-9%
Click to zoom in
SKU: DK31-GMA2
QA1 Level 1 Drag Suspension Kit 2.0 (w/o Shocks) 1968-1972 GM A-Body
The QA1 DK31-GMA2 Level 1 Drag Kit 2.0 delivers a complete bolt-on suspension upgrade for 1968-1972 GM A-Body vehicles including Chevelle GTO Cutlass Skylark GS 442 El Camino Monte Carlo. Chromoly tubular front control arms adjustable rear arms thrust bearings and hardware enhance weight transfer eliminate wheel hop and enable harder launches while preserving street drivability. Direct replacement design installs without welding or cutting for reliable drag strip performance on classic muscle cars.
Key Features
- Tubular Front Control Arms: Chromoly steel construction with QA1 low-friction ball joints for lighter weight precise geometry and increased strength over stock stamped arms
- Adjustable Rear Control Arms: Upper and lower arms with polyurethane bushings allow instant center tuning to optimize traction and launch consistency
- Thrust Bearings: Minimize bind in front suspension for smoother response faster weight transfer and reduced deflection under hard acceleration
- Bolt-On Installation: Direct factory arm replacement requires no fabrication or modification for straightforward setup on all A-Body models
- Polyurethane Bushings: Provide firm response durability and alignment stability without the squeak of rubber in high-stress drag applications
Product Notes
- Fits all 1968-1972 GM A-Body models including Chevelle El Camino GTO LeMans Cutlass 442 Skylark GS Monte Carlo
- Shocks not included pair with QA1 5195 single or double adjustable coil-overs for complete setup
- USA-made with limited lifetime warranty on control arms
Installation Notes
- Professional installation recommended.
- Estimated time 6-10 hours with basic tools
- Professional alignment required after installation to ensure proper handling and tire wear
This Part Fits
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1968-1972 | Chevrolet | Chevelle | SS Malibu Nomad Concours Greenbrier 300 300 Deluxe Base |
| 1968-1972 | Chevrolet | El Camino | Base Custom SS |
| 1971-1972 | GMC | Sprint | Base Custom |
| 1968-1972 | Oldsmobile | 442 | Base |
| 1968-1972 | Oldsmobile | Cutlass | Base Cruiser S |
| 1968-1972 | Oldsmobile | Vista Cruiser | Base |
| 1968-1972 | Pontiac | GTO | Base The Judge |
| 1968-1972 | Pontiac | LeMans | Base Luxury Safari Sport T37 |
| 1968-1972 | Pontiac | Tempest | Base Custom GT Safari |
| 1968-1972 | Buick | Skylark | Base Custom 350 |
| 1970-1972 | Chevrolet | Monte Carlo | Base |
Why Choose QA1?
- Performance suspension leader since 1993 with proven drag racing components
- Engineered specifically for 1968-1972 GM A-Body drag strip demands
- Made in USA with chromoly construction for long-term durability
Frequently Asked Questions
-
Q: Are shocks included?
A: No shocks included sold separately recommend QA1 5195 series single or double adjustable coil-overs. -
Q: What material are the arms made from?
A: Front arms use chromoly steel tubing rear arms high-strength steel with polyurethane bushings throughout. -
Q: What is the warranty?
A: Limited lifetime warranty on control arms covers defects in materials and workmanship.
Shipping & Handling
- Method: UPS/FedEx Ground
- Availability: In stock - ships same or next business day
- Packaging: Official QA1 retail box 48 x 16 x 12 inches
- Weight: 52 lbs
Alignment Components
Shop alignment components at Black Ops Auto Works for premium camber kits, caster kits, control arms, toe links, shock mounts, camber plates, and suspension alignment parts designed to improve handling, tire wear, steering response, and suspension geometry. Whether you are dialing in a street car, correcting alignment after lowering your vehicle, or building a track-ready or off-road setup, this collection features high-quality components built for fitment, adjustability, and long-term performance. Shop Alignment Components by Category Browse alignment parts and suspension geometry upgrades across popular product categories, including: Alignment kits Camber kits Caster kits Adjustable control arms Upper control arms Rear toe links and toe arms Shock mounts and camber plates Alignment correction components Suspension geometry upgrades Vehicle-specific alignment hardware These parts are designed to help improve wheel alignment settings, reduce uneven tire wear, increase stability,...
View Alignment Components Products
Control Arms
Control arms are the key suspension linkages that connect the wheel hub and knuckle assembly to the vehicle frame, controlling wheel travel through both compression and droop cycles. Worn OEM control arms with loose ball joints or deteriorated bushings cause vague steering, tire wear, and handling inconsistency that only go away with replacement or upgrade.Popular UpgradesTubular steel upper control arms for lifted trucks and SUVs are the most popular upgrade in the control arm category, correcting the geometry compromised by a suspension lift and restoring proper caster angle and ball joint centering. Adjustable upper control arms allow alignment angles like caster and camber to be dialed in precisely after a lift or lowering modification. Replacement lower control arms with polyurethane or solid aluminum bushings improve response and longevity compared to worn OEM rubber mounts.Why do I need new control arms after a lift kit?A suspension lift changes the angle at which the OEM upp...
View Control Arms Products
QA1
Shop All QA1 Coilovers, Shocks, Springs, Handling Kits & Suspension Components Browse premium QA1 suspension parts and performance components at Black Ops Auto Works, including coilover kits, shock absorbers, lowering kits, handling kits, suspension conversion systems, four-link systems, springs, struts, rod ends, linkage rods, tube adapters, and suspension hardware for muscle cars, trucks, street builds, drag cars, and pro-touring applications. QA1 is one of the most recognized names in the suspension category, known for engineering products that improve ride quality, adjustability, handling, weight transfer, and overall vehicle control. Why Choose QA1 Suspension Products QA1 products are built for enthusiasts looking to improve suspension performance on classic, street, strip, and performance truck platforms. Popular reasons customers choose QA1 include: Adjustable suspension tuning for street and track use Improved handling, ride control, and weight transfer Vehicle-specific...
View QA1 Products
Suspension
Aftermarket suspension systems improve handling, ride quality, and ride height adjustment beyond what the factory suspension provides. From lowering springs and coilover kits for sport handling to lift kits and leveling kits for truck and SUV off-road capability, quality suspension components transform how a vehicle rides and handles. Popular Suspension Upgrades Popular suspension upgrades include coilover kits for adjustable ride height and damping, sport lowering springs for improved handling and reduced body roll, performance shock absorbers and strut assemblies, sway bar and end link upgrade kits, subframe brace kits, and complete suspension packages for lifted trucks and off-road SUVs. Alignment kits including camber bolts and camber arms are also frequently ordered after ride height changes. What is the difference between coilovers and lowering springs? Coilovers are complete shock and spring assemblies with adjustable ride height set by threading the spring perch on the shock...
View Suspension Products