-5%
Sold out
Click to zoom in
The Radium Engineering Remote Mount Vented Female Dry Break 1.5in Elbow is a refueling or filler component for a specific tank and hose layout. Confirm cap or dry-break standard, neck diameter, venting, mounting, hose routing, and fuel compatibility.
Key Features
- Filler, cap, neck, vent, and hose standards are configuration specific
- Mounting and routing must support safe refueling and spill control
- Confirm fuel-cell and motorsport-rule compatibility
Fitment
This is a universal or configuration-specific fuel-system component. Confirm dimensions, port and thread standards, hose size, fuel compatibility, pressure range, and mating components before ordering.
Specifications
| Brand | Radium Engineering |
|---|---|
| Manufacturer Part Number | 20-1104-V |
| Product Type | Filler Necks |
| Condition | New |
What's Included
- The Radium Engineering component identified by manufacturer part number 20-1104-V
- Only fittings, seals, brackets, wiring, or hardware specifically listed for this exact configuration
Brand Information
Radium Engineering develops fuel delivery, crankcase ventilation, fluid-control, and motorsport plumbing components. Port standards, pressure range, fuel compatibility, mounting, and vehicle fitment remain manufacturer-part-number specific.
Related Parts
Frequently Asked Questions
Will this work with my existing fuel cell or filler hose?
Confirm neck or dry-break standard, hose diameter, cap, venting, mounting flange, and the fuel-cell manufacturer's requirements.
Can this component be used with E85 or other ethanol blends?
Fuel compatibility depends on the exact seals, element, hose, and component materials. Confirm the manufacturer specifications for every part in the system before using ethanol fuel.
Should this fuel-system part be installed professionally?
Professional installation is recommended whenever the work involves tank removal, custom plumbing, wiring, pressure adjustment, fabrication, or motorsport safety requirements.
What should be checked before the first startup?
Verify every connection, seal, fastener, hose route, electrical circuit, and pressure setting. Prime and pressure-test the complete system, then correct any leak before starting the engine.
Installation Instructions
Depressurize the fuel or fluid system, disconnect power when required, work in a ventilated area away from ignition sources, and protect open lines from contamination. Assemble every connection with the correct seal and torque method, secure plumbing and wiring away from heat and abrasion, then prime and pressure-test the complete system before operation.
Filler Necks
Filler Necks parts and accessories for Silverado, F 150, Ram, Tacoma, Wrangler, Ford cab and chassis, GR86, BRZ, race cars and custom fuel cell builds are stocked at Black Ops Auto Works. Shop OE replacement filler necks, fuel filler tubes, remote mount fillers, vented fillers, dry break fittings, filler caps, weld on necks, fill adapters, fuel cell necks, elbows and refueling kits. Every product is filterable by year, make, model, trim, engine and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 34 filler necks SKUs with fitment focused choices for maintenance, work, travel and performance builds. What Filler Necks Cover Filler necks connect the body side fuel entry point to the tank or fuel cell. They must route correctly, seal fuel vapor and work with the cap, vent and emissions components used by the vehicle. Replacement and Custom Solutions Vehicle specific necks restore original routing on street vehicles. Remote mount and dry break compone...
View Filler Necks Products
Radium Engineering Fuel System Parts
Radium Engineering fuel system parts support performance street, track, drag, and endurance builds with vehicle-specific and universal fuel delivery, crankcase ventilation, and fluid-control hardware. Shop fuel rails, regulators, surge tanks, fuel pump hangers, filters, catch cans, PTFE hose components, AN fittings, filler hardware, wiring, and service parts. Fuel Rails, Regulators, and Pump Systems Select fuel rails by engine, intake manifold, injector style, injector height, port configuration, and plumbing layout. Regulators must match the required pressure range, reference method, feed and return strategy, fuel type, and tuning requirements. Fuel hangers and surge tanks require exact pump, tank, wiring, vent, and level-sender compatibility. Catch Cans and Crankcase Ventilation Radium catch-can and air-oil-separator systems are configured for specific PCV, crankcase, and breather paths. Confirm engine, mounting location, hose routing, drain access, and whether the kit is vented ...
View Radium Engineering Fuel System Parts Products