View vehicle applications
Fitment notes and restrictions
Description
Build or service a suspension, steering, or fabrication assembly with this QA1 jam nuts. Manufacturer part number MK03 uses the listed Stud Top Bushing Kit w/Jam Nuts - 5/8in & 7/8in Hole Bushings configuration, and compatibility is determined by exact dimensions, threads, mounts, travel, load, and mating components rather than vehicle name alone.
Key Features
- QA1 part number MK03 is a stud-top bushing kit including jam nuts, sized for 5/8in and 7/8in hole bushings.
- No, each is sized for a different mount hole diameter; use the one matching the specific mount.
- QA1's stated contents cover the bushings and jam nuts; the stud is part of the shock or coilover being mounted.
- QA1 does not publish a vehicle-specific installation procedure or torque value for this hardware; use the mount manufacturer's specification.
Fitment
| Fitment Basis | Universal or interface-specific |
|---|---|
| Required Verification | Confirm dimensions, thread size and direction, mounting style, travel, spring rate, load, clearance, and mating components |
| YMM Status | No vehicle model is assigned when compatibility is determined by physical interface |
Specifications
| Brand | QA1 |
|---|---|
| Manufacturer Part Number | MK03 |
| Product Type | Jam Nuts |
| Listed Configuration | Stud Top Bushing Kit w/Jam Nuts - 5/8in & 7/8in Hole Bushings |
| Compatibility Basis | Universal |
| Condition | New |
What's Included
One new QA1 jam nuts identified by manufacturer part number MK03, with only the components and hardware supplied by QA1 for that exact part number.
About QA1
QA1 develops suspension, steering, driveline, rod-end, bearing, spring, and chassis components for street, performance, racing, restoration, and custom vehicle applications.
Related QA1 Products
- Shop all QA1 products
- QA1 Heavy Duty Tie Rod Sleeve Kit - 5/8-18 x 3.4in Sleeve - 5/8-18 Thread x 4.15in Long w/Jam Nuts
- QA1 Heavy Duty Tie Rod Sleeve Kit - 5/8-18 x 4.9in Sleeve - 5/8-18 Thread x 5.65in Long w/Jam Nuts
- QA1 Heavy Duty Tie Rod Sleeve Kit - 9/16-18 x 8in Sleeve - 9/16-18 Thread x 8.63in Long w/Jam Nuts
Frequently Asked Questions
How do I confirm QA1 MK03 is compatible with my build?
Compare every listed dimension, thread size and direction, mount, travel range, spring rate or load requirement, clearance, and mating component with the planned assembly.
What measurements matter when ordering QA1 MK03?
Verify the dimensions and interfaces named in this listing, including thread size and direction, extended and compressed length, bore, spring dimensions or rate, mounting style, and available clearance as applicable.
Does QA1 MK03 require setup after installation?
Suspension and steering work commonly requires torque verification, clearance and travel checks, ride-height or damping setup when adjustable, and a professional alignment before road use.
Installation
Follow the current QA1 instructions for this exact part number. Support the vehicle safely, compare every component before disassembly, use the specified hardware and torque values, verify thread engagement and mounting orientation, cycle the suspension through its operating range, check brake and wheel clearance, and complete an alignment when the installation changes suspension or steering geometry.




