Skyjacker 8"SR 73-87 GM 1/2 W/REAR SP

Maximum Ground Clearance for Your GM 1/2-Ton Truck

The Skyjacker C180AKS-H Softride suspension system delivers a full 8 inch lift for full size Chevrolet and GMC 1/2-ton trucks and SUVs built between 1973 and 1987. This kit pairs Skyjacker Softride front and rear leaf springs with M95 Performance Monotube shocks and includes rear lift blocks, brake line brackets, and all mounting hardware needed to complete the installation. Powder coated black components resist corrosion in salt, mud, and snow, and the tapered leaf design keeps the ride controlled at full lift height.

Key Features

• 8 inch lift height front and rear
• Skyjacker Softride front and rear leaf springs with progressive multi-leaf design
• M95 Performance Monotube shocks included front and rear
• Rear lift blocks and brake line brackets included
• Powder coated black hardware resists corrosion
• Limited Lifetime Warranty backed by Skyjacker

Fitment

Specifications

What's Included

• Front and rear Skyjacker Softride leaf springs
• Front and rear M95 Performance Monotube shocks
• Rear lift blocks and brake line brackets
• Bushing kit and U-bolts
• Installation hardware and instructions

About Skyjacker

Skyjacker Suspensions has engineered lift kits, shocks, and leaf springs from its West Monroe, Louisiana facility since 1970. The C180AKS-H carries forward Skyjacker's Softride leaf spring technology, which tapers each leaf along its length to spread load evenly, giving GM 1/2-ton truck and SUV owners a smoother ride at full lift height.

Related Parts

• Skyjacker 6"SYS 73-87 1/2T Suburban (SKYC160AKSS-H)
• Skyjacker 6"SYS 73-87 1/2T Suburban (SKYC160AKSS-M)
• Skyjacker 8"SR 73-87 GM 1/2 W/Rear SP (SKYC180AKS)

FAQ

The C180AKS-H is a Skyjacker Softride suspension lift system that raises 1973-1987 GM 1/2-ton trucks and SUVs a full 8 inches front and rear using Softride leaf springs and M95 Performance Monotube shocks.

Yes, the kit includes front and rear M95 Performance Monotube shocks matched to the 8 inch lift height.

Most applications support up to a 37 inch by 12.5 inch tire with the correct wheel backspacing.

Softride leaf springs are tapered to distribute load evenly, so on-road ride quality remains comfortable even at 8 inches of lift.

A drop pitman arm is recommended on most of these applications to correct steering geometry after the lift is installed.

No, the kit bolts on using factory mounting locations and does not require cutting or welding.

Skyjacker backs the C180AKS-H with a Limited Lifetime Warranty against manufacturing defects.

Yes, with common hand tools, a floor jack, and jack stands, the C180AKS-H can be installed in a home garage in a weekend.

Install Instructions

1. Park the vehicle on level ground, set the parking brake, and block the tires.
2. Raise the vehicle and support the frame on jack stands.
3. Remove the wheels, shocks, and factory leaf springs front and rear.
4. Install the new Skyjacker Softride front leaf springs with the supplied U-bolts and bushings.
5. Install the rear Softride leaf springs and rear lift blocks with new U-bolts.
6. Mount the new M95 Performance Monotube shocks front and rear and torque to specification.
7. Reconnect brake lines using the supplied brackets and reinstall the wheels.
8. Lower the vehicle, check alignment, torque all hardware to spec, and recheck after the first 100 miles.

Prop 65 Warning

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.