View vehicle applications
Fitment notes and restrictions
Description
Build a properly matched suspension or steering setup with this QA1 sway bars. Manufacturer part number 52828 is offered in the listed 70-81 Chevrolet Camaro (F-Body) 7/8in Rear Sway Bar configuration, so vehicle application, mounting position, dimensions, spring rate, adjustment range, and all notes must be confirmed before ordering.
Key Features
- 7/8 in diameter rear sway bar.
- Bolt-on installation using factory or QA1 rear suspension mounting points.
- QA1 65-79 Ford F100 Front Sway Bar - 1-3/8in.
- QA1 64-72 GM A-Body Front Sway Bar - 1-1/4in.
- QA1 63-87 Chevrolet C10 Sway Bar Kit 1-3/8in - Front.
- Part 52828 uses QA1's standard finish and corrosion protection process.
Fitment
| Years | Make | Model | Submodel or Application |
|---|---|---|---|
| 1970-1980 | Chevrolet | Camaro | All listed configurations unless otherwise noted |
| 1979-1981 | Chevrolet | Camaro | Berlinetta |
| 1973-1978 | Chevrolet | Camaro | LT |
| 1976-1978 | Chevrolet | Camaro | LT Rally Sport |
| 1976-1980 | Chevrolet | Camaro | Rally Sport |
| 1970-1973 | Chevrolet | Camaro | RS |
| 1975 | Chevrolet | Camaro | RS |
| 1981 | Chevrolet | Camaro | Sport |
| 1970-1972 | Chevrolet | Camaro | SS |
| 1970-1974 | Chevrolet | Camaro | Z28 |
| 1977-1981 | Chevrolet | Camaro | Z28 |
| 1970-1981 | Pontiac | Firebird | All listed configurations unless otherwise noted |
| 1970-1981 | Pontiac | Firebird | Esprit |
| 1970-1981 | Pontiac | Firebird | Formula |
| 1970-1981 | Pontiac | Firebird | Trans Am |
Confirm chassis configuration, suspension position, drivetrain clearance, brake package, wheel and tire clearance, and every current QA1 application note.
Specifications
| Brand | QA1 |
|---|---|
| Manufacturer Part Number | 52828 |
| Product Type | Sway Bars |
| Listed Configuration | 70-81 Chevrolet Camaro (F-Body) 7/8in Rear Sway Bar |
| Compatibility Basis | Vehicle Specific |
| Condition | New |
What's Included
One new QA1 sway bars identified by manufacturer part number 52828, with only the components and hardware supplied by QA1 for that exact part number.
About QA1
QA1 develops suspension, steering, driveline, rod-end, bearing, spring, and chassis components for street, performance, racing, restoration, and custom vehicle applications.
Related QA1 Products
- Shop all QA1 products
- QA1 75-79 GM X-Body/73-77 A-Body/70-81 Chevrolet Camaro Front Sway Bar - 1-3/8in
- QA1 82-02 Chevrolet Camaro/Pontiac Firebird (F-Body) 1-1/8in Rear Sway Bar
- QA1 67-69 GM F-Body 4-Link Sway Bar Kit Rear 7/8in
Frequently Asked Questions
Will QA1 52828 fit my 1970-1980 Chevrolet Camaro?
Match the complete fitment row, then verify mounting position, suspension configuration, drivetrain clearance, brake package, wheel and tire clearance, and every current QA1 note.
What measurements matter when ordering QA1 52828?
Verify the dimensions and interfaces named in this listing, including thread size and direction, extended and compressed length, bore, spring dimensions or rate, mounting style, and available clearance as applicable.
Does QA1 52828 require setup after installation?
Suspension and steering work commonly requires torque verification, clearance and travel checks, ride-height or damping setup when adjustable, and a professional alignment before road use.
Installation
Follow the current QA1 instructions for this exact part number. Support the vehicle safely, compare every component before disassembly, use the specified hardware and torque values, verify thread engagement and mounting orientation, cycle the suspension through its operating range, check brake and wheel clearance, and complete an alignment when the installation changes suspension or steering geometry.




