Raxiom 16-23 Toyota Tacoma XW Series Sequential LED Tail Lights- Black Housing- Clear Lens

Sequential LED Tail Lights Built for the 2016-2023 Toyota Tacoma

The Raxiom RAXTT30331 XW Series Sequential LED tail lights transform the rear end of the 2016-2023 Toyota Tacoma with a black housing and clear lens design that pairs a blacked-out appearance with a sequential turn signal sweep. The RAXTT30331 replaces the factory tail light assemblies using the OEM mounting locations and wiring harness connectors for a direct plug-and-play installation. The sequential LED turn signal sweeps across the tail light assembly on activation, providing a modern, dynamic light signature. All functions including running lights, brake lights, reverse lights, and sequential turn signals use LED elements throughout the XW Series assembly.

Key Features

• XW Series sequential LED tail lights for 2016-2023 Toyota Tacoma
• Black housing with clear lens for a blacked-out, aggressive rear appearance
• Sequential LED turn signal sweep across the tail light face
• Full LED construction for running, brake, reverse, and turn signal functions
• Plug-and-play direct replacement for factory Tacoma tail light assemblies
• No wire cutting, splicing, or drilling required
• Sold as a pair (driver and passenger side)

Fitment

Specifications

What's Included

• 2x Raxiom XW Series Sequential LED Tail Light Assemblies (driver and passenger)
• Plug-and-play wiring connectors
• Hardware kit

Frequently Asked Questions

The RAXTT30331 fits the 2016-2023 Toyota Tacoma across all trims including SR, SR5, TRD Sport, TRD Off-Road, Limited, and TRD Pro. It does not fit first or second generation Tacoma models.

A sequential turn signal sweeps light progressively across the tail light assembly from inboard to outboard when the turn signal is activated, rather than flashing the entire light face at once. The RAXTT30331 uses this sequential LED sweep on both the driver and passenger side for a modern, eye-catching rear turn signal effect on the Tacoma.

Yes. The RAXTT30331 uses the factory wiring harness connectors on the 2016-2023 Tacoma. No wire modification is required. Remove the factory tail light assemblies, connect the Raxiom units to the factory plugs, and secure with the factory hardware.

Some 2016-2023 Tacoma vehicles may exhibit turn signal hyper-flash because the LED load differs from the factory bulb resistance. If hyper-flash occurs, an LED-compatible load resistor resolves the issue without any permanent modifications.

Raxiom designs their XW Series lighting products to meet applicable standards for street use on the 2016-2023 Toyota Tacoma. Confirm DOT compliance documentation with Raxiom directly if certification is required for your specific application.

Yes. The RAXTT30331 is a complete tail light assembly that includes all functions: running lights, brake lights, sequential turn signals, and reverse light. All functions use LED elements integrated within the XW Series assembly.

The XW Series designation indicates Raxiom's sequential LED turn signal line. XW Series units feature a progressive sequential sweep turn signal rather than a standard solid flash. The XW Series also uses a full LED internal layout for a consistent, layered light signature across all functions.

The black housing gives the Tacoma a blacked-out rear appearance where the internal components of the tail light are not visible through a dark tint. The clear lens allows the LED elements and black internal structure to show through when the lights are off, and the LEDs illuminate clearly through the clear lens when active.

Installation Notes

1. Open the tailgate and locate the tail light access panel or retaining screws inside the truck bed on each side.
2. Remove the retaining fasteners and pull the factory tail light assembly outward from the truck body.
3. Disconnect the factory wiring harness connector from the rear of each tail light.
4. Connect the Raxiom RAXTT30331 wiring connector to the factory harness plug on both sides.
5. Seat the new assembly into the tail light opening and reinstall all retaining hardware.
6. Test all functions before driving: running lights, brake lights, sequential turn signals, and reverse lights.

WARNING: This product can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.