-6%
QA1 replacement ball joint stud 0.1 inch longer, image 1
Click to zoom in

QA1 Ball Joint Stud, 0.1 in Longer, Use with 1210-106

QA1
QAP9029-216
806990054302
Ball Joints
2 Units In Stock - Ships Next Business Day
Ball Joints, QA1, Suspension
$ 42.82 $ 39.95
$ 39.95

Extend Your QA1 Ultimate Ball Joint Setup

The QA1 9029-216 ball joint stud is a replacement stud designed for use with the 1210-106 Ultimate Ball Joint. This stud provides a 0.1 inch longer length and features a black oxide coating for strength and wear resistance.

Key Features

  • Replacement ball joint stud for use with QA1 1210-106 Ultimate Ball Joint
  • 0.1 inch longer stud length
  • Black oxide coated ball stud
  • Designed for strength and minimal wear
  • Part of the QA1 Ultimate Ball Joint system

Fitment

Application Restriction
QA1 1210-106 Ultimate Ball Joint Use only with the specified QA1 Ultimate Ball Joint assembly
Universal accessory No vehicle-specific fitment is stated. Verify the existing ball joint assembly before ordering

Specifications

Detail Value
Model 9029-216
Part type Replacement Ball Joint Stud
Compatible component QA1 1210-106 Ultimate Ball Joint
Length 0.1 inch longer
Finish Black oxide
Use Universal accessory

What's Included

  • One QA1 replacement ball joint stud

About QA1

QA1 develops performance suspension components and replacement parts for applications that require durable construction and serviceable designs. Its Ultimate Ball Joint line is designed to support owner rebuildability and offers multiple stud lengths.

FAQ

What is the 9029-216?

It is a replacement QA1 ball joint stud intended for use with the 1210-106 Ultimate Ball Joint.

What component does this stud fit?

It is specified for use with the QA1 1210-106 Ultimate Ball Joint.

Is this a complete ball joint assembly?

No. This listing is for the replacement stud only.

How much longer is the stud?

The stud is 0.1 inch longer than the standard length referenced for this application.

What finish does the stud have?

The ball stud has a black oxide coating.

Is vehicle-specific fitment available?

No vehicle-specific fitment is stated for this universal accessory. Confirm compatibility with the existing QA1 assembly.

Can the stud be used with other ball joint assemblies?

Compatibility with other assemblies is not confirmed. Use it with the specified QA1 1210-106 Ultimate Ball Joint.

Is installation hardware included?

No additional hardware is confirmed in the available product information.

Installation Instructions

  1. Confirm that the existing assembly is a QA1 1210-106 Ultimate Ball Joint and that the replacement stud is appropriate for the setup.
  2. Review the vehicle and component service information before beginning work.
  3. Support the vehicle securely and remove the ball joint assembly components as required for access.
  4. Remove the existing stud from the QA1 Ultimate Ball Joint using suitable suspension service tools.
  5. Inspect the ball joint body, threads, seats, and related components for damage or excessive wear. Replace damaged parts before assembly.
  6. Install the replacement stud in the correct orientation for the 1210-106 assembly.
  7. Reassemble the ball joint and related suspension components according to the applicable QA1 and vehicle service procedures.
  8. Tighten all fasteners to the vehicle or component manufacturer specifications. Do not substitute torque values from another application.
  9. Check steering and suspension movement, verify that all fasteners are secure, and complete a professional alignment if required.

Request For Information

Have questions about QA1 Ball Joint Stud, 0.1 in Longer, Use with 1210-106? Fill out the form below and we'll get back to you by the next business day.
Ball Joints

Ball Joints

Ball joints restore controlled suspension movement and steering geometry on trucks, SUVs, muscle cars, Jeeps, and daily drivers. Shop OE-replacement and heavy-duty upper and lower ball joints for Silverado, F-150, Ram, Wrangler, Tacoma, 4Runner, Camaro, Mustang, Civic, Jeep, GM HD, and Ford Super Duty applications. Black Ops Auto Works carries 99 ball-joint SKUs across pressed-in replacements, bolt-in service kits, heavy-duty off-road upgrades, control-arm replacement joints, boots, and specialty steering components. Filter by year, make, model, trim, engine, and drivetrain before ordering. What Ball Joints Do Ball joints connect the control arm to the steering knuckle while allowing the suspension to move and the wheel to steer. Worn joints can cause steering looseness, uneven tire wear, clunks, and poor alignment stability. Upper and Lower Locations Many vehicles use upper and lower ball joints, but the configuration varies by suspension design. Verify the exact axle position ...

View Ball Joints Products
QA1

QA1

QA1 suspension parts are stocked at Black Ops Auto Works for American muscle cars and classic trucks. Shop coilover kits, shock absorbers, springs, handling kits, four link systems, sway bars, strut kits, rod ends, and suspension hardware for the Mustang, Camaro, Corvette, Challenger, Charger, and GM B-Body, F-Body, and G-Body platforms. Every product is filterable by year, make, model, trim, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 536 QA1 SKUs across coilovers, shocks, springs, and handling kit categories. What This Brand Covers QA1 is a suspension manufacturer known for adjustable coilover systems, shock absorbers, and complete handling kits built for muscle cars, classic trucks, drag cars, and pro touring builds. The lineup covers everything from single component shock replacement to full vehicle handling packages. Brand Focus QA1 concentrates on American muscle car and classic truck platforms, with deep coverage of GM, Ford, and ...

View QA1 Products
Suspension

Suspension

Suspension parts and complete kits for cars, trucks, SUVs, Jeeps, and off-road builds are stocked at Black Ops Auto Works. Shop coilovers, lowering springs, lift kits, leveling kits, shocks and struts, sway bars, control arms, tie rods, ball joints, bushings, chassis bracing, alignment hardware, air suspension, and complete stage kits from Bilstein, KW, Ohlins, Fox, KING, ICON, BC Racing, Silvers, Eibach, H&R, Swift Springs, Whiteline, Energy Suspension, Moog, SPC Performance, Rough Country, ReadyLIFT, BDS, Skyjacker, Air Lift, Firestone, and Black Ops Auto Works. Start with a matched shock and spring package or a full coilover kit, then layer in sway bars, chassis bracing, and camber adjustment hardware. Every part is filterable by year, make, model, trim, and drivetrain to confirm fitment before ordering. What This Category Covers Suspension is the highest-leverage handling upgrade on any vehicle. A properly matched shock, spring, and sway bar package produces measurable i...

View Suspension Products
Military & First Responder Discounts

Military & First Responder Discount Program

Black Ops Auto Works proudly honors active duty military, veterans, National Guard, reserves, police officers, firefighters, and EMTs with an exclusive 5% discount on all performance parts and carbon fiber upgrades. Verify instantly and start saving today.

Learn More & Apply

Your cart

×