-12%
Click to zoom in
Build a properly matched suspension or steering setup with this QA1 hardware - singles. Manufacturer part number 52093 is offered in the listed 67-69 GM F-Body Subframe Connector Kit configuration, so vehicle application, mounting position, dimensions, spring rate, adjustment range, and all notes must be confirmed before ordering.
Key Features
- DOM Steel Tubing: 1-1/2 inch OD x 0.120 inch wall thickness for durable strength made in Lakeville Minnesota USA.
- Chassis Rigidity Boost: Tubular steel design connects subframes to eliminate twist and flex under stress for precise control.
- Solid Body Mounts: Aluminum mounts replace stock rubber to further minimize movement with zero noise unlike polyurethane options.
- Factory Contour Fit: Follows body lines for clean appearance while preserving full ground clearance.
- Kit includes connectors mounts and all hardware for complete install.
- Bolt-on process takes 2-4 hours with basic tools lift required.
Fitment
| Years | Make | Model | Submodel or Application |
|---|---|---|---|
| 1967-1969 | Chevrolet | Camaro | All listed configurations unless otherwise noted |
| 1967-1969 | Chevrolet | Camaro | RS |
| 1967-1969 | Chevrolet | Camaro | SS |
| 1967-1969 | Chevrolet | Camaro | Z28 |
| 1967-1969 | Pontiac | Firebird | All listed configurations unless otherwise noted |
| 1967 | Pontiac | Firebird | 326 |
| 1968-1969 | Pontiac | Firebird | 350 |
| 1969 | Pontiac | Firebird | 350 HO |
| 1967-1969 | Pontiac | Firebird | 400 |
| 1967-1968 | Pontiac | Firebird | HO |
| 1967-1969 | Pontiac | Firebird | Sprint |
| 1969 | Pontiac | Firebird | Trans Am |
Confirm chassis configuration, suspension position, drivetrain clearance, brake package, wheel and tire clearance, and every current QA1 application note.
Specifications
| Brand | QA1 |
|---|---|
| Manufacturer Part Number | 52093 |
| Product Type | Hardware - Singles |
| Listed Configuration | 67-69 GM F-Body Subframe Connector Kit |
| Compatibility Basis | Vehicle Specific |
| Condition | New |
What's Included
One new QA1 hardware - singles identified by manufacturer part number 52093, with only the components and hardware supplied by QA1 for that exact part number.
About QA1
QA1 develops suspension, steering, driveline, rod-end, bearing, spring, and chassis components for street, performance, racing, restoration, and custom vehicle applications.
Related QA1 Products
- Shop all QA1 products
- QA1 67-69 GM F-Body 4-Link Sway Bar Kit Rear 7/8in
- QA1 67-69 GM F-Body Level 1 Handling Kit S-Adj
- QA1 67-69 GM F-Body Level 2 Full Vehicle Handling Kit w/ Shocks
Frequently Asked Questions
Will QA1 52093 fit my 1967-1969 Chevrolet Camaro?
Match the complete fitment row, then verify mounting position, suspension configuration, drivetrain clearance, brake package, wheel and tire clearance, and every current QA1 note.
What measurements matter when ordering QA1 52093?
Verify the dimensions and interfaces named in this listing, including thread size and direction, extended and compressed length, bore, spring dimensions or rate, mounting style, and available clearance as applicable.
Does QA1 52093 require setup after installation?
Suspension and steering work commonly requires torque verification, clearance and travel checks, ride-height or damping setup when adjustable, and a professional alignment before road use.
Installation
Follow the current QA1 instructions for this exact part number. Support the vehicle safely, compare every component before disassembly, use the specified hardware and torque values, verify thread engagement and mounting orientation, cycle the suspension through its operating range, check brake and wheel clearance, and complete an alignment when the installation changes suspension or steering geometry.
Hardware
Engine hardware, fasteners, and mounting hardware kits for builds, fabrication, and suspension work are stocked at Black Ops Auto Works. Shop ARP engine bolts and stud kits, suspension mounting hardware from Fox and Rock Krawler, bumper mount kits, tie rod clamps, joint retainer tools, and single and kit-packaged hardware for domestic, import, and off-road platforms. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 945 Hardware SKUs across engine hardware, suspension mounting hardware, and single-piece or kit-packaged fasteners. What This Collection Covers Hardware groups together the fasteners, mounting kits, clamps, and small components that hold engines, suspension systems, and accessories together. This includes ARP engine hardware such as intake manifold bolts and cam bolt kits, suspension mounting hardware from Fox and Rock Krawler for shock and steering stabilizer installs...
View Hardware Products
Hardware - Singles
Individual mounting hardware for automotive builds is stocked at Black Ops Auto Works. Shop single bolts, pins, clamps, crush washers, relays, and bar pins from ARP, Dorman, Vibrant, Fox, Fragola, HKS, Moroso, PRP, Westin, and Zone Offroad for a wide range of vehicle applications. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 329 individual hardware SKUs across type and application. What This Category Covers This collection covers small individual hardware components sold as single items rather than complete kits, for builders who need a specific bolt, pin, clamp, or fastener without purchasing a full assortment. Categories Included Single bolts, dowel pins, hose clamps, crush washers, electrical relays, and bar pins covering a wide range of mounting and fastening applications across suspension, exhaust, engine, and accessory installs. Why Buy Hardware as Singles Many hardware...
View Hardware - Singles Products
QA1
Shop QA1 coilovers, shocks, springs, control arms, sway bars, suspension systems, rod ends, bearings, steering components, and chassis hardware by exact part number and verified compatibility. Choosing the Correct QA1 Product Match the complete year, make, model, suspension configuration, and mounting position when vehicle fitment is listed Verify dimensions, thread size and direction, bore, travel, spring rate, load, and mounting style for interface-based components Confirm drivetrain, brake, wheel, tire, exhaust, and chassis clearance before ordering Review the current QA1 application data and installation instructions for the exact part number Related QA1 Products All QA1 Products QA1 High Travel Coilover Spring QA1 C Series Rod End QA1 Proma Star Coilover Shock Frequently Asked Questions How do I confirm a QA1 product fits my vehicle?Match the listed year, make, model, and submodel, then verify suspension configuration, mounting position, dimensions, drivetrain clearance, b...
View QA1 Products