View vehicle applications
Fitment notes and restrictions
Description
Solo Cyclone cat-back with quad round tips for the Challenger SXT
Solo Performance 991141SL is a stainless-steel cat-back for the 2015–2017 Dodge Challenger SXT 3.6L V6. The Cyclone muffler and polished quad round tips make this a different choice from Solo’s mufflerless Street Race or quad square setups. Expect a louder, deeper note than the stock exhaust.
Key Features
- Stainless-steel dual cat-back with Solo’s free-flow Cyclone muffler.
- Capped side-branch J-pipes designed to address cabin resonance.
- Polished quad round tips, with two round outlets per side.
- Manufacturer describes a bolt-on installation from the existing converter connection back.
Application details and restrictions
| Years | Make | Model | Submodel | Configuration |
|---|---|---|---|---|
| 2015–2017 | Dodge | Challenger | SXT | 3.6L V6, rear-wheel drive |
Not listed here for AWD, GT or V8 models. Confirm the factory exhaust connection and rear valance before ordering, especially if the vehicle has been modified. Check applicable exhaust and noise requirements.
Specifications
| Detail | Value |
|---|---|
| Brand | Solo Performance |
| Part Number | 991141SL |
| System | Cyclone dual cat-back |
| Material | Stainless steel |
| Muffler | Solo Cyclone |
| Tips | Polished quad round |
What's Included
Cyclone muffler and connecting exhaust sections, rear J-pipe assemblies and two dual-outlet round tips as shown. No catalytic converters are included. Confirm exact loose gasket and hardware contents before starting the job.
About Solo Performance
Solo Performance makes vehicle-specific exhaust systems with different muffler and outlet layouts. The Cyclone is a distinct muffled design, not the straight-through Street Race system.
Related Parts
Compare Solo Performance exhausts. If you need a different tip shape or prefer a more subdued note, verify the other kit’s part number, valve or tip clearance and fitment rather than ordering by appearance.
Frequently Asked Questions
What does 991141SL fit?
This listing covers the 2015–2017 Dodge Challenger SXT with the 3.6L V6 and rear-wheel drive.
Is this the square-tip Cyclone?
No. 991141SL has two pairs of polished round outlets. The square-tip Cyclone uses a different part number.
Does it have a muffler?
Yes. This uses the Cyclone muffler. Solo’s Street Race is a separate design without the conventional muffler supplied here.
Will it sound like the stock exhaust?
No. Solo describes the Cyclone as deep and aggressive. The actual sound depends on the vehicle, other exhaust changes and driving conditions.
Do the J-pipes vent under the car?
No. Solo describes them as capped branches intended to address specific resonant frequencies, not additional outlets.
Are new catalytic converters included?
No. The kit begins behind the existing converter connection.
Can I use it with an aftermarket exhaust connection?
Check flange design, tube size and clearance before ordering. An aftermarket converter or upstream exhaust may not share the stock connection.
How do I keep the quad tips evenly spaced?
Set the outlet position and depth with the joints still loose. Check clearance to both sides of the valance before tightening.
Installation Instructions
- Verify the vehicle and part number. Obtain Solo’s current instructions and confirm the contents before disassembling the factory system.
- Allow the exhaust to cool, support the car at its designated lift points and support the old exhaust before removing it.
- Connect the cat-back to the existing converter outlets using the appropriate kit instructions. Loosely position the muffler, rear sections and tips.
- Align the four outlets and check clearance around the valance, bodywork and heat shields. Tighten as specified by the manufacturer.
- Check for leaks and contact. Recheck alignment and hardware after the initial heat cycle once the system is cool. Professional installation is recommended.




