SpeedStrap 2In x 10Ft Ratchet Tie Down w/ Twisted Snap Hooks & Axle Strap Combo - Black

The Last Jeep and Truck Tie-Down You'll Need: 10,000 lb Rated with Twisted Hooks and Built-In Axle Wrap

The SpeedStrap SSP27011 is a 2-inch by 10-foot ratchet tie-down with twisted snap hooks and a built-in axle wrap combo, engineered specifically for securing Jeeps, trucks, and buggies. With a 10,000 lb maximum rated capacity and a 3,333 lb safe working load, the SSP27011 is built for heavy-duty transport applications. The high-quality ratchet mechanism features a wide handle molded grip and cushioned release handle for leverage and comfort during tightening and release. Twisted snap hooks at both ends resist unhooking and maintain connection under load and vibration. The built-in axle wrap with protective sleeve allows the SSP27011 to be attached directly around axles or frame points without scratching or cutting into the vehicle. Available in Black or Red. Sold individually.

Key Features

• 2-inch polyester webbing rated at 10,000 lb maximum capacity and 3,333 lb safe working load
• Twisted snap hooks on both ends resist unhooking under load and vibration
• Built-in axle wrap with protective sleeve for axle or frame attachment without scratching
• Wide handle ratchet mechanism with molded grip and cushioned release lever
• 10-foot length provides range for full-size truck and Jeep transport configurations
• Locking release mechanism prevents accidental strap loosening during transport
• Available in Black or Red

Specifications

What's Included

• 1 SpeedStrap SSP27011 2-inch x 10-foot ratchet tie-down with twisted snap hooks and axle strap combo (Black)

About SpeedStrap

SpeedStrap is an American manufacturer of tie-down systems purpose-built for off-road, motorsport, and truck hauling applications. The SSP27011 is part of SpeedStrap's Jeep and truck tie-down line and is engineered for the repeated high-load use cycles encountered during competitive off-road racing, overlanding transport, and professional recovery operations. SpeedStrap's tie-downs are designed to the specific loading and attachment geometry of Jeep, truck, and buggy builds rather than generic cargo applications.

Frequently Asked Questions

The SSP27011 has a 10,000 lb maximum rated capacity and a 3,333 lb safe working load. These ratings reflect the heavy-duty ratchet mechanism and 2-inch polyester webbing construction designed for truck, Jeep, and buggy transport applications.

Yes. The SSP27011 includes a built-in axle wrap with a protective sleeve. The axle wrap allows the strap to attach cleanly around an axle or frame rail without the twisted snap hooks, and the sleeve prevents the webbing from cutting into or scratching the axle or frame during transport.

The SSP27011 is specifically designed for Jeeps, trucks, and buggies. Its 2-inch width, 10-foot length, and 10,000 lb capacity make it well-suited for full-size trucks, Jeep Wrangler and Gladiator models, and race buggy transport configurations where tie-down attachment must reach across a trailer bed to frame points.

Yes. The twisted snap hooks are specifically designed to resist unhooking under load and vibration. Unlike standard J-hooks, the twisted configuration creates a more secure engagement with rail slots and D-rings on trailer tie-down rails. The hooks include retention features to prevent walking off an attachment point during transport.

The SSP27011 uses a ratchet mechanism rather than a cam buckle, which allows the strap to be tensioned to a much higher and more precise load. Cam buckles are typically limited to lighter loads, while the ratchet mechanism in the SSP27011 provides consistent high-tension clamping force for heavy trucks and Jeeps.

Yes. The ratchet mechanism on the SSP27011 features a locking release lever that locks the ratchet closed after tensioning. This prevents the strap from loosening due to vibration during transport until the release is intentionally triggered.

Yes. The SSP27011 is designed for exactly this application. The 10-foot length provides enough reach to attach from a Jeep axle or frame to standard trailer tie-down rail positions, and the 10,000 lb capacity is appropriate for Jeep Wrangler and Gladiator weights.

The SSP27011 is sold individually as one strap. Most flatbed and open trailer transport configurations require 4 tie-down points, so purchasing multiple SSP27011 units is typical for a complete setup.

Installation Instructions

1. Position the vehicle on the trailer and set the parking brake before attaching any tie-downs.
2. Route the SSP27011 from the trailer tie-down rail to the vehicle axle or frame attachment point.
3. Use the built-in axle wrap when attaching to a round axle tube, wrapping around the axle and feeding the snap hook back through the loop.
4. Connect the twisted snap hook at the trailer rail end to the tie-down D-ring or rail slot, ensuring the hook is fully engaged.
5. Thread the webbing through the ratchet spool and pull through until light tension is applied.
6. Ratchet the mechanism to the desired tension, checking that the vehicle does not move side to side or fore and aft.
7. Lock the ratchet release lever to secure the strap in the tensioned position.
8. Repeat for all four corners of the vehicle and confirm the vehicle is secured before moving the trailer.