View vehicle applications
Fitment notes and restrictions
Description
Move the G8 V8 to a larger 3-inch axle-back layout
Solo Performance 994189-SL solo Performance () G8 V8 3-inch Axle-Back combines 3-inch mandrel-bent T409 stainless steel rear pipes with adjustable J-pipes and polished dual 3.5-inch tips. It bolts to the stock Pontiac muffler-flange connections, so it is a rear-section upgrade rather than a complete cat-back. The larger tips require a GXP rear valence
Key Features
- Solo Performance 994189-SL 3-inch mandrel-bent T409 stainless steel axle-back pipes
- Stock muffler-flange connection, engineered to integrate with the original exhaust
- Adjustable rear J-pipes for cabin-resonance control
- Dual 3.5-inch T304 polished stainless steel tips, staggered with an inner bevel
- Heavy-duty reinforced hangers
- Bolt-on assembly with gaskets and necessary hardware
- GXP rear valence required for this tip configuration
Application details and restrictions
| Years | Make | Model / Trim | Engine | Transmission |
|---|---|---|---|---|
| 2008–2009 | Pontiac | G8 GT | V8 | Automatic |
| 2009 | Pontiac | G8 GXP | V8 | Manual or automatic |
Specifications
| Detail | Value |
|---|---|
| Manufacturer Part Number | 994189-SL |
| Brand | Solo Performance |
| System | Dual 3-inch axle-back |
| Pipe material / forming | T409 stainless steel, mandrel bent |
| Connection | Stock Pontiac muffler flanges |
| Sound control | Adjustable J-pipes |
| Tips | Dual 3.5-inch T304 polished stainless steel, staggered with inner bevel |
| Rear valence | GXP valence required |
What's Included
- Solo Performance 994189-SL 3-inch axle-back pipes, dual 3.5-inch exhaust tips, adjustable J-pipes, gaskets and necessary hardware. The required GXP rear valence is not listed as included. This package does not supply a complete cat-back front or mid-section
About Solo Performance
Solo’s larger G8 axle-back retains the stock connection layout while pairing 3-inch rear pipes with larger polished tips. J-pipes provide resonance control without requiring the buyer to replace the entire cat-back assembly
Related Parts
- Compare only active Solo Performance systems verified for the same engine, body configuration, pipe diameter, tip layout, and required rear valence.
FAQ
What is the 994189-SL?It is the Solo Performance v8 3 inch axle back for the exact vehicle applications and restrictions shown above.
Do I need a GXP rear valence?Yes. Solo expressly requires the GXP valence for the larger dual 3.5-inch tips. Confirm it is fitted or arrange it separately before installation
Does a 3-inch axle-back require a full 3-inch cat-back?No such requirement is stated for this kit. Solo says it is engineered to connect to the stock Pontiac exhaust at the muffler flanges. Verify that those stock connections remain on your car
Is the piping T304 stainless steel?No. Solo specifies T409 for the 3-inch mandrel-bent pipes. T304 is specified for the polished exhaust tips
What is the difference from 994188SL?This listing specifies 3-inch axle-back pipes and dual 3.5-inch tips requiring the GXP valence. The separate 994188SL listing uses dual 3-inch tips. Choose by the complete specification and rear-opening requirements, not price alone
Are gaskets and fitting hardware included?Yes. Solo lists gaskets and necessary hardware with the pipes, tips and adjustable J-pipes
Will the J-pipes make every operating mode sound the same?No. They are intended to address cabin resonance. Solo still describes a low, guttural tone when an equipped GT operates in four-cylinder mode
Does it replace the catalytic converters?No. This is an axle-back system connected at the rear muffler flanges. Replacement converters and front exhaust components are not included
Installation Instructions
- Confirm Solo Performance 994189-SL, the listed vehicle application, and every stated requirement before removing the original exhaust.
- Check the supplied components and hardware against the manufacturer’s instructions before disassembly
- Trial-fit the sections and leave connections loose until the hangers and exhaust-tip positions are aligned
- Check body, suspension and rear-opening clearance, then tighten to the manufacturer’s applicable specifications
- Check for leaks or contact and recheck the hardware after the first heat cycle as directed




