The Seibon EC23TYGRCOR is a hand-laid 3K 2x2 twill weave carbon fiber over a fiberglass skeleton engine cover built specifically for the compatible vehicles. The UV-resistant gloss clear coat is factory-applied and ready to install. At up to 50% lighter than the OEM steel equivalent, it reduces unsprung weight for measurable gains in acceleration, braking balance, and cornering response.
| Detail | Value |
|---|---|
| Part Number | EC23TYGRCOR |
| Material | 3K 2x2 twill weave carbon fiber |
| Finish | Gloss UV-resistant clear coat |
| Construction | Hand-laid with fiberglass skeleton |
| Weight Savings | Up to 50% lighter than OEM equivalent |
| Hardware | Uses OEM mounting hardware; not included |
| Warranty | Seibon 6-month limited clear coat warranty; fitment guarantee |
Most engine covers use rubber grommet mounts and require no tools. The cover lifts off and presses back on. Confirm the mounting style for your specific vehicle.
Is this heat resistant?The carbon fiber and clear coat used by Seibon are formulated to handle engine bay temperatures. Avoid direct contact with exhaust manifolds or turbo components.
What is the warranty?Seibon provides a fitment guarantee and a 6-month limited clear coat warranty. Under the Magnuson-Moss Warranty Act, this product does not void your factory warranty.
Does it come painted or in raw carbon?The cover comes with a UV-resistant gloss clear coat applied over the 3K 2x2 twill weave. No painting is required.
Can I paint this to match my engine bay?Yes. The surface can be painted after light sanding and primer application by a professional.
How do I clean it?Wipe with a damp microfiber cloth. Apply a UV-protectant detailer spray for ongoing protection. Avoid harsh engine degreasers on the carbon surface.
Is this compatible with aftermarket intake systems?Fitment is based on the OEM engine layout. Aftermarket intakes that change engine cover clearance may require fitment verification.
Will this fit with a cold air intake installed?Verify with your specific intake manufacturer. Many OEM engine cover designs clear common aftermarket intakes without issue, but this depends on the intake routing.
Carbon fiber parts and accessories for Jeep Grand Cherokee, Trackhawk, Dodge Charger, Challenger, Durango, Chrysler 300, Ford Mustang, and Chevrolet Camaro and Corvette are stocked at Black Ops Auto Works. Shop carbon fiber hoods, front splitters, rear spoilers, diffusers, side skirts, mirror covers, headlight covers, badges, and interior trim for Hellcat, Trackhawk, Demon, SRT, and HEMI 6.2L and 6.4L platforms. Every part is filterable by year, make, model, trim, and engine so the correct fitment ships the first time. Black Ops Auto Works carries 2,338 carbon fiber SKUs across hoods, aero, and trim categories. What This Category Covers Carbon fiber parts combine weight reduction with aggressive styling for builds that want a performance look without sacrificing strength. This category spans full hood replacements, splitters and diffusers for aerodynamic upgrades, and smaller trim and badge pieces that finish off an interior or exterior refresh. Why Carbon Fiber Carbon fiber pan...
View Carbon Fiber Parts & Accessories Products
Engine parts and engine bay upgrades for Dodge, Jeep, RAM, Chrysler, Chevrolet, Ford, Toyota, Nissan, Subaru, and Honda vehicles are stocked at Black Ops Auto Works. Shop oil catch cans, supercharger pulleys, thermostats, radiators, cooling parts, throttle bodies, intake manifolds, headers, ignition coils, spark plugs, sensors, gaskets, fuel pumps, valve covers, engine covers, billet cap covers, and full engine bay dress-up parts for HEMI, Hellcat, Trackhawk, Redeye, Demon, Scat Pack, RAM TRX, LS, LT, Coyote, EcoBoost, K-Series, and 2JZ builds. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 14,298 engine SKUs across performance, cooling, oil control, ignition, and appearance categories. What This Category Covers The Engine collection combines OEM-replacement engine service parts with performance aftermarket upgrades for supercharged, turbocharged, and naturally aspirated builds...
View Engine Products
Engine block parts and internals for HEMI, Hellcat, Trackhawk, TRX, LS, LT, Coyote, EcoBoost, K-Series, VR38DETT, and Cummins diesel builds are stocked at Black Ops Auto Works. Shop main and rod bearings, engine gaskets and gasket kits, engine mounts, block off plates, block heaters, PCV valves, sleeves, engine covers, and complete engines. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 2,187 engine block SKUs across rotating assembly, sealing, mounting, and engine bay dress-up categories. What This Category Covers The Engine Block collection groups the internal and structural components that make up the bottom end and block assembly of a performance or OEM-replacement engine. Coverage spans bearings for rotating assembly refreshes, gaskets and gasket kits for sealing rebuilds, engine mounts for swap and performance builds, and engine bay dress-up pieces for HEMI, Hellcat, and ...
View Engine Block Products
Engine Covers and Dress-Up Parts for Dodge Challenger, Charger, Durango, Jeep Grand Cherokee and Trackhawk, Ram, LS, Coyote, Ford Modular, Hemi, and classic domestic engine bay applications are stocked at Black Ops Auto Works. Shop billet engine covers, carbon fiber engine covers, valve cover dress-up, fuse box covers, oil cap covers, fluid caps, supercharger covers, and engine bay trim for proven street, drag, road course, and high horsepower engine builds. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 205 engine cover and dress-up SKUs across the fitments and build levels enthusiasts actually use. What Engine Covers and Dress-Up Parts Cover This collection includes billet and carbon fiber engine covers, oil and fluid cap covers, fuse box covers, hood prop covers, radiator covers, engine bay plates, and finishing details for modern performance cars, trucks, Jeeps, and classic...
View Engine Covers Products
Seibon carbon fiber parts for import sport compacts and sports cars are stocked at Black Ops Auto Works. Shop carbon fiber hoods, trunks, front lips, spoilers, fenders, doors, side skirts, and mirror caps for Toyota Supra and GR Corolla, Honda Civic and S2000, Acura Integra and NSX, Subaru WRX and BRZ, Nissan Z and GT-R, and Mitsubishi Evo platforms. Every product is filterable by year, make, model, trim, and body style so the correct part ships the first time. Black Ops Auto Works carries 815 Seibon SKUs across hoods, trunks, aero, and exterior styling categories. What This Collection Covers Seibon builds carbon fiber body panels for a wide range of import sport compacts and sports cars, and each hood, trunk, or lip is molded to the specific body lines of one platform. This collection groups Seibon parts by the exact vehicle they were designed for so Supra, Civic, WRX, 370Z, and Evo owners can shop their correct application. Platforms We Cover Seibon offers vehicle-specific car...
View Seibon Products
