View vehicle applications
Fitment notes and restrictions
Description
Reduce steering kickback on heavy-duty Ford front axles
Skyjacker 7058 is a Hydro 7000 original-equipment replacement steering stabilizer kit for the supported Ford Super Duty applications. The hydraulic damper helps control unwanted steering feedback without changing ride height or replacing unrelated suspension parts.
Key Features
- Skyjacker 7058 is matched to the supported Ford Super Duty steering linkage
- Hydro 7000 hydraulic damping
- Original-equipment replacement configuration
- Protective red boot included
- Mounting hardware shown with the exact kit
- Does not change suspension height
Fitment
| Years | Make | Models | Verified Notes |
|---|---|---|---|
| 2008-2025 | Ford | F-250 Super Duty; F-350 Super Duty | Use only where the factory steering linkage matches the manufacturer catalog application. |
Specifications
| Detail | Value |
|---|---|
| Manufacturer Part Number | 7058 |
| Series | Hydro 7000 |
| Product Type | Steering stabilizer kit |
| Position | Front steering linkage |
| Quantity | One stabilizer kit |
| UPC | 803696296104 |
What's Included
- One Skyjacker 7058 steering stabilizer
- Red protective boot
- Application-specific mounting hardware shown with the exact kit
About Skyjacker
Skyjacker develops lift and steering-control components for trucks and SUVs. Its steering stabilizers are selected by the exact linkage and axle application, so the vehicle and original mounting arrangement must be confirmed before installation.
Related Parts
- No internal product is linked because tie rods, drag links, brackets, and dual-stabilizer conversions require separate exact-application verification.
FAQ
What is the 7058?It is a Hydro 7000 steering stabilizer kit for the supported Ford Super Duty steering linkage.
Does it lift the truck?No. A steering stabilizer controls hydraulic damping and does not change ride height.
Is this a dual-stabilizer kit?No. The verified package contains one stabilizer in the original-equipment replacement configuration.
Is the red boot included?Yes. The exact kit image and listing include the protective boot.
Does it replace worn steering parts?No. Worn joints, bearings, linkage, or alignment problems must be repaired separately.
Will it fit every Super Duty?Fitment depends on the listed model years and the original linkage configuration. Compare the mounts before installation.
Is alignment required?Replacing the stabilizer alone does not set alignment, but steering and tire condition should be inspected after service.
What should be checked after installation?Verify torque, full steering travel, hose and boot clearance, and that no mounting point binds or contacts another component.
Installation Instructions
- Confirm the Ford model, model year, and original steering linkage before opening the Skyjacker 7058 package.
- Support the vehicle safely with the wheels straight and inspect the linkage and mounting points for wear or damage.
- Remove the original stabilizer and retain only the hardware specified by the current instructions.
- Install the new damper and supplied hardware in the documented orientation without preloading the steering.
- Torque all fasteners to the current Skyjacker or Ford service specification.
- Cycle the steering lock to lock, verify clearance, and recheck the hardware after the initial road test.
California Proposition 65 Warning: This product can expose you to chemicals including antimony oxide and other chemicals known to the State of California to cause cancer or reproductive harm. For more information, visit www.P65Warnings.ca.gov.
