-10%
Seibon Seibon 08-10 Mitsubishi Lancer Evo X CSL-Style Carbon Fiber Trunk/Hatch
Seibon Seibon 08-10 Mitsubishi Lancer Evo X CSL-Style Carbon Fiber Trunk/Hatch
Seibon Seibon 08-10 Mitsubishi Lancer Evo X CSL-Style Carbon Fiber Trunk/Hatch
Seibon Seibon 08-10 Mitsubishi Lancer Evo X CSL-Style Carbon Fiber Trunk/Hatch
Seibon Seibon 08-10 Mitsubishi Lancer Evo X CSL-Style Carbon Fiber Trunk/Hatch
Click to zoom in

Seibon 08-10 Mitsubishi Lancer Evo X CSL-Style Carbon Fiber Trunk/Hatch

Seibon
SEITL0809MITEVOX-C
887753481153
Trunks
19 Units In Stock - Ships Next Business Day
$ 1,400.00 $ 1,260.00
$ 1,260.00

Lightweight carbon fiber trunk lid for the 2008-2015 Mitsubishi Lancer

The Seibon TL0809MITEVOX-C is a hand-laid 3K 2x2 twill weave carbon fiber over a fiberglass skeleton trunk lid built specifically for the 2008-2015 Mitsubishi Lancer. The UV-resistant gloss clear coat is factory-applied and ready to install. At up to 50% lighter than the OEM steel equivalent, it reduces unsprung weight for measurable gains in acceleration, braking balance, and cornering response.

Key Features

  • Dramatic Weight Reduction: Eliminates the heavy OEM steel trunk lid, reducing rear unsprung weight for better handling balance and improved acceleration.
  • 3K 2x2 Twill Weave: Hand-laid carbon fiber construction with a high carbon-to-resin ratio delivers consistent panel stiffness and a show-quality gloss finish.
  • UV-Resistant Clear Coat: Factory-applied gloss protects the weave pattern from sun exposure without any paint prep required.
  • Direct OEM Replacement: Pre-drilled mounting points use factory latch, torsion bars, and strut hardware for straightforward installation.
  • Seibon Fitment Guarantee: Every trunk is test-fit against the target vehicle before production to ensure proper gap alignment.
  • Professional Grade: Same construction methods trusted by Seibon's motorsport customers worldwide for over two decades.

This Part Fits

Year Range Make Model Trim
2008 Mitsubishi Lancer Evolution GSR
2008 Mitsubishi Lancer Evolution MR
2010-2015 Mitsubishi Lancer Evolution GSR
2010-2015 Mitsubishi Lancer Evolution MR
2011 Mitsubishi Lancer Evolution MR Touring
2015 Mitsubishi Lancer Evolution Final Edition

Specifications

Detail Value
Part Number TL0809MITEVOX-C
UPC 887753481153
Material 3K 2x2 twill weave carbon fiber
Finish Gloss UV-resistant clear coat
Construction Hand-laid with fiberglass skeleton
Weight Savings Up to 50% lighter than OEM equivalent
Hardware Uses OEM mounting hardware; not included
Warranty Seibon 6-month limited clear coat warranty; fitment guarantee

What's Included

  • 1x Seibon carbon fiber trunk lid
  • Pre-drilled mounting holes for OEM hardware
  • Hardware not included; reuse OEM latch, hinges, and wiring

Installation

  1. Gather tools: 10mm socket, panel pop tool, torque wrench, painter's tape, and a helper.
  2. Open the OEM trunk fully. Disconnect any trunk light wiring harness, release cable, and lock actuator connectors inside the trunk.
  3. Note or photograph the OEM torsion bar routing before removal. Seibon strongly recommends removing and not reinstalling OEM gas struts or torsion bars, as they may prevent the lighter carbon trunk from closing.
  4. With a helper supporting the trunk lid, remove the four hinge bolts (two per side) using a 10mm socket.
  5. Lift the OEM trunk off and set aside.
  6. Transfer the latch assembly, license plate lights, and any trim pieces to the new carbon trunk lid.
  7. Position the carbon trunk lid onto the hinges and thread hinge bolts by hand before torquing.
  8. Check gaps along both fender edges (target 3-5mm even clearance on each side).
  9. Torque hinge bolts to 20-25 Nm. Never exceed 30 Nm on carbon fiber panels.
  10. Reconnect wiring harness, release cable, and lock actuator.
  11. Open and close the trunk 5-10 times to settle. Adjust bump stops or latch striker as needed for flush fitment.

Frequently Asked Questions

Does the trunk come painted or in raw carbon?

This trunk lid comes with a UV-resistant gloss clear coat applied over the 3K 2x2 twill weave. No painting is required. If you want a color-matched finish, a body shop can paint over the clear coat after proper preparation.

Can I reinstall my OEM torsion bars or struts?

Seibon strongly recommends against reinstalling OEM torsion bars, gas struts, or dampers. Because the carbon trunk is significantly lighter than OEM steel, these mechanisms can prevent the trunk from closing fully or crack the mounting points over time.

What is the warranty on this product?

Seibon provides a fitment guarantee covering gaps wider than 1/2 inch at the rear fenders, and a 6-month limited clear coat warranty covering heavy cloudiness, bubbles larger than 3/8 inch, or major shade shifts. Under the Magnuson-Moss Warranty Act, this aftermarket trunk lid does not void your vehicle's factory warranty for unrelated systems.

How difficult is installation?

Installation follows the same process as an OEM trunk replacement. An experienced DIY enthusiast can complete it with basic hand tools. Seibon recommends a helper to support the panel during hinge bolt installation and gap adjustment.

Will this trunk fit cars that have had bodywork or accident repairs?

Seibon does not guarantee fitment on vehicles that have been in accidents or had body damage. On a structurally sound, unmodified vehicle, fitment is guaranteed per Seibon's published standards.

Does it come with all necessary hardware?

The trunk lid does not include new hardware. Transfer the OEM latch, striker, hinge bolts, and wiring connectors from your original trunk. All OEM mounting points are pre-drilled.

How do I care for the carbon fiber finish?

Wash with mild soap and a microfiber cloth. Apply a UV-protectant wax after every wash. Avoid automatic car washes with abrasive brushes. An additional clear coat layer applied annually will significantly extend the life of the finish.

Is this product street legal?

Seibon products are intended for off-highway and motorsport use. Buyers are responsible for verifying compliance with applicable state and local regulations before street use.

WARNING: This product can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.

Request For Information

Have questions about ? Fill out the form below and we'll get back to you by the next business day.
Carbon Fiber Parts & Accessories

Carbon Fiber Parts & Accessories

Carbon fiber parts and accessories for Jeep Grand Cherokee, Trackhawk, Dodge Charger, Challenger, Durango, Chrysler 300, Ford Mustang, and Chevrolet Camaro and Corvette are stocked at Black Ops Auto Works. Shop carbon fiber hoods, front splitters, rear spoilers, diffusers, side skirts, mirror covers, headlight covers, badges, and interior trim for Hellcat, Trackhawk, Demon, SRT, and HEMI 6.2L and 6.4L platforms. Every part is filterable by year, make, model, trim, and engine so the correct fitment ships the first time. Black Ops Auto Works carries 2,338 carbon fiber SKUs across hoods, aero, and trim categories. What This Category Covers Carbon fiber parts combine weight reduction with aggressive styling for builds that want a performance look without sacrificing strength. This category spans full hood replacements, splitters and diffusers for aerodynamic upgrades, and smaller trim and badge pieces that finish off an interior or exterior refresh. Why Carbon Fiber Carbon fiber pan...

View Carbon Fiber Parts & Accessories Products
Exterior Parts & Accessories

Exterior Parts & Accessories

Exterior parts and accessories for cars, trucks, SUVs, and Jeeps are stocked at Black Ops Auto Works. Shop bumpers, grilles, fender flares, running boards, nerf bars, tonneau covers, mud flaps, front lips, splitters, spoilers, diffusers, body kits, carbon fiber panels, roof racks, bed accessories, tow hooks, and car covers for daily drivers, work trucks, and performance builds. Every product is filterable by category, brand, and vehicle year, make, model, and trim so the correct fitment ships the first time. Black Ops Auto Works carries 9,697 exterior parts SKUs across style, protection, and utility categories. What This Category Covers Exterior parts change how a vehicle looks, protects itself, and hauls gear. Fitment depends on body style, cab and bed configuration, and factory sensor or camera equipment, so confirm compatibility before ordering. Appearance Upgrades Grilles, front lips, splitters, spoilers, diffusers, and body kits update the front end and aero character of a ...

View Exterior Parts & Accessories Products
Exterior Styling

Exterior Styling

Exterior styling parts and accessories for cars, trucks, and SUVs are stocked at Black Ops Auto Works. Shop spoilers, front splitters, rear diffusers, side skirts, body kits, carbon fiber hoods and trunks, fender flares, badges and emblems, mirror covers, chrome delete trim, and window vents for Jeep Grand Cherokee Trackhawk, Dodge Charger and Challenger, RAM TRX, Chevrolet Camaro and Corvette, and Hellcat and SRT platforms. Every product is filterable by year, make, model, trim, and body style so the correct part ships the first time. Black Ops Auto Works carries 2,389 exterior styling SKUs across aerodynamic, carbon fiber, and badge and trim categories. What This Collection Covers Exterior Styling groups together the parts that change the visual character and aerodynamics of a vehicle, from functional front splitters and rear diffusers to purely cosmetic badges and mirror covers. This collection combines Black Ops Auto Works in-house carbon fiber and fiberglass components with...

View Exterior Styling Products
Seibon

Seibon

Seibon carbon fiber parts for import sport compacts and sports cars are stocked at Black Ops Auto Works. Shop carbon fiber hoods, trunks, front lips, spoilers, fenders, doors, side skirts, and mirror caps for Toyota Supra and GR Corolla, Honda Civic and S2000, Acura Integra and NSX, Subaru WRX and BRZ, Nissan Z and GT-R, and Mitsubishi Evo platforms. Every product is filterable by year, make, model, trim, and body style so the correct part ships the first time. Black Ops Auto Works carries 815 Seibon SKUs across hoods, trunks, aero, and exterior styling categories. What This Collection Covers Seibon builds carbon fiber body panels for a wide range of import sport compacts and sports cars, and each hood, trunk, or lip is molded to the specific body lines of one platform. This collection groups Seibon parts by the exact vehicle they were designed for so Supra, Civic, WRX, 370Z, and Evo owners can shop their correct application. Platforms We Cover Seibon offers vehicle-specific car...

View Seibon Products
Trunks

Trunks

Carbon fiber trunk lids, decklids, hatches, and rear trim change the rear profile of a street, show, or track build while reducing weight on many applications. Shop model-specific replacement trunk lids for Dodge Charger, Chevrolet Camaro, Honda Civic, Subaru WRX STI and BRZ, Toyota GR Supra, Corvette, and more. Black Ops Auto Works carries 147 trunk SKUs across carbon fiber, fiberglass, OEM-style, vented, and spoiler-integrated designs. Filter by year, make, model, body style, and power-trunk equipment to select the correct rear panel. What This Trunk Collection Covers This collection focuses on exterior trunk lids, rear decklids, hatch panels, and trunk garnishes rather than storage accessories. Parts range from OEM-style replacement panels to aggressive carbon fiber pieces with integrated spoilers and vents. Decklid, trunk lid, and hatch differences A decklid or trunk lid is the rear closure panel on a sedan or coupe. A hatch is the larger rear opening panel on a hatchback. F...

View Trunks Products
Military & First Responder Discounts

Military & First Responder Discount Program

Black Ops Auto Works proudly honors active duty military, veterans, National Guard, reserves, police officers, firefighters, and EMTs with an exclusive 5% discount on all performance parts and carbon fiber upgrades. Verify instantly and start saving today.

Learn More & Apply

Your cart

×