-35%
Click to zoom in
Dial In Exact Boost Pressure Without Guesswork
Nitrous, boost reference, and forced induction systems all depend on a stable, adjustable gas supply, and the Snow Performance SNO-354 Dual Outlet Adjustable CO2 Regulator delivers exactly that. Built from billet aluminum with a black anodized finish, this regulator lets you dial output pressure anywhere from 0 to 475 PSI through a single adjustment knob, feeding two independent outlets from one CO2 or nitrogen source. Whether you are running a staged nitrous system, a boost controller reference line, or a pneumatic actuator setup, the SNO-354 gives you precise, repeatable control at the source.
Key Features
- Dual outlet design feeds two separate systems from a single CO2 or inert gas cylinder
- Fully adjustable output pressure range from 0 to 475 PSI
- CNC machined billet aluminum body with black anodized finish for corrosion resistance
- Compatible with CO2, nitrogen, compressed air, and nitrous oxide supply lines
- Inlet and high/low pressure gauge ports for real time monitoring
- 1/8 NPT outlet fittings for common hose and fitting compatibility
- Compact footprint for easy mounting in the engine bay or trunk
Specifications
| Detail | Value |
|---|---|
| Brand | Snow Performance |
| Part Number | SNO-354 |
| Regulator Type | Dual Outlet, Adjustable |
| Adjustable Pressure Range | 0 to 475 PSI |
| Outlet Thread | 1/8 NPT |
| Body Material | Billet Aluminum, Black Anodized |
| Compatible Media | CO2, Nitrogen, Compressed Air, Nitrous Oxide |
| UPC | Contact Black Ops Auto Works for current UPC |
What's Included
- (1) SNO-354 Dual Outlet Adjustable CO2 Regulator
- Mounting hardware
About Snow Performance
Snow Performance has spent decades developing water methanol injection, boost control, and nitrous support products for street and race applications. Based in Woodland Park, Colorado, the company is known for precision machined components that hold up to sustained high pressure use, and the SNO series of regulators reflects that same engineering standard applied to gas pressure control.
Related Parts on Our Site
FAQ
What is the SNO-354?The SNO-354 is a dual outlet adjustable CO2 regulator from Snow Performance, capable of supplying two separate systems with independently stable pressure from 0 to 475 PSI using a single billet aluminum body.
What pressure range does the SNO-354 support?The regulator is adjustable across a 0 to 475 PSI range, allowing fine tuning for nitrous, boost reference, or pneumatic actuator applications.
Can the SNO-354 run two separate nitrous systems at once?Yes, the dual outlet design allows two independent lines to draw from the same regulator body, each able to be plumbed to a different system or stage.
What gases can I run through this regulator?The SNO-354 is rated for CO2, nitrogen, compressed air, and nitrous oxide, making it flexible for a wide range of performance applications.
What thread size are the outlet ports?Both outlets use 1/8 NPT threads, which are compatible with common nitrous and pneumatic fittings.
Does the SNO-354 include pressure gauges?The regulator includes gauge ports for monitoring inlet and outlet pressure, though gauges themselves are typically sold separately unless noted in the listing.
How is the SNO-354 constructed?It is CNC machined from billet aluminum and finished in black anodizing for durability and resistance to corrosion in engine bay or trunk mounted locations.
Where should I mount the CO2 regulator?Most installers mount the regulator near the CO2 or nitrogen bottle, in the trunk or engine bay, with short, direct runs to each outlet system to minimize pressure drop.
Install Instructions
- Select a secure, accessible mounting location near the CO2 or nitrogen supply bottle.
- Mount the regulator using the supplied hardware, ensuring the body is stable and vibration is minimized.
- Connect the high pressure inlet line from the CO2 or nitrogen bottle to the regulator inlet port.
- Connect each of the two 1/8 NPT outlet ports to the respective downstream system lines using appropriate fittings and thread sealant.
- With the system depressurized, slowly open the source bottle valve and check all connections for leaks.
- Adjust the regulator knob to the desired output pressure while monitoring the gauge, then lock the setting in place.
- Verify both outlet circuits are receiving stable pressure before returning the vehicle to service.
Prop 65 Warning
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Forced Induction
Forced induction systems encompass every method of pushing air into an engine at greater than atmospheric pressure, including turbochargers driven by exhaust energy, superchargers driven mechanically by the crankshaft, and prochargers using centrifugal designs belt-driven at higher ratios than traditional roots-type blowers, with each approach delivering a significant increase in air mass per cylinder fill that allows proportionally more fuel to be burned and more power to be produced without increasing engine displacement. Adding 10 PSI of boost pressure to a naturally aspirated engine can increase power output by 50 to 70 percent depending on the engine's breathing efficiency and the quality of the supporting hardware, making forced induction the most power-dense modification available relative to cost and complexity. This collection covers complete forced induction systems, turbocharger and supercharger hardware, intercoolers, blow-off valves, wastegates, and supporting component...
View Forced Induction Products
Nitrous Components
Welcome to our Nitrous Components collection, your ultimate destination for high-performance nitrous systems and accessories. Whether you're a professional racer or a car enthusiast, our curated selection is designed to elevate your vehicle's performance to the next level. Why Choose Our Nitrous Components? Quality Assurance: We source our products from trusted manufacturers to ensure durability and reliability. Performance Boost: Unlock your vehicle's potential with components that deliver significant horsepower gains. Wide Variety: From nitrous kits to accessories, we have everything you need for a complete setup. Expert Support: Our team is here to help you choose the right components for your specific needs. Featured Nitrous Components Explore some of our top-rated products: Nitrous Oxide Kits: Complete kits for easy installation and maximum performance. Fuel Solenoids: High-quality solenoids for precise fuel delivery. Distribution Blocks: Essential for managing mult...
View Nitrous Components Products
Nitrous Controllers
Welcome to our Nitrous Controllers collection, where performance meets precision! Whether you're a seasoned racer or a weekend enthusiast, our carefully curated selection of nitrous controllers will help you unlock the full potential of your engine. Why Choose Our Nitrous Controllers? Enhanced Performance: Experience significant boosts in horsepower with our top-quality nitrous controllers. Precision Control: Enjoy precise adjustments for optimal performance, ensuring your engine runs at its best. Easy Installation: Designed for user-friendly installation, our controllers fit seamlessly into your existing setup. Durability: Built with high-quality materials to withstand the rigors of high-performance driving. Versatile Options: Choose from a variety of models to suit your specific needs and vehicle types. Featured Products Explore some of our top-selling nitrous controllers: Nitrous Express Nitrous Controller: A reliable choice for optimal nitrous management. Holley Nitr...
View Nitrous Controllers Products
Snow Performance
Welcome to the Snow Performance collection, featuring cutting-edge products designed to enhance your vehicle's performance through innovative water injection technology. Water Injection: Easy Installation - Huge Improvements The Boost Cooler Water Injection kit enables active cooling of the combustion process, allowing for increased boost pressure and ignition timing without exposing the engine to higher thermal loads. Key benefits include: Compensation of power losses at higher ambient temperatures Reduction in specific fuel consumption Lower exhaust gas temperatures (EGT) Optimal Cooling with Boost Cooler The Boost Cooler injection system operates through three main processes: Water droplets absorb heat from the intake air before reaching the cylinder head, effectively cooling it. The evaporation of water droplets further cools the intake air charge—by up to 60°C and more! Steam produced in the combustion chamber acts as an anti-detonant, preventing carbon build-up and excess...
View Snow Performance Products