Rywire RY-RELAY-OBD0 main relay upgrade and kill switch harness
Click to zoom in
View vehicle applications

Description

Replace the failure-prone factory relay and add a removable start inhibit

Rywire RY-RELAY-OBD0 plugs into the factory main-relay connector on early OBD0 Honda and Acura vehicles. The harness replaces the Honda-specific relay with a standard automotive-grade relay and adds an isolation toggle that can be disconnected as a simple vehicle-security measure without cutting or splicing the original wiring.

Key Features

  • Plug-and-play connection to the supported factory OBD0 main-relay connector
  • Uses a replaceable standard automotive-grade relay
  • Removable isolation toggle interrupts the main-relay circuit
  • No cutting or splicing is required for the verified connector application
  • Installation is reversible when the original relay configuration is retained
  • OBD0 version is distinct from Rywire's separate OBD1/OBD2 harness

Application details and restrictions

Application Type Verified Requirement Exclusions
Interface-specific Early / pre-1992 Honda or Acura with the matching OBD0 factory main-relay connector Not the OBD1/OBD2 version. Confirm the actual connector against Rywire's OBD0 images before ordering.

Specifications

Detail Value
Manufacturer Part Number RY-RELAY-OBD0
Product Type Main relay upgrade and kill-switch harness
Interface Honda / Acura OBD0 factory main-relay connector
Vehicle Era Early / pre-1992 applications with matching OBD0 connector
Relay Standard automotive-grade replacement relay
Security Control Removable isolation toggle
Installation Plug and play; no cutting or splicing stated

What's Included

  • One OBD0 main-relay upgrade harness
  • One standard automotive-grade relay
  • One removable isolation toggle / kill switch and its jumper connection
  • The separate OBD1/OBD2 harness, tools, mounting hardware not supplied by Rywire, and unrelated chassis wiring are not included

About Rywire

Rywire Motorsport Electronics develops engine, chassis, adapter, and relay harnesses for performance vehicles. Its main-relay upgrade separates the OBD0 and OBD1/OBD2 connector families so the installed chassis interface must be confirmed before ordering.

Related Parts

  • No external or internal harness is linked because the correct companion wiring must be selected by the actual OBD generation, factory connector, chassis condition, and electrical plan.

FAQ

What is the RY-RELAY-OBD0?

It is the OBD0 version of Rywire's plug-and-play main-relay upgrade and removable isolation-switch harness.

Which vehicles use this version?

Rywire identifies the OBD0 version for early Honda and Acura vehicles; confirm the factory connector shown in the manufacturer images before ordering.

Will it fit a 1992-or-later OBD1 or OBD2 vehicle?

No. Rywire specifies the separate OBD1 version for 1992-and-later OBD1 vehicles, and that version also supports OBD2 applications.

Does installation require cutting the factory harness?

No. Rywire describes the correct-version installation as plug and play at the factory main-relay connector.

Why replace the original Honda relay?

The harness substitutes a common automotive-grade relay for the harder-to-source Honda-specific main relay, a known failure point on older vehicles.

How does the isolation switch work?

Disconnecting the removable toggle interrupts the main-relay circuit so the vehicle cannot start normally until it is reconnected.

Is this a complete alarm system?

No. It is a removable relay-isolation switch and should be treated as one layer of vehicle security, not a replacement for a complete alarm or immobilizer system.

What must be checked before installation?

Confirm OBD generation, connector shape, terminal condition, wire integrity, relay location, mounting clearance, and the absence of prior wiring modifications.

Installation Instructions

  1. Confirm the vehicle uses the early Honda or Acura OBD0 main-relay connector shown by Rywire and is not an OBD1/OBD2 application.
  2. Disconnect the battery according to the vehicle service information and locate the factory main relay in a dry, serviceable area.
  3. Inspect the connector and surrounding wiring for heat damage, corrosion, loose terminals, or previous modifications before adding the harness.
  4. Disconnect the original relay and plug the upgrade harness into the matching factory connector without forcing or repinning it.
  5. Secure the standard relay and route the removable isolation toggle away from heat, abrasion, pedals, steering components, and sharp edges.
  6. Reconnect the battery, verify normal fuel-pump prime and starting with the switch connected, then verify the intended no-start condition with it removed.
  7. Correct any electrical fault before road use and retain access to the relay for future service.

Rywire OBD0 Main Relay Upgrade and Kill Switch Harness

Rywire
RYWRY-RELAY-OBD0
Wiring Connectors
1 Units In Stock
$ 53.74
$ 53.74

Military & First Responders

Military & First Responders

A program for military members and first responders, with dedicated verification and support for your next build.

Learn More & Apply

Your cart

×