Click to zoom in
This RockJock Brake Line Relocation Bracket Kit Front Pair is identified by manufacturer part number RJ-141300-101. Confirm the vehicle or mating RockJock system, axle or mounting position, dimensions, thread or joint interface, and included quantity before ordering.
Key Features
- without ever cracking a brake line!Additionally, this kit eliminates the need for aftermarket brake hoses that force you to bleed your brake system after their installation
- Long Hex Bolt: RJ-501206-1 5/16 in
- Flat Washer: CE-90126A030 5/16 in
- Exact-part-number brackets for the stated vehicle or RockJock system
Fitment
| Years | Make | Model | Application |
|---|---|---|---|
| 2020-2024 | Jeep | Gladiator | All supported models |
| 2018-2025 | Jeep | Wrangler | All supported models |
| 2018-2025 | Jeep | Wrangler | Unlimited |
Specifications
| Brand | RockJock |
|---|---|
| Manufacturer Part Number | RJ-141300-101 |
| Product Type | Brackets |
| Fitment Type | Vehicle Specific |
| Condition | New |
What's Included
One new RockJock brackets in the quantity and configuration stated for manufacturer part number RJ-141300-101. Companion suspension, steering, axle, hardware, tools, and accessories are included only when expressly listed.
Brand Information
RockJock 4x4 by John Currie develops suspension, steering, axle, joint, sway-bar, and service components for Jeep, Ford Bronco, and custom off-road applications. Selection and installation must follow the exact part number, vehicle or mating system, dimensions, mounting position, adjustment range, and current manufacturer instructions.
Related RockJock Products
- Shop all RockJock products
- RockJock Steering Stabilizer Shock Bracket Kit Fits 1 1/4in Rods Included in CE-9701 Kit
- RockJock Gladiator Driveshaft Carrier Bearing Spacer Rear w Billet Aluminum Spacer Hardware
- RockJock Steering Stabilizer Shock Bracket Kit Fits 1 5/8in Rods
Frequently Asked Questions
Will this RockJock brackets fit a different vehicle?
Only the applications shown in the fitment table are supported. Match the exact year, make, model, body style when required, axle or mounting position, factory equipment, and every current manufacturer note before ordering.
What is included with RockJock RJ-141300-101?
The listing includes the exact new component, pair, or kit stated for this manufacturer part number. Companion arms, joints, springs, brackets, steering parts, hardware, tools, and accessories are included only when expressly listed.
What should be checked during installation?
Verify every mounting point, joint orientation, thread engagement, axle position, steering and brake-line clearance, fastener grade, torque value, and alignment requirement. Recheck adjustment and fastener torque after initial use.
Installation Instructions
Follow the current RockJock instructions for manufacturer part number RJ-141300-101. Support the vehicle safely, test-fit every component, verify orientation and clearances, use the specified hardware and torque values, complete alignment or calibration when required, and inspect every fastener and adjustment after initial use.
Brackets
Brackets and mounting hardware for trucks, SUVs, and performance cars are stocked at Black Ops Auto Works. Shop bumper mounting brackets, light bar and sensor relocation brackets, exhaust hanger kits, leaf spring and track bar brackets, caliper brackets, and roof rack mounting brackets for Ford, RAM, Chevrolet, Jeep, Subaru, and Toyota platforms. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 472 bracket SKUs across bumper, suspension, exhaust, and accessory mounting categories. What This Category Covers Brackets are the mounting hardware that secures bumpers, light bars, sensors, exhaust systems, suspension components, and roof accessories to a vehicle chassis or body. Because brackets support such a wide range of systems, this collection spans multiple vehicle platforms and use cases rather than a single category, from off-road bumper hardware to exhaust hanger kits to suspen...
View Brackets Products
Fabrication
Shop automotive fabrication parts, tubing, fittings, hoses, clamps, and welding supplies at Black Ops Auto Works. Find components for custom exhaust routing, intake plumbing, fuel and oil lines, mounting solutions, and heat protection. Compare materials and hardware from Vibrant Performance, Stainless Bros, Ticon Industries, Radium Engineering, Mishimoto, Kooks, and other brands by exact dimensions and intended application. Stainless Steel, Aluminum, and Titanium Tubing Choose tubing, bends, and fabrication sections for your project’s routing and material requirements. This collection includes steel, aluminum, and titanium tubing categories, with selected T304 and SS321 stainless products. Compare outside diameter, wall thickness, straight length, bend angle, and centerline radius before planning cuts and joints. Explore the Stainless Bros collection for additional stainless tubing, mandrel bends, pie cuts, flanges, and exhaust fabrication components. Exhaust Flanges, Clamps, and Sl...
View Fabrication Products