Skyjacker 1979-1986 GMC K2500 Pickup Steering Damper Kit

Hydraulic Steering Damper Kit for 1979-1986 GMC and Chevrolet K-Series Half-Ton and Three-Quarter-Ton Trucks

The Skyjacker 8055 is a hydraulic steering damper kit engineered for 1979-1986 GMC and Chevrolet K-series trucks, including the K1500, K2500, K5 Blazer, and Jimmy. The square-body GM platform from this era is a beloved foundation for both restoration builds and trail rigs, and the 8055 addresses the shimmy and steering wander that develops on these trucks after suspension lifts, larger tires, or simply with age and wear. The 8055 bolts directly to OEM mount points for a clean, factory-style installation.

Key Features

• Designed for 1979-1986 GMC K1500, K2500, K5 Blazer, Jimmy, and equivalent Chevrolet K-series models
• Hydraulic damping construction reduces steering shimmy and front-end vibration
• Direct-fit design using OEM steering stabilizer mount positions
• All required hardware included for a complete installation
• Lifetime limited warranty for the original retail purchaser
• Prop 65 compliant with warning label included

Fitment

Specifications

What's Included

• 1 x Skyjacker 8055 hydraulic steering stabilizer
• All required mounting hardware
• Installation instructions

About Skyjacker

Skyjacker Suspensions has engineered lift kits, steering stabilizers, and suspension components from West Monroe, Louisiana since 1974. Every Skyjacker product is backed by a lifetime limited warranty for the original retail purchaser, making them a trusted upgrade partner for square-body and classic truck enthusiasts.

FAQ

The Skyjacker 8055 is a hydraulic steering damper kit designed for 1979-1986 GMC and Chevrolet K-series trucks including the K2500, K1500, K5 Blazer, and equivalent models. It reduces shimmy and steering wander by mounting directly to OEM locations on the front axle.

Yes. The 8055 is compatible with the 1979-1986 Chevrolet K10 and K20 (and K30) trucks built on the same square-body GM full-size platform as the GMC K1500, K2500, and K3500 models.

Yes. The 8055 is an appropriate upgrade for square-body GM trucks that have received suspension lifts and larger tires. The hydraulic damper absorbs the increased steering forces generated by larger tires and caster angle changes from a lift.

No. The 8055 uses the existing OEM steering stabilizer mounting points on the 1979-1986 GM front axle. All hardware is included and the installation requires only standard hand tools.

Skyjacker backs the 8055 with a lifetime limited warranty for the original retail purchaser covering defects in materials and workmanship, excluding competition use and commercial vehicle applications beyond one year.

Skyjacker still supports the square-body GM platform with purpose-built part numbers like the 8055. Aftermarket support for these classic trucks remains strong, and the 8055 is designed as an exact-fit replacement for these specific applications.

Yes. This product contains chemicals known to the State of California to cause cancer or reproductive harm. A Prop 65 warning label is included with the product.

The correct part number for a 1985 GMC K2500 steering stabilizer is Skyjacker 8055. Always verify the fitment year range and your vehicle's drivetrain configuration before purchasing.

Installation Instructions

1. Raise the front of the truck on jack stands with the steering centered.
2. Remove the existing steering stabilizer or any worn OEM hardware.
3. Install the 8055 at the same mount locations using the included hardware.
4. Torque all fasteners to the values specified in Skyjacker's instruction sheet.
5. Lower the truck and perform a full lock-to-lock steering check to confirm no binding.
6. Test drive and re-inspect all connections at 50 miles.

Proposition 65 Warning: This product can expose you to chemicals including lead and/or other compounds known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.