RaceQuip 204001 PRO Series Replacement Face Shield Clear SA-2010 SA-2015 Helmets

The RaceQuip 204001 is a direct-fit replacement face shield engineered for RaceQuip PRO SA-2010 and SA-2015 full-face helmets as well as SFI 24.1-2010 and SFI 24.1-2015 Youth helmets. Constructed from 3mm distortion-free, high-strength polycarbonate, this shield delivers crystal-clear optics and a low-fog design that keeps your vision sharp under race conditions. Whether you need a spare clear shield for daytime track use or a replacement after damage, it ships ready to install with a visor strip and tear-off posts already included. This is the clear-tint option in the RaceQuip PRO 20400X series family.

Key Features

• Distortion-free, low-fog optics from 3mm high-strength polycarbonate construction
• Crystal-clear tint, the standard choice for daytime racing and general track use
• Direct fit for RaceQuip PRO SA-2010 and PRO SA-2015 full-face helmets
• Youth helmet compatible with SFI 24.1-2010 and SFI 24.1-2015 Youth series
• Tear-off ready with tear-off posts included, accepting RaceQuip PRO series tear-off films (sold separately)
• Complete kit including visor strip and tear-off posts, no extra hardware required to install
• Backed by RaceQuip's 1-year warranty against manufacturing defects

Compare PRO Series Shields by Tint

All five shields in the RaceQuip PRO 20400X series share identical fitment, construction, and included hardware. Choose the tint that best matches your racing environment and lighting conditions.

What's Included

• 1x Clear polycarbonate face shield (3mm, distortion-free)
• 1x Visor strip
• Tear-off posts

Note: Tear-off films are sold separately (RQP203213, 20-pack). The shield pivot hardware kit (pivot screws, friction guide screws, springs, washers, hold-down post) is sold separately as RQP204111 if replacement hardware is needed.

Compatible Helmets

This shield is designed exclusively for RaceQuip PRO and SFI Youth series full-face helmets. It does not fit Vesta or Vesta20 series helmets (use 205xxx shields), SA2005 or older helmets, open-face helmets, or any other helmet brand. Confirm your helmet series before ordering.

Full Specifications

Warranty and Legal

RaceQuip backs this shield with a 1-year warranty against manufacturing defects. If the shield exhibits a defect in materials or workmanship within one year of purchase, RaceQuip will replace or repair the item at their discretion. Normal wear, scratching from use, and impact damage are not covered under warranty.

Important safety note: A replacement face shield is a safety component. Inspect the shield before every use for cracks, crazing, deep scratches, or distortion. A compromised shield should be replaced immediately. Never use a shield that has sustained impact damage, even if no visible cracking is present.

California residents: This product may contain chemicals known to the State of California to cause cancer and reproductive harm. See www.p65warnings.ca.gov.

About RaceQuip

RaceQuip is one of motorsport's most widely recognized names in driver safety equipment, supplying helmets, suits, gloves, harnesses, and accessories to racers at every level from entry-level autocross to professional oval and road course competition. The PRO series helmets and compatible shields have become a staple in club racing, karting, and SCCA competition due to their combination of certified protection and accessible pricing. RaceQuip products are distributed through major racing retailers and dealer networks across North America, and are accepted by SCCA, NASA, NHRA, and most sanctioning bodies for amateur and semi-professional competition. Every RaceQuip product is backed by a direct warranty program and a dealer support network for replacement parts and accessories.

Frequently Asked Questions

What helmets does the fit?
This shield fits RaceQuip PRO SA-2010 and PRO SA-2015 (PRO15) full-face helmets, as well as RaceQuip SFI 24.1-2010 and SFI 24.1-2015 Youth series full-face helmets. It does not fit Vesta or Vesta20 series helmets, open-face helmets, SA2005 or older helmets, or any helmet from another manufacturer.

Does the 204001 fit the RaceQuip PRO20 or SA-2020 helmets?
Compatibility with the PRO20 (SA-2020) series is not confirmed for this part. This shield is specifically rated for PRO SA-2010 and PRO SA-2015 helmets. If you own a PRO20 helmet, contact RaceQuip directly to confirm whether the 204001 is the correct replacement or whether a newer shield part number applies.

Will this shield accept tear-off films?
Yes. The shield ships with tear-off posts installed, which accept RaceQuip PRO series tear-off films. Tear-off films are sold separately; the compatible part is RQP203213 (2-mil, 20-pack PRO series tear-offs). Tear-off films are not included with this shield.

What hardware is included in the box?
The kit includes the clear face shield, one visor strip, and tear-off posts. It does not include pivot screws, friction guide screws, springs, washers, or the hold-down post. If you need replacement pivot hardware, order RQP204111 separately.

What is the material and thickness of this face shield?
The shield is made from 3mm distortion-free, high-strength polycarbonate. The 3mm thickness is the standard for SFI-rated racing shields. RaceQuip's M-series (motorcycle) shields use a thinner 2mm polycarbonate; the 3mm SA-series thickness provides greater structural integrity for open-cockpit racing environments.

What is the difference between the 204001 Clear and the 204004 Dark Smoke shields?
Both shields share identical fitment, construction, material, and included hardware. The only difference is tint. The 204001 is clear, passing maximum light, making it the best choice for indoor tracks, night racing, overcast days, and general all-condition use. The 204004 Dark Smoke reduces light transmission and is better suited for bright outdoor daytime racing in direct sunlight.

Is this shield compatible with SCCA, NHRA, or NASA competition requirements?
The shield itself does not carry a standalone SFI or Snell certification; certification applies to the complete helmet assembly. As a genuine OEM replacement shield from RaceQuip designed for SA-2010 and SA-2015 certified helmets, it is the manufacturer-approved replacement for sanctioned competition use. Always verify with your specific sanctioning body that your helmet and shield combination meets their current rulebook requirements before competing.

Can I use tear-offs in the rain or on road courses?
Tear-off films are primarily used in dirt oval and off-road racing where debris and roost quickly foul the shield. On road courses or in wet conditions, a clean clear shield without tear-offs typically provides better optics. This shield is tear-off compatible, but their use is at the driver's discretion based on racing environment and conditions.

How do I install this shield on my PRO series helmet?
The shield mounts to the helmet via pivot posts on either side of the helmet shell. Remove the existing shield by unsnapping or unscrewing the pivot hardware, align the new shield onto the posts, and secure. The visor strip clips along the top edge of the shield to provide a seal against the helmet shell. If your pivot hardware is worn or damaged, order RQP204111 as a complete hardware kit before installation.

Does this shield have an anti-fog coating?
The shield features a distortion-free low-fog polycarbonate construction, which refers to the optical quality and geometry of the lens rather than a chemical anti-fog coating. RaceQuip does not specify an applied anti-fog treatment on this shield. For extreme fogging conditions, aftermarket anti-fog inserts or treatments designed for polycarbonate shields can be used.