RockJock RJ-255200-101 rear Gladiator Antirock mounting bolts, nuts, washers, and spacers
Click to zoom in
View vehicle applications

Description

Replace the rear Antirock mounting fasteners without buying another sway bar kit

RockJock RJ-255200-101 is the complete mounting-hardware pack used with the standard-rate and heavy-rate rear Antirock kits for the Jeep Gladiator JT. It groups the bolts, nuts, washers, and spacers required at the kit mounting points while clearly excluding the separate arm and end-link hardware packs.

Key Features

  • RJ-255200-101 exact rear Antirock mounting-hardware configuration
  • Supports both the 25-spline standard-rate and 28-spline heavy-bar JT rear kits
  • Includes frame, bracket, spacer, and misalignment hardware listed by RockJock
  • Complete service pack for the documented Antirock mounting points
  • Arm hardware and end-link hardware remain separate kit-specific items
  • Exact-product image shows the supplied fasteners and spacers

Fitment

Years Make Model Verified Application and Notes
2020-2026 Jeep Gladiator JT Rear RockJock Antirock kit RJ-256200-101, 25-spline bar
2020-2026 Jeep Gladiator JT Rear RockJock Antirock kit RJ-256200-103, 28-spline heavy bar
Excluded RockJock Other sway bar kits No manufacturer-confirmed compatibility for this exact hardware pack

Specifications

Detail Value
Manufacturer Part Number RJ-255200-101
Product Type Rear Antirock mounting hardware pack
Compatible Standard-Rate Kit RJ-256200-101
Compatible Heavy-Rate Kit RJ-256200-103
Vehicle Platform Jeep Gladiator JT
Mounting Position Rear
Country of Manufacture United States

What's Included

  • Four 1/2-20 x 2-1/4-inch hex bolts, part RJ-501202-1
  • Two 1/2-13 x 1-inch hex bolts, part RJ-501203-1
  • Four 1/2-inch-ID heim-joint misalignment spacers, part RJ-524200-1
  • Four 1/2-inch flat washers, part CE-H0014
  • Two 1/2-20 wedge nuts, part RJ-151400-1
  • Two 1/2-20 nyloc nuts, part CE-95615A220
  • Two 1/2-13 strut-channel nuts, part RJ-502201-1
  • Four M8-1.25 x 40 mm flanged hex bolts, part RJ-501108-1
  • Four steel spacers, part RJ-524100-1
  • Two 3/8-16 x 1-inch flanged hex-head bolts, part CE-92316A624
  • Two 1/4-20 x 3/8-inch serrated flanged hex bolts, part RJ-501204-1
  • The RJ-255200-101 pack does not include RJ-520201-101 arm hardware or hardware supplied with the end-link and double-shear bracket kits

About RockJock

RockJock designs Antirock sway bar systems and service components for Jeep and off-road applications. Its replacement packs group the exact fasteners and spacers used at documented mounting locations so owners can service a kit without substituting unverified hardware.

Related Parts

  • RJ-520201-101 rear Antirock arm hardware pack, required separately when that hardware is being serviced
  • RJ-253200-101 rear Antirock end-link kit, which includes its own hardware
  • RJ-201000-101 double-shear end-link bracket kit, which includes its own hardware

FAQ

What is the RJ-255200-101?

It is the complete mounting-hardware service pack for the two documented RockJock rear Antirock kits used on the Jeep Gladiator JT.

Which Antirock kits use this hardware pack?

RockJock lists rear kits RJ-256200-101 with the 25-spline bar and RJ-256200-103 with the 28-spline heavy bar.

Is the sway bar included?

No. This product contains mounting hardware only and does not include a torsion bar, arms, brackets, bushings, or end links.

Is the sway-bar arm hardware included?

No. RockJock specifically excludes the separate RJ-520201-101 arm hardware pack.

Is the end-link hardware included?

The hardware supplied with the RJ-253200-101 end-link kit and RJ-201000-101 double-shear bracket kit is not included.

Does this fit a front Antirock kit?

No. The manufacturer identifies this pack for the supported Gladiator JT rear Antirock kits.

Can generic fasteners be substituted?

Use only hardware that matches the RockJock part numbers, grades, dimensions, and installation instructions for the kit.

What should be checked during installation?

Verify every fastener location and torque value against the current rear Antirock manual, then inspect clearance and retorque as directed after use.

Installation Instructions

  1. Confirm the package identifies RJ-255200-101 and the installed rear Antirock kit is RJ-256200-101 or RJ-256200-103.
  2. Support the Jeep safely at approved lift points and unload the rear sway bar according to the current RockJock manual.
  3. Inventory every bolt, nut, washer, misalignment spacer, and steel spacer against the manufacturer list before disassembly.
  4. Replace one mounting group at a time so bracket, spacer, and fastener orientation remain clear.
  5. Do not substitute this pack for the separate arm, end-link, or double-shear bracket hardware.
  6. Start all fasteners by hand and align the brackets without forcing threads or trapping components out of position.
  7. Torque every fastener to the current RockJock rear Antirock specification using calibrated tools.
  8. Cycle the suspension, check sway-bar and end-link clearance, and complete the documented post-installation retorque inspection.

California Proposition 65 Warning: Cancer and reproductive harm. See www.P65Warnings.ca.gov.

RockJock Rear Antirock Mounting Hardware Pack for Jeep Gladiator JT

RockJock
ROKRJ-255200-101
Sway Bar Mounting Hardware Kit
1 Units In Stock
$ 150.00
$ 150.00

Military & First Responders

Military & First Responders

A program for military members and first responders, with dedicated verification and support for your next build.

Learn More & Apply

Your cart

×