-12%
Sold out
Click to zoom in
Maximum Clearance Rock Ready Lift For Serious YJ Builds
The Skyjacker YJ60MK-B is a 6 inch Rock Ready Monolinear suspension lift kit built for 1987-1995 Jeep Wrangler YJ owners running power steering who want serious ground clearance and a nearly complete suspension overhaul in one package. The monolinear front leaf spring design improves articulation and ride comfort compared to older multi-leaf setups, while Black MAX shocks control body motion at speed and on the trail. Because a 6 inch lift significantly changes suspension geometry, Skyjacker includes front and rear shackle plates, a front track bar, bump stops, a sway bar end link, a brake line set, and a transfer case lowering kit, addressing nearly every system affected by the lift in a single kit. This comprehensive approach reduces the need to source additional parts separately and helps ensure the finished vehicle drives predictably at the new ride height.
Key Features
- 6 inch lift height for maximum tire clearance
- Monolinear front leaf spring design for improved articulation
- Includes front and rear shackle plates
- Front track bar included to correct axle centering
- Bump stops, sway bar end link, and brake line set included
- Transfer case lowering kit included to correct driveline angle
- Designed specifically for power steering equipped YJ models
Fitment Table
| Year Range | Make | Model |
|---|---|---|
| 1987-1995 | Jeep | Wrangler |
Specifications
| Detail | Value |
|---|---|
| MPN | YJ60MK-B |
| UPC | Not Published |
| Part Type | Suspension Lift Kit |
| Lift Height | 6 inches |
| Spring Design | Monolinear |
| Shock Type | Black MAX |
| Steering Configuration | Power Steering |
| Approximate Kit Weight | 128.7 lbs |
| Prop 65 | Yes |
What's Included
- Monolinear front leaf springs and rear leaf springs
- Front and rear shackle plates
- Front track bar
- Bump stops
- Sway bar end link
- Brake line set
- Transfer case lowering kit
- Black MAX shock absorbers
About Skyjacker
Skyjacker has manufactured suspension lift kits, shocks, and related components in Louisiana since 1970. The company is known for durable, American made suspension parts designed to hold up to demanding on road and off road use while maintaining factory like ride quality.
Related Parts
- Skyjacker Suspension Lift Kit Component 1987-1995 Jeep Wrangler (YJ)
FAQ
What is the YJ60MK-B?The YJ60MK-B is a Skyjacker 6 inch Rock Ready Monolinear suspension lift kit for 1987-1995 Jeep Wrangler YJ models with power steering, including nearly every component needed for a major lift.
Does the YJ60MK-B require power steering?Yes, the YJ60MK-B is designed specifically for YJ models equipped with power steering.
What is a monolinear leaf spring?A monolinear spring uses a tapered single or reduced leaf design that improves articulation and ride quality compared to traditional multi-leaf springs.
Why does the YJ60MK-B include a transfer case lowering kit?A 6 inch lift significantly changes driveshaft angle, so the included transfer case lowering kit helps reduce vibration and maintain proper driveline geometry.
Does the YJ60MK-B include shocks?Yes, the YJ60MK-B includes Black MAX shock absorbers designed to control body motion at the increased ride height.
What tire size can I run with the YJ60MK-B?A 6 inch lift generally supports significantly larger tires than a stock YJ, though exact clearance depends on wheel width, offset, and fender modifications.
Does the YJ60MK-B include a track bar?Yes, a front track bar is included to keep the front axle properly centered under the vehicle at the new ride height.
Is professional installation recommended for the YJ60MK-B?Given the scope of a 6 inch lift kit, professional installation is recommended unless you have experience with major suspension and driveline work.
Install Instructions
- Raise the vehicle and support it securely on jack stands, then remove all four wheels.
- Support the front and rear axles with a floor jack and disconnect the shocks, track bar, sway bar links, and brake lines.
- Remove the factory leaf springs, shackles, and U-bolts at each axle location.
- Install the new monolinear leaf springs, shackle plates, and U-bolts, torquing to manufacturer specification.
- Install the front track bar, sway bar end link, and new brake line set.
- Install the transfer case lowering kit following the included instructions to correct driveshaft angle.
- Install the Black MAX shocks and bump stops at all four corners.
- Lower the vehicle, check ride height and driveline angles, and have the vehicle professionally aligned before extended driving.
Prop 65 Warning
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.
Shocks and Struts
Shocks and struts for cars, trucks, SUVs, and Jeeps are stocked at Black Ops Auto Works. Shop front and rear shocks, loaded strut assemblies, monotube shocks, twin-tube shocks, reservoir shocks, and steering dampers for daily drivers, lifted trucks, tow rigs, off-road builds, and muscle cars on Hellcat, Trackhawk, TRX, HEMI, LS, LT, Coyote, and EcoBoost platforms. Every shock and strut is filterable by year, make, model, trim, drivetrain, front or rear position, and ride height so the correct part ships the first time. Black Ops Auto Works carries 5,188 shock and strut SKUs across construction type, application, and vehicle use. What This Category Covers Shocks and struts damp spring oscillation so the tire stays planted on the road and are the most common suspension replacement job on any vehicle. A shock absorber is a standalone damping unit that bolts between the chassis and axle or lower control arm. A strut is a structural suspension member that combines damping with the sp...
View Shocks and Struts Products
Skyjacker
Skyjacker suspension parts are stocked at Black Ops Auto Works for Jeep, Ford, Chevrolet, GMC, RAM, and Toyota trucks and 4x4 vehicles. Shop lift kits, leveling kits, dual rate coil springs, Black Max, Nitro 8000, Hydro 7000, and ADX M2.0 shocks, steering stabilizers, upper control arms, and suspension hardware. Every product is filterable by year, make, model, trim, and drivetrain so the correct Skyjacker part ships the first time. Black Ops Auto Works carries 1,596 Skyjacker SKUs across lift, leveling, and off-road suspension categories. What This Collection Covers Skyjacker builds off-road suspension systems for trucks and Jeeps that need more ground clearance, better ride control, improved steering stability, and stronger trail capability. Skyjacker is best known for lift kits, leveling kits, and long travel coil springs. Product Categories Lift kits and component boxes, leveling kits and strut spacers, dual rate and long travel coil springs, Black Max, Nitro 8000, Hydro 700...
View Skyjacker Products
Suspension
Suspension parts and complete kits for cars, trucks, SUVs, Jeeps, and off-road builds are stocked at Black Ops Auto Works. Shop coilovers, lowering springs, lift kits, leveling kits, shocks and struts, sway bars, control arms, tie rods, ball joints, bushings, chassis bracing, alignment hardware, air suspension, and complete stage kits from Bilstein, KW, Ohlins, Fox, KING, ICON, BC Racing, Silvers, Eibach, H&R, Swift Springs, Whiteline, Energy Suspension, Moog, SPC Performance, Rough Country, ReadyLIFT, BDS, Skyjacker, Air Lift, Firestone, and Black Ops Auto Works. Start with a matched shock and spring package or a full coilover kit, then layer in sway bars, chassis bracing, and camber adjustment hardware. Every part is filterable by year, make, model, trim, and drivetrain to confirm fitment before ordering. What This Category Covers Suspension is the highest-leverage handling upgrade on any vehicle. A properly matched shock, spring, and sway bar package produces measurable i...
View Suspension Products