View vehicle applications
Fitment notes and restrictions
Description
Manual air spring inflation kit, used to air up 1 set of airsprings, front or rear. This kit includes two 1/4″ Push-to-Connect elbow fittings, one 1/4″ tube Push-to-Connect tee fitting, Push-to-Connect Schrader valve (Tire valve) and 30′ 1/4″ air line tube . This way you can air up 2 airsprings temporarily or permanently.
Key Features
- Manual air spring inflation kit with 1/4" elbow fittings.
- Repeat on the opposite side, then cycle the suspension and check for clearance before driving.
Fitment
Universal or Ridetech-system-specific component. Compatibility is determined by dimensions, mounting style, fittings, wiring, travel, and mating components rather than vehicle YMM alone.
Specifications
| Manufacturer | Ridetech |
|---|---|
| Manufacturer part number | 32000001 |
| Product type | Air Compressor Systems |
| Condition | New |
| Package dimensions | 2 × 2 × 2 in |
| Package weight | 2 lbs |
What's Included
This kit includes two 1/4″ Push-to-Connect elbow fittings, one 1/4″ tube Push-to-Connect tee fitting, Push-to-Connect Schrader valve (Tire valve) and 30′ 1/4″ air line tube .
Brand Information
Ridetech develops application-specific coilover, air-suspension, steering, and chassis systems in Jasper, Indiana, with product families engineered for street performance, ride control, and installation as complete matched systems.
Related Parts
Frequently Asked Questions
How do I confirm compatibility?
This is a universal or system-specific component rather than a vehicle YMM listing. Match the part number, dimensions, mounting style, travel, fittings, wiring, and mating Ridetech components to the planned installation.
What must be checked before operating the air system?
Verify the electrical load, fuse and ground requirements, fitting sizes, line routing, pressure rating, leak-free connections, and any required height-sensor calibration for this exact Ridetech system.
Installation Instructions
Mount components in protected locations, route air lines and wiring away from heat, sharp edges, and moving parts, and use the specified fittings and electrical protection. Leak-test every connection, verify compressor operation, and complete the Ridetech calibration procedure before driving.




