-51%
Prothane black shifter-stabilizer polyurethane bushing kit
Click to zoom in
View vehicle applications

Description

Replace worn linkage compliance with firmer polyurethane

Prothane 8-1601-BL is a black polyurethane shifter-stabilizer bushing kit for the manufacturer-listed Honda and Acura applications below. It replaces the factory rubber stabilizer bushings to reduce unwanted linkage movement while retaining the original shifter linkage layout.

Key Features

  • Black polyurethane shifter-stabilizer bushing components
  • Direct replacement for the original rubber stabilizer bushings
  • Firmer material helps reduce flex and excess shifter movement
  • Black and red Prothane versions use the same material hardness; color is the difference
  • Made in the USA
  • Manufacturer lifetime warranty

Fitment

Years Make Model Required Configuration
1984-1987 Honda Civic Factory shifter-stabilizer linkage that accepts Prothane 8-1601-BL
1984-1987 Honda CRX Factory shifter-stabilizer linkage
1999-2000 Honda Civic Si Si application only for this year range
1993-1997 Honda Del Sol VTEC model only; non-VTEC uses a different Prothane kit
1990-2001 Acura Integra Factory shifter-stabilizer linkage

The manufacturer lists 8-1601-BL for these specific applications. It is not the 8-1602-BL kit used by other Civic, CRX, and non-VTEC Del Sol configurations, so confirm the year, model, trim restriction, and original linkage before installation.

Specifications

Detail Value
Manufacturer Part Number 8-1601-BL
Product Type Shifter-stabilizer bushing kit
Material Polyurethane
Color Black
Position Shifter stabilizer linkage
UPC 636169068461
Country of Origin USA
Warranty Manufacturer lifetime warranty

What's Included

  • Prothane 8-1601-BL black polyurethane shifter-stabilizer bushing kit
  • Prothane grease supplied for the bushing installation
  • Manufacturer installation instructions

About Prothane

Prothane manufactures polyurethane suspension, driveline, and chassis components as direct replacements for original rubber parts. Its black and red urethane versions share the same hardness, allowing the color to be chosen without changing the intended performance.

Related Parts

  • No related product is linked because visually similar shifter bushings can use different linkage geometry and application ranges.

FAQ

What is the 8-1601-BL?

It is the black version of Prothane's vehicle-specific polyurethane shifter-stabilizer bushing kit for the listed Honda and Acura applications.

Does this fit every 1988-2000 Honda Civic?

No. For the later Civic range, the manufacturer lists this kit only for the 1999-2000 Civic Si. Other Civic configurations may require a different part.

Does it fit every 1993-1997 Del Sol?

No. This application is limited to the VTEC model; the manufacturer lists a different kit for non-VTEC models.

Is the black material softer than the red version?

No. Prothane states that its black and red urethane versions use the same hardness and differ only in color.

What does the kit replace?

It replaces the original rubber bushings in the supported factory shifter-stabilizer linkage.

Will it fit a custom or swapped linkage?

Fitment is not guaranteed for a custom or swapped linkage. Confirm that the linkage retains the supported factory mounting geometry before ordering.

Is installation grease included?

Yes. Prothane states that its bushing kits include grease for installation.

What warranty applies?

Prothane lists a lifetime manufacturer warranty for its parts, subject to its warranty terms.

Installation Instructions

  1. Confirm the vehicle is one of the listed applications and verify the carton is labeled 8-1601-BL before removing any parts.
  2. Secure the vehicle, place the transmission in neutral, and follow the vehicle service procedure for access to the shifter-stabilizer linkage.
  3. Document the factory linkage orientation and remove the original stabilizer fasteners and worn rubber bushings.
  4. Clean the mounting surfaces and inspect the linkage, sleeves, and fasteners; replace damaged factory hardware before continuing.
  5. Apply the supplied Prothane grease to the polyurethane contact surfaces as directed by the manufacturer instructions.
  6. Install the two black bushing components in the original orientation and reinstall the factory linkage hardware.
  7. Tighten all fasteners to the vehicle service specification, then move the shifter through every gear with the engine off.
  8. Verify free linkage travel and road-test carefully, then recheck the hardware after the initial drive.

Prothane Black Shifter Stabilizer Bushings for Honda and Acura

Prothane
PRO8-1601-BL
636169068461
Shifter Bushings
6 Units In Stock
$ 39.15 $ 18.99
$ 18.99

Military & First Responders

Military & First Responders

A program for military members and first responders, with dedicated verification and support for your next build.

Learn More & Apply

Your cart

×