SPC Performance ADJ 1.5 deg. BJOINT-LEXUS

Ball joints restore controlled suspension movement and steering geometry on trucks, SUVs, muscle cars, Jeeps, and daily drivers. Shop OE-replacement and heavy-duty upper and lower ball joints for Silverado, F-150, Ram, Wrangler, Tacoma, 4Runner, Camaro, Mustang, Civic, Jeep, GM HD, and Ford Super Duty applications. Black Ops Auto Works carries 99 ball-joint SKUs across pressed-in replacements, bolt-in service kits, heavy-duty off-road upgrades, control-arm replacement joints, boots, and specialty steering components. Filter by year, make, model, trim, engine, and drivetrain before ordering. What Ball Joints Do Ball joints connect the control arm to the steering knuckle while allowing the suspension to move and the wheel to steer. Worn joints can cause steering looseness, uneven tire wear, clunks, and poor alignment stability. Upper and Lower Locations Many vehicles use upper and lower ball joints, but the configuration varies by suspension design. Verify the exact axle position ...

Plan Lexus GS300 intake, damper and body-accessory purchases around the exact generation and installed engine. Early GS300 applications and later body configurations require separate checks. Intake and Crankshaft-Damper Configuration The displayed Injen intake references include 1992–1995 GS300 applications. Confirm exact manufacturer coverage, sensor housing and heat-shield mounting before extending the intake to another production range. For a JZ-engine damper, identify the actual engine, crank interface and accessory drive. Standard, underdrive and dry-sump configurations have different pulley and installation requirements; the engine-family name alone is insufficient. Body Accessories and Modified Vehicles For window deflectors, compare actual body generation, door count and tape-on mounting pattern rather than relying on a broad shared GS title. Review surface preparation and package contents. For vertical-door hardware, review the exact body application, complete hinge-kit con...

Choose Lexus GS350 suspension and brake components using drivetrain, adaptive-suspension equipment and brake package. Those details are central to comparing the listed RWD and AWD damper applications. RWD, AWD and Adaptive Suspension Match front-left, front-right and rear damper numbers individually. Confirm whether the listing supports the fitted adaptive system and whether electronic operation changes with the replacement. Record F Sport equipment, spring changes and ride height. A damper title describing adaptive-suspension vehicles should not be read as a promise that every original electronic function is retained. Rear Brake Kits and Engine Accessories For rear pad-and-rotor packages, compare caliper, pad shape, rotor dimensions and axle quantities before selecting compound or rotor slots. F Sport and other brake packages require their own checks. An RC350 intake or pedal-device title needs explicit GS350 support. Compare intake sensor, hose and bracket interfaces or the exact ...

Compare Lexus GS430 intake systems, V8 dampers and brake-service kits using the exact production and installed equipment. The displayed Injen intake applications reference 2001–2003 GS430 vehicles. Intake Installation and Finish Confirm the exact intake number, sensor housing, hose connections and mounting arrangement for the 4.3L application. Shared LS430 or SC430 wording is useful only where the manufacturer also lists the GS430. Compare black and polished versions after confirming identical application and contents. Review emissions restrictions and installation instructions rather than extending one year range to later GS430 generations. Damper, Brakes and Pedal Electronics Match a UZ-family damper to the installed engine, crank interface, pulley alignment and accessory drive. Record any engine or accessory-drive modifications. For brake kits, identify caliper, pad shape, rotor dimensions and axle coverage. For pedal devices, confirm the exact connector and supported vehicle; a ...

Plan Lexus GS450h brake and suspension service around its hybrid application and fitted equipment. Compare the service scope of each component before choosing a complete package. Dampers and Adaptive Equipment Record the drivetrain, adaptive-suspension specification and corner being serviced. Match the exact damper number and confirm its electronic-operation provisions. The displayed GS350 RWD damper references require explicit GS450h support. Review springs, mounts and protection pieces separately from the damper itself. Brake Kits and Pedal Devices Match pads to the caliper and rotors to the required diameter, thickness and mounting. Compare one-axle and broader kit contents, including required supporting hardware. For a pedal-response device, verify hybrid-vehicle coverage and connector. Sensitivity settings change pedal response; they do not establish additional rated hybrid-system output. Choose Your Part Identify hybrid generation and adaptive equipment. Match suspension posi...

Choose Lexus GS460 brake kits and exterior accessories using exact body generation and installed brakes. Match the service application first, then compare rotor design, compound and finish. Pad Compounds and Rotor Configurations The listed EBC families pair different friction compounds with RK, USR, GD or BSD rotor configurations. Compare the exact kit number, axle and intended use rather than treating kit families as interchangeable. Measure rotor diameter and thickness and identify pad shape. Review bedding, rotor-material requirements and street or track suitability for the chosen compound. Supporting Hardware and Window Deflectors Check whether retainers and other installation pieces are included with the pads or require a separate hardware kit. Front and rear quantities should follow the actual service plan. For the displayed tape-on deflectors, compare body generation, door configuration and outside-mount pattern. Review the four-piece package, finish and surface-preparation i...

Use the dedicated Lexus IS F identity when requesting parts. IS250 or IS350 F Sport equipment belongs to a different model application and should not be used as a substitute for IS F identification. Identify the Installed IS F Equipment Provide model year, production, original market and any brake, wheel or suspension changes. Use existing component markings or original-equipment numbers to define the part being replaced. For a brake inquiry, include caliper identification, pad shape, rotor dimensions and axle. For suspension, include the service position and current spring or damper arrangement. Plan a Specific Parts Inquiry Describe the repair or accessory goal and provide the proposed manufacturer number if known. Confirm exact IS F coverage before comparing materials or appearance. This page does not establish availability for an unspecified component. Request support for the exact application rather than assuming every IS-family product fits the dedicated F model. Choose Your P...

Compare Lexus IS200T intake and brake options using the exact 2.0L turbo application. The displayed Injen intake references cover 2016–2017 IS200T vehicles; verify the exact part number and installation requirements. Intake Connections and Finish Compare the sensor housing, hose connections, brackets and supplied hardware before choosing polished or black finish. Confirm application coverage and emissions restrictions for the selected intake. The shared RC200T reference does not extend coverage to every RC or IS engine. Keep the actual IS200T engine and production details with the manufacturer part number. Brakes, Dampers and Pedal Devices For rear brake kits, identify calipers, pad shape, rotor dimensions and complete axle contents. Match suspension dampers by actual production, drivetrain and position, especially where the title references earlier IS250/350 vehicles. For pedal-response devices, verify vehicle electronics and connector. A displayed RC F axle-back exhaust title does...

Choose Lexus IS250 intake, damper and exterior-accessory options using production, drivetrain and body configuration. Compare the exact application before selecting finish or package size. Intake and Pedal Connections The displayed Injen intake references cover 2006–2015 IS250 2.5L V6 applications. Confirm exact manufacturer coverage, sensor provisions, hose routing and mounting hardware. For pedal devices, verify the supported IS250 application and connector. RC350 or Subaru wording in another device title does not establish IS250 compatibility. Dampers and Window Deflectors Match front-left and front-right dampers individually, including drivetrain and suspension requirements. Different displayed year ranges need their own part-number checks. For the 2006–2013 outside-mount tape-on deflector reference, compare actual body and door configuration. Review four-piece contents, finish and surface-preparation instructions. Choose Your Part Record year, body and drivetrain. Match intake...

Choose Lexus IS300 parts using the exact generation and installed engine. Earlier inline-six intake and damper applications must be kept separate from later turbo or V6 configurations. Early Inline-Six Intake and Damper Selection The displayed Injen inline-six intake references identify 2000–2005 applications. Confirm the manufacturer’s market and year coverage, sensor housing, mounting and supplied manifold-cover requirements. For a JZ-family damper, compare the crank interface, accessory drive and required pulley configuration. Standard, underdrive and dry-sump versions should be selected for the actual engine build, not the IS300 badge alone. Later Applications and Modified Cars The displayed IS200T/RC200T intake references require explicit support for the particular later IS300 engine and chassis. Record engine identification and drivetrain rather than assuming all IS300 models share one layout. For pedal devices or engine modifications, provide the exact supported part number a...

Compare Lexus IS350 intake and brake-service options using exact production, drivetrain and fitted equipment. Choose physical application and installation scope before finish or compound. Intake and Exterior Accessory Fit The displayed Injen intake versions reference 2006–2020 IS350 3.5L V6 applications. Confirm exact year coverage, sensor provisions, hoses, brackets and emissions requirements. For the listed 2006–2013 tape-on window deflectors, compare body and door configuration, outside-mount pattern and four-piece contents. The intake year range does not establish deflector body coverage. Brake Kits and Pedal Devices Match rear pads and rotors to calipers, backing-plate shape and rotor dimensions. Review F Sport or other brake-package requirements and distinguish supporting hardware from complete friction kits. For a pedal-response device, verify the IS350 connector and supported application. Similar RC350 or unrelated vehicle titles do not replace an exact manufacturer check. C...

Shop SPC Performance alignment parts and professional service tools by exact manufacturer part number, including adjustable control arms, ball joints, camber and caster kits, toe components, bushings, shims, alignment hardware, and specialty tools.Choose Your Part Match the complete SPC manufacturer part number Confirm the full year, make, model, mounting position, suspension configuration, and application notes Compare correction range, component dimensions, material, interface, and included hardware Plan for professional installation and a complete post-installation alignment Vehicle FitmentUse vehicle filters to narrow the selection, then verify every engine, drivetrain, chassis, mounting and factory-equipment requirement in the product details. Components selected by dimensions or system interface require a complete specification check rather than a vehicle-name match.Related SPC Performance Products All SPC Performance products SPC EZ Cam XR 12mm bolts SPC front adjustable uppe...

Suspension parts and complete kits for cars, trucks, SUVs, Jeeps, and off-road builds are stocked at Black Ops Auto Works. Shop coilovers, lowering springs, lift kits, leveling kits, shocks and struts, sway bars, control arms, tie rods, ball joints, bushings, chassis bracing, alignment hardware, air suspension, and complete stage kits from Bilstein, KW, Ohlins, Fox, KING, ICON, BC Racing, Silvers, Eibach, H&R, Swift Springs, Whiteline, Energy Suspension, Moog, SPC Performance, Rough Country, ReadyLIFT, BDS, Skyjacker, Air Lift, Firestone, and Black Ops Auto Works. Start with a matched shock and spring package or a full coilover kit, then layer in sway bars, chassis bracing, and camber adjustment hardware. Every part is filterable by year, make, model, trim, and drivetrain to confirm fitment before ordering. What This Category Covers Suspension is the highest-leverage handling upgrade on any vehicle. A properly matched shock, spring, and sway bar package produces measurable i...