-12%
Click to zoom in
Adjustable Front Coilover Control for Lifted Gladiator Trucks
The Skyjacker G36FLS front coilover shock set is built for 2020-2025 Jeep Gladiator JT trucks running a 3.5 to 6 inch lift. The G36FLS uses a coilover design that lets an installer adjust ride height independent of the shock valving, giving fine control over stance while keeping factory quality damping characteristics. This front coilover shock kit is engineered to work with a compatible Skyjacker long arm or short arm lift system on the Gladiator platform.
Each G36FLS shock is monotube in design, resisting fade under repeated off road compression cycles better than twin tube shocks. The coilover spring perches are adjustable, so the G36FLS can be tuned to the specific lift height and load requirements of a given Gladiator build. Owners running heavier front end accessories such as winches or aftermarket bumpers benefit from the ability to fine tune preload with the G36FLS coilover collars.
Key Features
- Front coilover shock set for 3.5 to 6 inch Gladiator lifts
- Monotube shock design resists fade on the trail
- Adjustable coilover collars for ride height tuning
- Engineered specifically for Gladiator JT front suspension geometry
- Pairs with Skyjacker long arm and short arm lift systems
- Consistent damping across full suspension travel
Fitment
| Year Range | Make | Model | Trim |
|---|---|---|---|
| 2020-2025 | Jeep | Gladiator | Sport |
| 2020-2025 | Jeep | Gladiator | Rubicon |
| 2020-2025 | Jeep | Gladiator | Mojave |
| 2020-2025 | Jeep | Gladiator | Overland |
Specifications
| Detail | Value |
|---|---|
| MPN | G36FLS |
| UPC | Not Published |
| Shock Type | Monotube coilover |
| Position | Front, pair |
| Lift Range | 3.5 to 6 inch |
| Adjustability | Adjustable coilover collars |
What's Included
- Front coilover shocks, pair
- Coilover springs
- Adjustable spring collars
- Mounting hardware
About Skyjacker
Skyjacker has engineered suspension lift systems and shocks since 1970, focused on durability and precise fitment for trucks, Jeeps, and SUVs. The G36FLS reflects that engineering approach, giving Gladiator owners a coilover shock built to match the demands of a lifted long arm suspension.
Related Parts
- Skyjacker Gladiator Front Rear Control Arm Component Box
- Skyjacker Gladiator Rear Shock Absorber
FAQ
What is the G36FLS?The G36FLS is a Skyjacker front coilover shock set designed for 2020-2025 Jeep Gladiator JT trucks running a 3.5 to 6 inch lift.
What lift height does the G36FLS support?The G36FLS is designed for Gladiator applications lifted between 3.5 and 6 inches.
Can I adjust ride height with the G36FLS?Yes, the G36FLS coilover collars allow ride height adjustment independent of shock valving.
Is the G36FLS a monotube or twin tube shock?The G36FLS uses a monotube design, which resists fade better than twin tube shocks during extended off road use.
Does the G36FLS fit all Gladiator trims?Yes, the G36FLS fits Sport, Rubicon, Mojave, and Overland Gladiator trims from 2020 through 2025.
Do I need control arms with the G36FLS?Adjustable control arms are recommended alongside the G36FLS to maintain proper alignment geometry after lifting.
Is professional installation recommended for the G36FLS?Professional installation is recommended for the G36FLS to ensure correct preload and torque specifications.
What position does the G36FLS mount to?The G36FLS mounts to the front suspension of the Gladiator as a pair.
Install Instructions
- Raise and support the front of the Gladiator on jack stands.
- Remove factory front shocks from upper and lower mounts.
- Install the G36FLS coilover shocks at the factory mounting points.
- Adjust the coilover collars to the desired ride height.
- Torque all mounting hardware to specification.
- Lower the vehicle and cycle suspension to check clearance.
- Have a qualified shop perform an alignment after installation.
Prop 65 Warning
This product can expose you to chemicals including chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.
Lift Kits
Shop lift kits, suspension lift kits, coilover lift kits, Pro-Truck lift kits, Stage 1, Stage 2, and Stage 2R lift systems, leveling kits, front strut spacer kits, rear lift blocks, coil spring lift kits, component boxes, upper control arms, lift springs, and reservoir shocks from Eibach, Skyjacker, Zone Offroad, Tuff Country, Belltech, MaxTrac, Fabtech, Rancho, and other truck and off-road suspension manufacturers. Find complete suspension lift packages, front-only strut leveling kits, rear-only block and shackle kits, Jeep and Gladiator component boxes with ADX M2.0 aluminum monotube shocks, Rancho QuickLift loaded struts, and lift hardware sized for daily-driven trucks, weekend adventure builds, and dedicated overland platforms. A properly matched lift kit raises ride height, opens up tire and wheel clearance, corrects factory rake on trucks and SUVs, and adds the ground clearance needed for larger tires and off-road use. This collection covers everything from 1.5-inch front s...
View Lift Kits Products
Skyjacker
Skyjacker suspension parts are stocked at Black Ops Auto Works for Jeep, Ford, Chevrolet, GMC, RAM, and Toyota trucks and 4x4 vehicles. Shop lift kits, leveling kits, dual rate coil springs, Black Max, Nitro 8000, Hydro 7000, and ADX M2.0 shocks, steering stabilizers, upper control arms, and suspension hardware. Every product is filterable by year, make, model, trim, and drivetrain so the correct Skyjacker part ships the first time. Black Ops Auto Works carries 1,596 Skyjacker SKUs across lift, leveling, and off-road suspension categories. What This Collection Covers Skyjacker builds off-road suspension systems for trucks and Jeeps that need more ground clearance, better ride control, improved steering stability, and stronger trail capability. Skyjacker is best known for lift kits, leveling kits, and long travel coil springs. Product Categories Lift kits and component boxes, leveling kits and strut spacers, dual rate and long travel coil springs, Black Max, Nitro 8000, Hydro 700...
View Skyjacker Products
Suspension
Suspension parts and complete kits for cars, trucks, SUVs, Jeeps, and off-road builds are stocked at Black Ops Auto Works. Shop coilovers, lowering springs, lift kits, leveling kits, shocks and struts, sway bars, control arms, tie rods, ball joints, bushings, chassis bracing, alignment hardware, air suspension, and complete stage kits from Bilstein, KW, Ohlins, Fox, KING, ICON, BC Racing, Silvers, Eibach, H&R, Swift Springs, Whiteline, Energy Suspension, Moog, SPC Performance, Rough Country, ReadyLIFT, BDS, Skyjacker, Air Lift, Firestone, and Black Ops Auto Works. Start with a matched shock and spring package or a full coilover kit, then layer in sway bars, chassis bracing, and camber adjustment hardware. Every part is filterable by year, make, model, trim, and drivetrain to confirm fitment before ordering. What This Category Covers Suspension is the highest-leverage handling upgrade on any vehicle. A properly matched shock, spring, and sway bar package produces measurable i...
View Suspension Products