-10%
SPEC SN351 Stage 1 clutch pressure plate and organic disc
Click to zoom in
View vehicle applications

Description

Street-friendly holding power with progressive engagement

SPEC SN351 is a Stage 1 clutch kit for the verified 2003-2006 Nissan 350Z and Infiniti G35 applications below. Its full-face organic disc and high-clamp pressure plate are designed to increase holding capacity while retaining smooth, progressive engagement for performance street use.

Key Features

  • SN351 uses a high-clamp-pressure plate
  • Steel-backed, multi-compound woven organic friction material
  • Full-face, double-sprung hub and disc assembly
  • Heat-treated hub components for strength and durability
  • Manufacturer-rated 385 lb-ft torque capacity at the flywheel
  • Designed for street, drag, drift, road race, rally, pulling, and autocross use

Fitment

Years Make Model Submodel Requirement
2003-2006 Infiniti G35 Base Manual transmission
2004-2006 Infiniti G35 X Manual transmission
2005 Nissan 350Z 35th Anniversary Edition Manual transmission
2003-2006 Nissan 350Z Base Manual transmission
2003-2006 Nissan 350Z Enthusiast Manual transmission
2005-2006 Nissan 350Z Grand Touring Manual transmission
2003-2005 Nissan 350Z Performance Manual transmission
2003-2006 Nissan 350Z Touring Manual transmission
2003-2006 Nissan 350Z Track Manual transmission

This application does not cover the 2007-2008 Nissan 350Z, which uses a different SPEC part number and bearing arrangement.

Specifications

Detail Value
Manufacturer Part Number SN351
Product Line Stage 1
Product Type Single-disc performance clutch kit
Friction Material Steel-backed multi-compound woven organic
Disc Configuration Full-face double-sprung hub
Manufacturer Torque Capacity 385 lb-ft at the flywheel
Package Dimensions 14.4 x 14.3 x 3.4 in
Package Weight 19.5 lb
Condition New

What's Included

  • One SPEC SN351 Stage 1 high-clamp pressure plate
  • One matching full-face organic sprung clutch disc
  • Application-specific replacement bearing components and alignment tool supplied with the exact kit
  • Flywheel is not included

About SPEC

SPEC designs, builds, and tests performance clutch systems and billet flywheels in the United States. Its catalog separates applications by vehicle, clutch stage, disc construction, torque capacity, and required companion components.

Related Parts

  • SPEC SN35S steel flywheel for supported 2003-2006 applications
  • SPEC SN35A aluminum flywheel for supported 2003-2006 applications
  • Inspect the release system, pilot support, clutch fork or slave cylinder, rear main seal, and transmission input shaft before installation

FAQ

What is the SN351?

It is a Stage 1 single-disc performance clutch kit for the verified Nissan 350Z and Infiniti G35 applications listed above.

What torque capacity does this clutch have?

SPEC rates this application at 385 lb-ft measured at the flywheel.

Is this clutch intended for street use?

Yes. Its full-face organic friction material is designed for progressive engagement and performance street use.

Does it fit a 2007 or 2008 Nissan 350Z?

No. Those model years use a different clutch part number and bearing arrangement.

Is a flywheel included?

No. A compatible flywheel must be serviced or purchased separately.

Can the existing flywheel be reused?

SPEC requires the existing flywheel to be properly resurfaced unless a new compatible flywheel is installed.

Is a break-in period required?

Yes. Complete at least 500 miles of primarily city or stop-and-go driving before full-throttle engagement, hard launches, or speed shifting.

Does this fit an automatic transmission?

No. This clutch kit is for the verified manual-transmission applications only.

Installation Instructions

  1. Confirm the exact vehicle application, manual transmission, and SN351 before removing the transmission.
  2. Review current SPEC and vehicle-manufacturer service procedures, disconnect the battery, and support the vehicle and drivetrain safely.
  3. Inspect the flywheel, rear main seal, pilot support, release bearing, clutch fork or slave cylinder, and transmission input shaft.
  4. Resurface the existing compatible flywheel or install a verified new flywheel before fitting the clutch.
  5. Install the disc and pressure plate in the documented orientation using the specified tightening sequence and torque values.
  6. Reinstall the transmission without forcing it against the clutch hub, restore the release system, and verify correct pedal operation.
  7. Check for leaks, abnormal noise, vibration, and full release before road use.
  8. Complete at least 500 miles of primarily city or stop-and-go break-in driving before applying full torque.

SPEC Stage 1 Clutch Kit for 2003-2006 Nissan 350Z & Infiniti G35

SPEC
SPECSN351
Clutch Kits - Single
1 Units In Stock
$ 559.00 $ 498.10
$ 498.10

Military & First Responders

Military & First Responders

A program for military members and first responders, with dedicated verification and support for your next build.

Learn More & Apply

Your cart

×