RockJock RJ-246102-101 front Antirock sway bar kit
RockJock RJ-246102-101 billet arm and bracket components
RockJock RJ-246102-101 front Antirock kit alternate view
Click to zoom in
View vehicle applications

Description

Increase front suspension articulation without stopping to disconnect the bar

RockJock RJ-246102-101 replaces the factory front sway bar on supported Jeep Wrangler JL and Gladiator JT applications. Its 0.770-inch 4340 heat-treated chromoly torsion bar, CNC-machined 7075 aluminum arms, billet frame brackets, UHMW bushings, and adjustable links are intended for lighter JL and JT configurations where the verified engine, load, lift, and clearance requirements are met.

Key Features

  • Directly replaces the supported Jeep factory front sway bar
  • RJ-246102-101 remains connected during off-road use
  • 0.770-inch 4340 heat-treated chromoly torsion bar
  • CNC-machined billet 7075 aluminum sway-bar arms
  • Billet aluminum frame brackets and UHMW bushings
  • Adjustable sway-bar end links are included
  • Two-position front bar supports setup adjustment
  • Bolt-on installation uses the factory frame and axle mounting areas

Application details and restrictions

Years Make Model Verified Configuration and Restrictions
2018-2026 Jeep Wrangler JL / Wrangler Unlimited JL 3.6L V6 or 2.0L turbo. RockJock recommends the heavier 0.850-inch kit for diesel, 392, and 4xe models.
2020-2026 Jeep Gladiator JT 3.6L V6 in lighter applications. Heavier or loaded builds should use the manufacturer-recommended heavier bar.
2020-2026 Jeep Gladiator Mojave Fits, but the factory shock reservoirs must be relocated when the original Mojave shocks remain installed.
2018-2026 Jeep Wrangler or Gladiator Rubicon Electronic-sway-bar models require a compatible tuner to turn off the dash warning after factory-bar removal.

Specifications

Detail Value
Manufacturer Part Number RJ-246102-101
Position Front
Torsion Bar Diameter 0.770 in / 19.56 mm
Torsion Bar Material 4340 heat-treated chromoly
Adjustment Two position
Arms CNC-machined billet 7075 aluminum
Frame Brackets Billet aluminum
Bushings UHMW
End Links Adjustable; supplied length targets a 3.5-inch RockJock suspension
UPC 810038158419

What's Included

  • One RockJock RJ-246102-101 0.770-inch front Antirock torsion bar
  • Two billet 7075 aluminum arms and left- and right-side billet frame brackets
  • UHMW bushings, adjustable end links, sway-bar arm hardware, frame hardware, and installation guidance
  • A tuner, Mojave reservoir-relocation parts, alternate-length links, frame shims, tools, and heavier-rate bars are not included

About RockJock

RockJock develops Antirock sway-bar systems around heat-treated chromoly torsion bars, serviceable mounting components, and application-specific rates. The correct bar must be selected around engine weight, vehicle load, lift height, electronic-sway-bar equipment, and intended handling.

Related Parts

  • No internal alternate bar, link, tuner, or shim is linked because each companion part must match the exact engine, load, lift height, frame width, and installed suspension.

FAQ

What is the RJ-246102-101?

It is a front Antirock sway-bar kit with a 0.770-inch bar and billet arms for supported Wrangler JL and lighter Gladiator JT applications.

Which engines are the primary application?

RockJock lists JL models with the 3.6L V6 or 2.0L turbo and JT models with the 3.6L V6.

Is it the recommended bar for diesel, 392, or 4xe models?

No. RockJock recommends its heavier 0.850-inch kit for those higher-weight configurations, although the lighter bar may be chosen only when its lower rate is specifically desired.

Can it be used on a Gladiator?

Yes, for supported 3.6L Gladiator applications, but RockJock recommends a heavier bar for loaded or overland builds.

What changes on a Mojave?

The kit bolts on, but the factory shock reservoirs must be relocated if the original Mojave shocks remain in place.

What is required on a Rubicon with an electronic sway bar?

A compatible tuner is required to turn off the sway-bar dash warning after the factory electronic unit is removed.

Do the included links fit every lift height?

No. Their supplied length targets RockJock's 3.5-inch suspension and may require an approved shorter, longer, or trimmed arrangement for another ride height.

Will on-road handling remain the same as stock?

No. Antirock-equipped vehicles exhibit more body roll and do not retain the same handling characteristics as the factory sway bar.

Installation Instructions

  1. Confirm RJ-246102-101, engine, vehicle load, lift height, frame width, electronic-sway-bar equipment, and every application restriction before disassembly.
  2. Support the Jeep safely, remove the factory front sway bar, and inspect the frame and axle mounting points.
  3. Install the billet frame brackets and UHMW bushings in the manufacturer-specified orientation.
  4. Center the torsion bar, install both billet arms at equal indexing, and fit any approved shims required for actual frame width.
  5. Set the adjustable end links without preload at ride height and use an approved alternate length when the supplied 3.5-inch-lift links are unsuitable.
  6. Relocate Mojave shock reservoirs or configure the Rubicon dash-warning solution when those verified requirements apply.
  7. Cycle the suspension and inspect tire, brake-line, shock, reservoir, frame, arm, link, and bolt-head clearance through full travel.
  8. Torque all hardware to the current RockJock instructions, road-test cautiously, and recheck arm position, link clearance, and fasteners after initial use.

California Proposition 65 Warning: This product can expose you to chemicals known to the State of California to cause cancer or reproductive harm. For more information, visit www.P65Warnings.ca.gov.

RockJock Front Antirock Sway Bar Kit for 2018-2026 Jeep Wrangler JL and 2020-2026 Gladiator JT

RockJock
ROKRJ-246102-101
810038158419
Sway Bars
16 Units In Stock
$ 1,490.00
$ 1,490.00

Military & First Responders

Military & First Responders

A program for military members and first responders, with dedicated verification and support for your next build.

Learn More & Apply

Your cart

×