Ridetech 31988150 RidePro air pressure sensor on white
Ridetech 31988150 pressure sensor connector detail
Ridetech 31988150 pressure sensor threaded-port detail
Click to zoom in
View vehicle applications

Description

Restore pressure feedback to a compatible RidePro control system

Ridetech 31988150 is a replacement air-pressure sensor for some RidePro E2 systems, all RidePro Digital systems and all RidePro X systems. It uses a 0-5 volt three-wire signal and a male 1/8-inch NPT connection, so system and connector compatibility must be confirmed before installation.

Key Features

  • Replacement pressure sensor for supported RidePro systems
  • 0-5 volt output signal
  • Three-wire electrical connection
  • Male 1/8-inch NPT pressure port
  • 150 psi product designation in current retailer catalog data
  • System-specific component with no year-make-model fitment

Application details and restrictions

Application Type Verified Compatibility and Requirements
RidePro system component Some RidePro E2, all RidePro Digital and all RidePro X systems; confirm controller, harness, connector, thread and pressure range before ordering.
Universal vehicle fitment No year-make-model fitment applies. Compatibility is determined by the exact RidePro system and sensor specification.

Specifications

Detail Value
Manufacturer Part Number 31988150
Signal 0-5 volt
Wiring Three wire
Thread Male 1/8-inch NPT
System Compatibility Some RidePro E2, all RidePro Digital and all RidePro X
Product Designation 150 psi
Quantity One sensor
UPC 840123503510

What's Included

  • air pressure sensor
  • Only the sensor and exact components supplied in the sealed Ridetech package
  • Controller, wiring harness, fittings, air line and sealant are not included unless explicitly supplied

About Ridetech

Ridetech develops electronic and pneumatic controls for matched air-suspension systems. Pressure sensors must be selected by controller generation, electrical signal, connector, thread and operating range rather than vehicle model alone.

Related Parts

  • Select replacement harnesses, controllers and pneumatic fittings only by the exact RidePro system and Ridetech part number; no unverified internal link is included.

FAQ

What is the 31988150?

It is ridepro air pressure sensor for the specified Ridetech RidePro E2, Digital and X control systems.

What application must be confirmed before ordering?

Confirm the exact RidePro controller generation, three-wire connector, 0-5 volt signal, male 1/8-inch NPT port and required pressure range.

What is included?

The exact supplied components are listed in the What's Included section; unrelated installation parts are not included.

Is this a universal product?

No broad universal fit is claimed. Use only the verified vehicle, dimensions, or companion product stated in the application section.

Does the listing include unrelated installation parts?

No. Only the exact component or kit identified in the included-items section is supplied.

Should existing components be inspected?

Inspect the harness, connector terminals, controller inputs, air fitting, threads and complete system for leaks or electrical faults before replacing the sensor.

Is professional installation recommended?

Professional installation is recommended whenever the work affects safety, pressurized fluid, suspension geometry, electrical wiring, or protective equipment setup.

What should be checked after installation?

Verify secure mounting, correct routing or clearance, proper function, and every manufacturer-specified post-installation check before normal use.

Installation Instructions

  1. Depressurize the air-suspension system and disconnect vehicle power according to the current Ridetech procedure.
  2. Confirm the old sensor and controller match the verified signal, wiring and thread specification.
  3. Disconnect the three-wire connector and remove the old sensor without stressing the harness or manifold.
  4. Install the replacement sensor using only the thread-sealing method approved for the system.
  5. Reconnect the harness, restore power and pressure, then inspect the threaded joint for leaks.
  6. Verify pressure readings across the normal operating range and complete any controller calibration required by Ridetech.

California Proposition 65 Warning: This product can expose you to chemicals including antimony oxide and other chemicals known to the State of California to cause cancer or reproductive harm. For more information, visit www.P65Warnings.ca.gov.

Ridetech 0-5 Volt Air Pressure Sensor for RidePro Systems

Ridetech
RID31988150
840123503510
Data Acquisition
1187 Units In Stock
$ 46.86
$ 46.86

Military & First Responders

Military & First Responders

A program for military members and first responders, with dedicated verification and support for your next build.

Learn More & Apply

Your cart

×