View vehicle applications
Fitment notes and restrictions
Description
The Ridetech 2019-2026 Ram 1500 2WD/4WD Front HQ Coil-overs is an application-specific Ridetech coilover for 2019-2026 Ram 1500 and 11 additional listed applications.
Key Features
- Front HQ Series coil-over pair, two-wheel drive.
- Repeat on the opposite side, then cycle the suspension and check for clearance before driving.
Fitment
Use the complete application table and confirm any suspension, brake, drivetrain, and factory-equipment requirements stated for this exact part number.
| Years | Make | Model | Submodel |
|---|---|---|---|
| 2019-2026 | Ram | 1500 | Big Horn |
| 2026 | Ram | 1500 | Express |
| 2019-2024 | Ram | 1500 | HFE |
| 2019-2026 | Ram | 1500 | Laramie |
| 2019-2021 | Ram | 1500 | Laramie Longhorn |
| 2019-2024 | Ram | 1500 | Limited |
| 2021-2024 | Ram | 1500 | Limited Longhorn |
| 2019-2026 | Ram | 1500 | Lone Star |
| 2021 | Ram | 1500 | Longhorn |
| 2019-2024 | Ram | 1500 | Rebel |
| 2019-2026 | Ram | 1500 | Tradesman |
| 2025 | Ram | 1500 | Tradesman HFE |
Specifications
| Manufacturer | Ridetech |
|---|---|
| Manufacturer part number | 13133110 |
| Product type | Coilovers |
| Condition | New |
What's Included
One new Ridetech coilover matching manufacturer part number 13133110, with the components and hardware supplied by Ridetech for this exact configuration.
Brand Information
Ridetech develops application-specific coilover, air-suspension, steering, and chassis systems in Jasper, Indiana, with product families engineered for street performance, ride control, and installation as complete matched systems.
Related Parts
Frequently Asked Questions
Will this fit my vehicle?
Match the complete year, make, model, and any listed submodel in the fitment table. Also verify every drivetrain, suspension, brake, and factory-equipment note stated by Ridetech for this part number before ordering.
What setup is required after installation?
This is a adjustable suspension component. Set ride height and damping only within Ridetech's specified range, verify suspension travel and tire clearance, then complete an alignment and controlled road test.
Installation Instructions
Support the vehicle and unload the suspension before removing the original dampers or springs. Install the Ridetech components in the specified position, verify hose and reservoir clearance where present, torque fasteners at the instructed suspension position, then perform alignment and controlled road testing.




