SPC 83185 Mazda MX-5 front camber caster cam bolt pair
SPC 83185 front alignment cam installation locations
Click to zoom in
View vehicle applications

Description

Replace worn factory alignment cams and lock in repeatable front settings

SPC Performance 83185 replaces corroded, stripped, or damaged front alignment cam assemblies on the third-generation Mazda MX-5 Miata. The heat-treated cams resist stripping and warping while providing up to plus or minus 1 degree of front camber adjustment per wheel.

Key Features

  • 83185 pair of heat-treated front alignment cam bolts
  • Fits the manufacturer-listed third-generation MX-5 and MX-5 Miata
  • Provides plus or minus 1 degree of camber adjustment
  • Supports camber and caster alignment at the factory cam locations
  • One kit services one front wheel
  • Limited lifetime manufacturer warranty

Application Details and Restrictions

Years Make Model Verified Application and Notes
2006-2015 Mazda MX-5 and MX-5 Miata Front suspension; one kit per wheel
Quantity note Mazda MX-5 front axle Order two kits when replacing cams at both front wheels

Specifications

Detail Value
Manufacturer Part Number 83185
Position Front
Adjustment Camber and caster
Camber Range Plus or minus 1 degree
Construction Heat-treated cam bolts
Quantity One pair for one wheel
Warranty Limited lifetime
California Proposition 65 Warning: Cancer and reproductive harm. See www.P65Warnings.ca.gov.

What's Included

  • Two 83185 heat-treated cam bolts
  • Matching eccentric washers and retaining nuts for one front wheel

About SPC Performance

SPC Performance develops alignment hardware for factory replacement and expanded adjustment. Heat-treated cams are intended to hold alignment settings without the stripping or distortion associated with damaged original assemblies.

Related Parts

  • A second identical kit when servicing both front wheels
  • SPC 87400 and 74910 alignment service tools listed by the manufacturer
  • Professional four-wheel alignment service

FAQ

What is the 83185?

It is a heat-treated front camber and caster cam bolt kit for one manufacturer-listed Mazda MX-5 front wheel.

Which years fit?

SPC lists 2006-2015 Mazda MX-5 and MX-5 Miata applications.

How many wheels does one kit service?

One kit services one front wheel, so two kits are needed for both front wheels.

How much camber adjustment is available?

SPC specifies plus or minus 1 degree of camber adjustment.

Why replace the original cams?

The kit is intended to replace corroded or stripped factory alignment cam assemblies.

Are the cams heat treated?

Yes. SPC identifies the cams as heat treated to resist stripping and warping.

Is an alignment required?

Yes. Camber, caster, and toe must be measured and set after installation.

What warranty applies?

SPC lists a limited lifetime warranty, subject to its current terms and professional installation requirements.

Installation Instructions

  1. Confirm the package identifies 83185 and the vehicle is a 2006-2015 Mazda MX-5 or MX-5 Miata.
  2. Have trained personnel inspect the front suspension and record initial alignment measurements.
  3. Raise and support the vehicle using approved points, then remove the wheel.
  4. Mark the original cam orientation before removing damaged or corroded assemblies.
  5. Install the heat-treated cams and matching hardware in the correct factory locations.
  6. Set preliminary cam positions without exceeding the manufacturer adjustment range.
  7. Torque all hardware to current Mazda and SPC specifications at the required suspension position.
  8. Complete a professional alignment and verify camber, caster, toe, clearance, and fastener security.

SPC Performance Front Camber Caster Cams for 2006-2015 Mazda MX-5 Miata

SPC83185
082642831853
Camber and Caster Cam Bolt Kit
90 Units In Stock
$ 34.91
$ 34.91

Military & First Responders

Military & First Responders

A program for military members and first responders, with dedicated verification and support for your next build.

Learn More & Apply

Your cart

×