Click to zoom in
SKU: BJDR6 | UPC: 806990123626
QA1 Quick Disconnect Ball Joint - 3/8-24 UNF Right Hand - Carbon Steel
QA1 BJDR6 quick disconnect ball joint delivers fast connect and disconnect for performance linkages. Built for motorsports carburetors fuel injection throttle bodies and low force mechanical setups in racing agricultural lawn equipment and industrial uses. Carbon steel construction with protective coating ensures long lasting corrosion resistance while stainless steel spring provides smooth reliable operation.
Key Features
- Quick Connect/Disconnect: Allows rapid assembly disassembly for time saving maintenance in racing pits or field repairs
- 3/8-24 UNF Right Hand Thread: Secure precise fit in standard performance linkage systems with 0.750 inch thread length
- Corrosion Resistant Coating: Carbon steel ball stud body and sleeve protected for harsh environments like trackside or outdoor equipment
- Stainless Steel Spring: Resists fatigue for consistent tension and dependable quick release function over repeated cycles
- Compact Dimensions: 1.625 inch overall length 0.625 inch width 1.250 inch height suits tight spaces in carb linkage throttle setups
Product Notes
- Suitable only for low force mechanical linkages not high load suspension or steering
- Right hand thread pairs with left hand BJDL6 for push-pull applications
- Lightweight at 0.15 pounds reduces overall system mass
Installation Notes
- Professional installation recommended.
- Lubricate ball stud with QA1 rod end grease before assembly
- Compatible with 3/8-24 linkages verify clearance for 0.375 inch ball diameter
This Part Fits
| Year | Make | Model | Submodel |
|---|---|---|---|
| All Years | Universal | Motorsports Vehicles | Carb/Fuel Injection Linkages |
| All Years | Universal | Agricultural Equipment | Low Force Linkages |
| All Years | Universal | Lawn/Garden Equipment | Throttle/Control Linkages |
Why Choose QA1?
- Motorsports heritage with components in drag racing circle track and off-road
- Durable materials tested for vibration and environmental exposure
- Precision machined tolerances for zero slop in critical linkages
Frequently Asked Questions
-
Q: What applications does the BJDR6 fit?
A: Universal for low force linkages in motorsports carburetors fuel injection agricultural and industrial equipment no vehicle specific restriction -
Q: What materials and finish does it have?
A: Carbon steel ball stud body sleeve with protective corrosion resistant coating stainless steel spring 0.375 inch ball diameter -
Q: What warranty coverage applies?
A: QA1 limited lifetime warranty against manufacturing defects when used in approved low force applications
Shipping & Handling
- Method: UPS Ground / USPS Priority
- Availability: In stock - ships same or next business day
- Packaging: Individual protective box 2 x 2 x 1 inches
- Weight: 0.15 pounds
Premium Quality Ball Joints for Enhanced Vehicle Performance
Ball joints restore controlled suspension movement and steering geometry on trucks, SUVs, muscle cars, Jeeps, and daily drivers. Shop OE-replacement and heavy-duty upper and lower ball joints for Silverado, F-150, Ram, Wrangler, Tacoma, 4Runner, Camaro, Mustang, Civic, Jeep, GM HD, and Ford Super Duty applications. Black Ops Auto Works carries 99 ball-joint SKUs across pressed-in replacements, bolt-in service kits, heavy-duty off-road upgrades, control-arm replacement joints, boots, and specialty steering components. Filter by year, make, model, trim, engine, and drivetrain before ordering. What Ball Joints Do Ball joints connect the control arm to the steering knuckle while allowing the suspension to move and the wheel to steer. Worn joints can cause steering looseness, uneven tire wear, clunks, and poor alignment stability. Upper and Lower Locations Many vehicles use upper and lower ball joints, but the configuration varies by suspension design. Verify the exact axle position ...
View Premium Quality Ball Joints for Enhanced Vehicle Performance Products
QA1
QA1 suspension parts are stocked at Black Ops Auto Works for American muscle cars and classic trucks. Shop coilover kits, shock absorbers, springs, handling kits, four link systems, sway bars, strut kits, rod ends, and suspension hardware for the Mustang, Camaro, Corvette, Challenger, Charger, and GM B-Body, F-Body, and G-Body platforms. Every product is filterable by year, make, model, trim, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 536 QA1 SKUs across coilovers, shocks, springs, and handling kit categories. What This Brand Covers QA1 is a suspension manufacturer known for adjustable coilover systems, shock absorbers, and complete handling kits built for muscle cars, classic trucks, drag cars, and pro touring builds. The lineup covers everything from single component shock replacement to full vehicle handling packages. Brand Focus QA1 concentrates on American muscle car and classic truck platforms, with deep coverage of GM, Ford, and ...
View QA1 Products
Suspension
Suspension parts and complete kits for cars, trucks, SUVs, Jeeps, and off-road builds are stocked at Black Ops Auto Works. Shop coilovers, lowering springs, lift kits, leveling kits, shocks and struts, sway bars, control arms, tie rods, ball joints, bushings, chassis bracing, alignment hardware, air suspension, and complete stage kits from Bilstein, KW, Ohlins, Fox, KING, ICON, BC Racing, Silvers, Eibach, H&R, Swift Springs, Whiteline, Energy Suspension, Moog, SPC Performance, Rough Country, ReadyLIFT, BDS, Skyjacker, Air Lift, Firestone, and Black Ops Auto Works. Start with a matched shock and spring package or a full coilover kit, then layer in sway bars, chassis bracing, and camber adjustment hardware. Every part is filterable by year, make, model, trim, and drivetrain to confirm fitment before ordering. What This Category Covers Suspension is the highest-leverage handling upgrade on any vehicle. A properly matched shock, spring, and sway bar package produces measurable i...
View Suspension Products