piece rotor and six-piston brake package where specified
2021-2023 Dodge Charger Supported Scat Pack, Widebody, Hellcat, Redeye, and Jailbreak configurations listed by exact year; front right; six-piston front brake package where specified

Specifications

Detail Value
Manufacturer Part Number AR83102EVC
Position Front right / passenger side
Construction Two-piece
Surface Smooth
Ventilation Vented
Outside Diameter 400 mm / 15.75 in
Nominal Thickness 34.10 mm / 1.34 in
Discard Thickness 32.00 mm / 1.26 in
Overall Height 50.60 mm / 1.99 in
Bolt Circle 115 mm / 4.53 in
Lug Holes 5
ABS Tone Ring Not included
Finish Evolution corrosion-resistant coating
UPC 889906899686

What's Included

  • One exact PowerStop AR83102EVC one front-right Evolution Coated two-piece brake rotor
  • Brake pads, front-left rotor, caliper hardware, brake fluid, and tools are not included

About PowerStop

PowerStop engineers direct-replacement braking components around original-equipment dimensions, vane counts, balance, and application-specific brake packages. Left and right two-piece rotors use distinct part numbers, so side and caliper configuration must be confirmed before installation.

Related Parts

  • The matching front-left rotor uses a different manufacturer part number; select pads, hardware, and the opposite-side rotor only after verifying their exact active product records. No unverified internal link is included.

FAQ

What is the AR83102EVC?

It is front right two-piece brake rotor for the listed 2021-2023 Dodge Challenger and Charger front-right six-piston performance brake applications.

What application must be confirmed before ordering?

Confirm exact year, model, named trim, front-right position, six-piston front caliper package, 400 mm diameter, two-piece original-equipment rotor design, and all current application notes before ordering.

What is included?

The exact supplied components are listed in the What's Included section; unrelated installation parts are not included.

Is this a universal product?

No broad universal fit is claimed. Use only the verified vehicle, dimensions, or companion product stated in the application section.

Does the listing include unrelated installation parts?

No. Only the exact component or kit identified in the included-items section is supplied.

Should existing components be inspected?

Inspect the matching left rotor, pads, six-piston caliper, hoses, hub, wheel bearing, splash shield, brake fluid, and all mounting hardware before installation.

Is professional installation recommended?

Professional installation is recommended whenever the work affects safety, pressurized fluid, suspension geometry, electrical wiring, or protective equipment setup.

What should be checked after installation?

Verify secure mounting, correct routing or clearance, proper function, and every manufacturer-specified post-installation check before normal use.

Installation Instructions

  1. Confirm PowerStop AR83102EVC, the application, and every listed restriction before installation.
  2. Safely raise the vehicle, remove the wheel, and follow the current Dodge service procedure for the six-piston front brake assembly.
  3. Support the caliper without stressing the hose, remove the original rotor, and clean and inspect the hub face and related components.
  4. Compare diameter, thickness, height, bolt circle, vane design, and side orientation before installing the replacement rotor.
  5. Install the rotor, pads, caliper, and wheel using the specified hardware, tightening sequence, and current torque values.
  6. Restore a firm brake pedal before moving the vehicle, verify leak-free operation and clearance, then complete the applicable pad and rotor bedding procedure.

California Proposition 65 Warning: This product can expose you to chemicals including antimony oxide and other chemicals known to the State of California to cause cancer or reproductive harm. For more information, visit www.P65Warnings.ca.gov.

PowerStop Front Right Coated Rotor for 2021-2023 Challenger and Charger

PowerStop
PSBAR83102EVC
889906899686
Brake Rotors - OE - Cryo
22 Units In Stock
$ 895.44 $ 775.59
$ 775.59

Military & First Responders

Military & First Responders

A program for military members and first responders, with dedicated verification and support for your next build.

Learn More & Apply

Your cart

×