View vehicle applications
Fitment notes and restrictions
Description
Build a properly matched suspension or steering setup with this QA1 sway bars. Manufacturer part number 52833 is offered in the listed 67-76 Mopar A-Body Sway Bar Kit Front 1-1/8in configuration, so vehicle application, mounting position, dimensions, spring rate, adjustment range, and all notes must be confirmed before ordering.
Key Features
- 1-1/8 in diameter front sway bar for increased roll stiffness.
- Bolt-on installation using factory mounting locations.
- Complete kit includes end links and mounting bushings.
- QA1 65-79 Ford F100 Front Sway Bar - 1-3/8in.
- QA1 64-72 GM A-Body Front Sway Bar - 1-1/4in.
- QA1 63-87 Chevrolet C10 Sway Bar Kit 1-3/8in - Front.
Fitment
| Years | Make | Model | Submodel or Application |
|---|---|---|---|
| 1967-1976 | Dodge | Dart | All listed configurations unless otherwise noted |
| 1967-1968 | Dodge | Dart | 270 |
| 1969-1975 | Dodge | Dart | Custom |
| 1971-1972 | Dodge | Dart | Demon |
| 1971-1972 | Dodge | Dart | Demon 340 |
| 1967-1969 | Dodge | Dart | GT |
| 1968-1969 | Dodge | Dart | GTS |
| 1971-1974 | Dodge | Dart | Special |
| 1974-1975 | Dodge | Dart | Special Edition |
| 1973-1976 | Dodge | Dart | Sport |
| 1973 | Dodge | Dart | Sport 340 |
| 1974-1975 | Dodge | Dart | Sport 360 |
| 1969-1976 | Dodge | Dart | Swinger |
| 1969-1970 | Dodge | Dart | Swinger 340 |
| 1975-1976 | Dodge | Dart | Swinger Special |
| 1967-1969 | Plymouth | Barracuda | All listed configurations unless otherwise noted |
| 1970-1975 | Plymouth | Duster | All listed configurations unless otherwise noted |
| 1970-1973 | Plymouth | Duster | 340 |
| 1974-1975 | Plymouth | Duster | 360 |
| 1975 | Plymouth | Duster | Custom |
| 1976 | Plymouth | Duster | Sport |
| 1971-1976 | Plymouth | Scamp | All listed configurations unless otherwise noted |
| 1975 | Plymouth | Scamp | Brougham |
| 1975-1976 | Plymouth | Scamp | Special |
| 1967-1976 | Plymouth | Valiant | All listed configurations unless otherwise noted |
| 1968-1969 | Plymouth | Valiant | 100 |
| 1974-1975 | Plymouth | Valiant | Brougham |
| 1975 | Plymouth | Valiant | Custom |
| 1975 | Plymouth | Valiant | Scamp |
| 1967-1969 | Plymouth | Valiant | Signet |
Confirm chassis configuration, suspension position, drivetrain clearance, brake package, wheel and tire clearance, and every current QA1 application note.
Specifications
| Brand | QA1 |
|---|---|
| Manufacturer Part Number | 52833 |
| Product Type | Sway Bars |
| Listed Configuration | 67-76 Mopar A-Body Sway Bar Kit Front 1-1/8in |
| Compatibility Basis | Vehicle Specific |
| Condition | New |
What's Included
One new QA1 sway bars identified by manufacturer part number 52833, with only the components and hardware supplied by QA1 for that exact part number.
About QA1
QA1 develops suspension, steering, driveline, rod-end, bearing, spring, and chassis components for street, performance, racing, restoration, and custom vehicle applications.
Related QA1 Products
- Shop all QA1 products
- QA1 71-76 GM B-Body Sway Bar Kit Front 1-3/8in
- QA1 62-72 B-Body / 70-74 E-Body Sway Bar Kit Front 1-1/8in
- QA1 64-72 GM A-Body Front & Rear Sway Bar Kit (1-1/4in Front & 1in Rear)
Frequently Asked Questions
Will QA1 52833 fit my 1967-1976 Dodge Dart?
Match the complete fitment row, then verify mounting position, suspension configuration, drivetrain clearance, brake package, wheel and tire clearance, and every current QA1 note.
What measurements matter when ordering QA1 52833?
Verify the dimensions and interfaces named in this listing, including thread size and direction, extended and compressed length, bore, spring dimensions or rate, mounting style, and available clearance as applicable.
Does QA1 52833 require setup after installation?
Suspension and steering work commonly requires torque verification, clearance and travel checks, ride-height or damping setup when adjustable, and a professional alignment before road use.
Installation
Follow the current QA1 instructions for this exact part number. Support the vehicle safely, compare every component before disassembly, use the specified hardware and torque values, verify thread engagement and mounting orientation, cycle the suspension through its operating range, check brake and wheel clearance, and complete an alignment when the installation changes suspension or steering geometry.




