Click to zoom in
Built for Serious Tire Carriers: Heavy Duty 3-Point Spare Tie-Down That Holds 36 to 48 Inch Tires Securely
The SpeedStrap SSP26550 is a 2-inch heavy duty 3-point spare tire tie-down with swivel hooks, designed for securing oversized spare tires on Jeep tire carriers, truck beds, roof racks, and chase vehicle configurations. Each of the three points is fully adjustable, allowing the center ratchet to be positioned precisely for the tire diameter and carrier geometry in use. The swivel hooks are built to connect to almost any tab or rail regardless of orientation, including vertical tabs, horizontal rails, and round tube frames. The swivel hooks also detach if a soft-loop wrap configuration is preferred. The SSP26550 is constructed from 2-inch polyester webbing with a deluxe wide-grip ratchet mechanism and swivel hooks featuring built-in retention clips that prevent disconnection under load. Designed for Jeep, truck, and buggy spare tire applications fitting approximately 36 to 48 inch tire diameters.
Key Features
- 3-point Y-strap design for balanced load distribution across the spare tire
- Fully adjustable 3 attachment points allow precise positioning on any tire carrier
- Swivel hooks attach to almost any tab or rail regardless of orientation
- Detachable swivel hooks allow wrap-around tube frame attachment
- Built-in retention clips on all hooks prevent accidental unhooking under load
- Deluxe wide-grip ratchet mechanism with built-in locking feature
- 2-inch polyester webbing construction rated for heavy duty use
- Designed for spare tire diameters approximately 36 to 48 inches
Specifications
| Detail | Value |
|---|---|
| Part Number | SSP26550 |
| Brand | SpeedStrap |
| Webbing Width | 2 Inch |
| Configuration | 3-Point Y-Strap |
| Hook Type | Swivel with Built-In Retention Clip |
| Compatible Tire Size | Approximately 36 to 48 Inch Diameter |
| Material | Polyester Webbing |
| Ratchet | Deluxe Wide-Grip with Locking Feature |
| Quantity | 1 (Sold Individually) |
| UPC | N/A |
What's Included
- 1 SpeedStrap SSP26550 2-inch HD 3-point spare tire tie-down with swivel hooks
About SpeedStrap
SpeedStrap designs and manufactures purpose-built tie-down systems for off-road, motorsport, and truck applications. The SSP26550 is part of SpeedStrap's Jeep and truck tie-down line, engineered for the heavier loads and irregular carrier configurations found on Jeep builds, chase trucks, and off-road race vehicles. SpeedStrap products are built to withstand repeated use in demanding environments where a failed tie-down can result in lost cargo or vehicle damage.
Frequently Asked Questions
What tire sizes does the SpeedStrap SSP26550 fit?The SSP26550 is designed for spare tire diameters approximately 36 to 48 inches. This covers most standard Jeep and truck oversize spare tire applications. For smaller tires below 36 inches, SpeedStrap makes alternative tie-down configurations.
Can the SSP26550 hooks be removed for a soft-loop installation?Yes. The swivel hooks on the SSP26550 are removable. If you prefer to wrap the strap ends around a tube frame or rail without using the hooks, the hooks can be detached and the strap ends looped back through the 3-bar adjuster for a clean frameless attachment.
Does the SSP26550 work on a roof rack spare tire mount?Yes. The adjustable attachment points and swivel hooks make the SSP26550 compatible with most roof rack tire carrier configurations including horizontal and vertical tab mounting. The swivel function allows the hooks to connect regardless of tab orientation.
How many units does the SSP26550 include?The SSP26550 is sold individually as one complete 3-point tie-down assembly. One unit is typically sufficient to secure a spare tire on a standard Jeep tire carrier or truck bed mount.
Will the SSP26550 work on a bumper-mounted spare tire carrier?Yes. The SSP26550 is designed for Jeep, truck, and buggy tire carrier applications which includes bumper-mounted carriers. The 3-point design and adjustable attachment points allow it to adapt to the geometry of most bumper carrier designs.
What is the working load of the SSP26550?SpeedStrap builds the SSP26550 from 2-inch polyester webbing with a heavy-duty ratchet mechanism for high-load spare tire applications. For specific working load and maximum rated capacity specifications, verify current load ratings with SpeedStrap directly.
Can the SSP26550 be used for cargo tie-down other than spare tires?The SSP26550 is specifically designed for spare tire securing applications with its 3-point Y-strap configuration. For general cargo tie-down, SpeedStrap offers dedicated single-strap cargo tie-down products better suited to securing flat or box-shaped loads.
Does the SSP26550 include retention clips on all hooks to prevent unhooking?Yes. All swivel hooks on the SSP26550 include built-in retention clips that prevent the hook from backing off an attachment point under load or vibration. This is a key safety feature for spare tire applications where vibration during off-road driving could otherwise cause hooks to walk off attachment tabs.
Installation Instructions
- Mount the spare tire to the carrier in the normal position.
- Route the center point of the SSP26550 over or behind the top of the tire tread.
- Adjust the three strap lengths to position the center ratchet where you want it, typically above or centered on the tire.
- Connect the three swivel hooks to the carrier attachment tabs. Engage the retention clip on each hook.
- Ratchet the center assembly to tension the strap evenly across all three attachment points until the tire is held firmly without movement.
- Verify all retention clips are fully engaged and the tire does not shift before driving.
Body Armor & Protection
Body armor and protection for trucks and Jeeps is stocked at Black Ops Auto Works. Shop rock sliders, skid plates, fender flares, and underbody protection built for Chevrolet Colorado, RAM 1500 TRX, Toyota Tundra and Tacoma, and Jeep Gladiator. These parts guard the frame, fuel tank, transfer case, and rocker panels from rock strikes, brush, and trail debris. Black Ops Auto Works carries 957 body armor SKUs, all filterable by year, make, model, and trim to confirm correct fitment. What This Category Covers Body armor and protection includes rock sliders, skid plates, differential covers, fender flares, and rocker panel guards designed to shield the underside and lower body of a truck or Jeep during off-road driving. This category ranges from bolt-on rock sliders to full underbody skid plate systems. Rock Sliders and Rock Rails Rock sliders bolt or weld to the frame rails beneath the doors, protecting rocker panels from rock strikes while also serving as a step for entry and exit...
View Body Armor & Protection Products
Cargo Tie-Downs
Cargo tie downs for truck beds and trailers are stocked at Black Ops Auto Works. Shop ratchet straps, cam buckle straps, D rings, bed anchors, axle straps, soft loops, spare tire tie downs, cargo nets, bungee cords and rack tie points for Silverado, F 150, Ram, Tacoma, Tundra, Ranger, Colorado, Jeep and utility trailer hauling. Every product is filterable by year, make, model, trim, engine and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 74 cargo tie-downs SKUs across fitment focused applications, materials, sizes and installation needs. What This Cargo Tie-Downs Collection Covers Cargo tie downs secure gear in truck beds, on roof racks, in trailers and on flatbeds. The collection covers light duty straps for recreational equipment, heavy duty ratchet systems for larger loads, vehicle tie downs and anchor hardware for adaptable cargo management. Application First Shopping Use the product listing details and catalog filters to confirm the exac...
View Cargo Tie-Downs Products
Exterior Parts & Accessories
Exterior parts and accessories for cars, trucks, SUVs, and Jeeps are stocked at Black Ops Auto Works. Shop bumpers, grilles, fender flares, running boards, nerf bars, tonneau covers, mud flaps, front lips, splitters, spoilers, diffusers, body kits, carbon fiber panels, roof racks, bed accessories, tow hooks, and car covers for daily drivers, work trucks, and performance builds. Every product is filterable by category, brand, and vehicle year, make, model, and trim so the correct fitment ships the first time. Black Ops Auto Works carries 9,697 exterior parts SKUs across style, protection, and utility categories. What This Category Covers Exterior parts change how a vehicle looks, protects itself, and hauls gear. Fitment depends on body style, cab and bed configuration, and factory sensor or camera equipment, so confirm compatibility before ordering. Appearance Upgrades Grilles, front lips, splitters, spoilers, diffusers, and body kits update the front end and aero character of a ...
View Exterior Parts & Accessories Products
SpeedStrap
SpeedStrap parts and accessories SpeedStrap parts and accessories for race trailers, off-road rigs, UTVs, ATVs, motorcycles, boats and vehicle transport are stocked at Black Ops Auto Works. Shop ratchet straps, cam-lock tie-downs, axle straps, tire bonnets, spare-tire holds, recovery straps, soft ties, direct hooks, storage bags and trailer hardware. Every product is filterable by year, make, model, trim, engine and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 31 SpeedStrap SKUs across fitment, component design, installation requirements and performance goals. What This SpeedStrap Collection Covers SpeedStrap builds securement and recovery equipment for moving vehicles and gear. The range includes light-duty cam-lock straps, heavy-duty wheel and axle systems, recovery straps and organized storage for trail or track support. Ratchet and Cam-Lock Tie-Downs Fitment and setup notes Ratchet tie-downs provide high clamping force for vehicle transpo...
View SpeedStrap Products