View vehicle applications
Fitment notes and restrictions
Description
Lower the back of your 2019-2026 Ram 1500 with Ridetech’s HQ Series Coil-overs. They offer a 3-4″ drop, are rebound adjustable and include mounting brackets for a bolt-on installation. The rear system also includes a new panhard bar to recenter the axle. Also includes new rear control arm mounts to maintain optimal pinion angle and geometry at the new lowered stance. Retains factory load capacity
Fitment
Use the complete application table and confirm any suspension, brake, drivetrain, and factory-equipment requirements stated for this exact part number.
| Years | Make | Model | Submodel |
|---|---|---|---|
| 2019-2026 | Ram | 1500 | Big Horn |
| 2026 | Ram | 1500 | Express |
| 2019-2024 | Ram | 1500 | HFE |
| 2019-2026 | Ram | 1500 | Laramie |
| 2019-2021 | Ram | 1500 | Laramie Longhorn |
| 2019-2026 | Ram | 1500 | Limited |
| 2021-2026 | Ram | 1500 | Limited Longhorn |
| 2019-2026 | Ram | 1500 | Lone Star |
| 2021 | Ram | 1500 | Longhorn |
| 2025-2026 | Ram | 1500 | RHO |
| 2019-2026 | Ram | 1500 | Rebel |
| 2020-2021 | Ram | 1500 | Special Service |
| 2025-2026 | Ram | 1500 | Special Service |
| 2019-2026 | Ram | 1500 | Tradesman |
| 2025 | Ram | 1500 | Tradesman HFE |
| 2025-2026 | Ram | 1500 | Tungsten |
| 2025-2026 | Ram | 1500 | Warlock |
Specifications
| Manufacturer | Ridetech |
|---|---|
| Manufacturer part number | 13136210 |
| Product type | Coilovers |
| Condition | New |
| Package dimensions | N/A |
| Package weight | 67 lbs |
What's Included
They offer a 3-4″ drop, are rebound adjustable and include mounting brackets for a bolt-on installation.
Brand Information
Ridetech develops application-specific coilover, air-suspension, steering, and chassis systems in Jasper, Indiana, with product families engineered for street performance, ride control, and installation as complete matched systems.
Related Parts
Frequently Asked Questions
Will this fit my vehicle?
Match the complete year, make, model, and any listed submodel in the fitment table. Also verify every drivetrain, suspension, brake, and factory-equipment note stated by Ridetech for this part number before ordering.
What setup is required after installation?
This is a adjustable suspension component. Set ride height and damping only within Ridetech's specified range, verify suspension travel and tire clearance, then complete an alignment and controlled road test.
Installation Instructions
Support the vehicle and unload the suspension before removing the original dampers or springs. Install the Ridetech components in the specified position, verify hose and reservoir clearance where present, torque fasteners at the instructed suspension position, then perform alignment and controlled road testing.




