-12%
Click to zoom in
Trail Ready Damping Engineered For The Ram 1500
Skyjacker built the M2091 ADX M2.0 Adventure Series Aluminum Monotube Shock to bring race inspired damping control to daily driven and trail driven rigs alike. This front position shock uses an impact extruded, CNC machined aluminum monotube body that sheds heat far quicker than a conventional steel shock, keeping the valving consistent even after a long stretch of rough road or a hard day on the trail. Inside, a full displaced valving system pulled from off road racing technology paired with high pressure nitrogen gas and an internal floating piston keeps it reacting quickly and predictably no matter how demanding the terrain gets. Owners of the 1994-2005 Ram 1500 looking to upgrade worn out factory dampers or finish out a Skyjacker lift will find this shock restores composed, controlled handling while improving overall ride comfort.
Key Features
- Impact extruded CNC machined T6061-T6 aluminum monotube body
- Full displaced valve system inspired by off road racing
- High pressure nitrogen gas with Internal Floating Piston (IFP) technology
- Large 2.11 in. (53.5mm) OD aluminum body with 1.81 in. (46mm) ID bore
- Teflon banded piston for smooth, consistent reaction
- Clear anodized polished aluminum finish resists corrosion
- Direct fit front replacement for the 1994-2005 Ram 1500
- Backed by a 2 year limited warranty from Skyjacker
Fitment
| Year Range | Make | Model |
|---|---|---|
| 1994-2005 | Ram | 1500 |
Specifications
| Detail | Value |
|---|---|
| UPC | Not Published |
| Body Material | Aluminum |
| Body Diameter | 2.11 in. (53.5mm OD) |
| Bore Size | 1.81 in. (46mm ID) |
| Extended Length | 22.60 in. |
| Collapsed Length | 14.80 in. |
| Shock Stroke | Not Published |
| Position | Front |
| Warranty | 2 Year Limited Warranty |
What's Included
- One ADX M2.0 Adventure Series Aluminum Monotube Shock, Front (M2091)
- Mounting hardware sleeves and bushings where applicable
- Shock boot and installation cable tie
About Skyjacker
Skyjacker has spent decades engineering suspension systems and components for trucks, Jeeps and SUVs, building a reputation for durable, purpose engineered products that hold up to real world off road use. The ADX M2.0 Adventure Series continues that tradition, applying race proven valving and aluminum construction to everyday trail and street driven vehicles.
FAQ
What is the M2091?The M2091 is a Skyjacker ADX M2.0 Adventure Series Aluminum Monotube Shock designed for the front position on the 1994-2005 Ram 1500.
Is this a direct fit for my Ram 1500?Yes, it is engineered as a direct fit front shock for the 1994-2005 Ram 1500 listed in the fitment table above with no cutting or drilling required.
Does it include a remote reservoir?No, this is a monotube design without a remote reservoir, which keeps the packaging compact while still using the same nitrogen gas and IFP technology found in Skyjacker's reservoir equipped shocks.
Can I install it on a stock, non lifted vehicle?This shock is valved for the specific application and lift range noted by Skyjacker for the 1994-2005 Ram 1500, so confirm your ride height and lift kit specifications before ordering.
Do I need to replace shocks in pairs?Skyjacker recommends replacing shocks as a front pair or rear pair together so damping stays balanced side to side on the Ram 1500.
What warranty comes with the M2091?It carries a 2 year limited warranty from Skyjacker against defects in material and workmanship.
Will it fade or lose performance on long trail runs?The aluminum monotube body dissipates heat quickly, and the nitrogen charged IFP design helps resist fade during extended off road driving.
Is professional installation required?Installation of the M2091 is a bolt on remove and replace procedure that most experienced DIY installers can complete with common hand tools, though professional installation is always recommended if you are unfamiliar with suspension work.
Install Instructions
- Park the Ram 1500 on level ground, set the parking brake, and chock the wheels opposite the end being serviced.
- Raise and support the vehicle with jack stands at the manufacturer specified lift points.
- Remove the wheel and tire assembly on the side being serviced.
- Support the axle or control arm with a jack to relieve tension on the factory shock.
- Remove the factory front shock at the upper and lower mounts.
- Install the new M2091 shock at the upper mount first, then connect the lower mount using factory hardware, leaving fasteners snug but not fully torqued.
- Reinstall the wheel and tire, then lower the vehicle to the ground.
- With full vehicle weight on the tires, torque the upper and lower shock mounts to the manufacturer's specification.
- Cycle the suspension and steering lock to lock to confirm clearance, then road test.
Prop 65 Warning
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Shocks and Struts
Shocks and struts for cars, trucks, SUVs, and Jeeps are stocked at Black Ops Auto Works. Shop front and rear shocks, loaded strut assemblies, monotube shocks, twin-tube shocks, reservoir shocks, and steering dampers for daily drivers, lifted trucks, tow rigs, off-road builds, and muscle cars on Hellcat, Trackhawk, TRX, HEMI, LS, LT, Coyote, and EcoBoost platforms. Every shock and strut is filterable by year, make, model, trim, drivetrain, front or rear position, and ride height so the correct part ships the first time. Black Ops Auto Works carries 5,188 shock and strut SKUs across construction type, application, and vehicle use. What This Category Covers Shocks and struts damp spring oscillation so the tire stays planted on the road and are the most common suspension replacement job on any vehicle. A shock absorber is a standalone damping unit that bolts between the chassis and axle or lower control arm. A strut is a structural suspension member that combines damping with the sp...
View Shocks and Struts Products
Skyjacker
Skyjacker suspension parts are stocked at Black Ops Auto Works for Jeep, Ford, Chevrolet, GMC, RAM, and Toyota trucks and 4x4 vehicles. Shop lift kits, leveling kits, dual rate coil springs, Black Max, Nitro 8000, Hydro 7000, and ADX M2.0 shocks, steering stabilizers, upper control arms, and suspension hardware. Every product is filterable by year, make, model, trim, and drivetrain so the correct Skyjacker part ships the first time. Black Ops Auto Works carries 1,596 Skyjacker SKUs across lift, leveling, and off-road suspension categories. What This Collection Covers Skyjacker builds off-road suspension systems for trucks and Jeeps that need more ground clearance, better ride control, improved steering stability, and stronger trail capability. Skyjacker is best known for lift kits, leveling kits, and long travel coil springs. Product Categories Lift kits and component boxes, leveling kits and strut spacers, dual rate and long travel coil springs, Black Max, Nitro 8000, Hydro 700...
View Skyjacker Products
Suspension
Suspension parts and complete kits for cars, trucks, SUVs, Jeeps, and off-road builds are stocked at Black Ops Auto Works. Shop coilovers, lowering springs, lift kits, leveling kits, shocks and struts, sway bars, control arms, tie rods, ball joints, bushings, chassis bracing, alignment hardware, air suspension, and complete stage kits from Bilstein, KW, Ohlins, Fox, KING, ICON, BC Racing, Silvers, Eibach, H&R, Swift Springs, Whiteline, Energy Suspension, Moog, SPC Performance, Rough Country, ReadyLIFT, BDS, Skyjacker, Air Lift, Firestone, and Black Ops Auto Works. Start with a matched shock and spring package or a full coilover kit, then layer in sway bars, chassis bracing, and camber adjustment hardware. Every part is filterable by year, make, model, trim, and drivetrain to confirm fitment before ordering. What This Category Covers Suspension is the highest-leverage handling upgrade on any vehicle. A properly matched shock, spring, and sway bar package produces measurable i...
View Suspension Products