SPL Parts Porsche 981/991 Front Trailing Arms

Shop alignment components, camber kits, caster kits, and adjustable control arms at Black Ops Auto Works. Find vehicle-specific parts for correcting suspension alignment or preparing a performance setup, including toe links, adjustment cams, camber plates, and replacement mounts. Choose components based on your vehicle, suspension configuration, and measured alignment needs. Camber, Caster, and Toe Correction Camber describes the inward or outward tilt of a wheel when viewed from the front. Caster describes the steering axis angle when viewed from the side. Toe describes whether the wheels point inward or outward when viewed from above. Each measurement has a different role, so the right correction part depends on which angle needs adjustment. This collection includes options from Black Ops Auto Works, AAD Performance, SPC Performance, Eibach, SuperPro, Whiteline, and other suspension brands. Adjustment capability varies by product. A camber kit does not automatically provide caster...

Control arms for lifted trucks, SRT and Hellcat platforms, and off-road builds are stocked at Black Ops Auto Works. Shop tubular steel upper control arms, billet adjustable control arms, rear toe links, camber arm kits, and vehicle-specific control arm sets for Jeep Grand Cherokee and Trackhawk, Dodge Durango, Charger, Challenger, 300, and Magnum, Toyota 4Runner and FJ Cruiser, Lexus GX460 and GX470, Ford Mustang, and GM 1500 trucks. Every product is filterable by year, make, model, trim, and lift height so the correct control arm ships the first time. Black Ops Auto Works carries 789 control arm SKUs across upper, lower, adjustable, and toe link categories. What This Collection Covers Control arms connect the wheel hub and knuckle assembly to the vehicle frame and control wheel travel through compression and droop. Worn OEM control arms with loose ball joints or deteriorated bushings cause vague steering, uneven tire wear, and handling inconsistency. This collection covers arm ...

Find Porsche 718 Boxster exhaust, wind-management and brake parts by exact engine and equipment. Separate turbo four-cylinder exhaust applications from other 718 powertrains. Exhaust Sound and Engine Application AWE’s 718 suite identifies 2.0T/2.5T Boxster/Cayman applications. Track Edition has an intentionally more pronounced sound; compare actual sound expectations, tips and kit contents before choosing. The displayed Borla S-Type reference names a 2.0L four-cylinder application. Verify exact manufacturer number, production, valve/equipment requirements and supplied pipework rather than extending one listing to every trim. Wind and Brake Equipment Match the AWE Foiler by exact body/application and installation location. It addresses wind buffeting, separately from exhaust sound or engine output. Identify caliper, rotor material and service side before choosing rotors or race pads. DTC-60/DTC-70 use needs review; shared 911 or other-model hardware requires exact support for the ins...

Compare Porsche 718 Cayman exhaust and brake parts using exact engine, production and installed equipment. Confirm trim-specific applications before choosing a sound or friction upgrade. Turbo-Engine Exhaust Choices AWE identifies 2.0T/2.5T applications in its 718 Boxster/Cayman suite. Compare Track Edition’s more pronounced sound with your intended use and review exact tips and supplied components. The displayed Borla listing names a 2.0L four-cylinder S-Type application. Confirm the exact part number, engine, valve/equipment and production support instead of extending it across every Cayman trim. Brakes and Wind Management Match front/rear caliper, rotor material and service side before selecting friction or drilled rotors. DTC race compounds require review of intended operating conditions. Wear-sensor wires and fitting hardware need exact connector and brake-system support. AWE Foiler application is a separate body/wind-management choice, not an engine or exhaust component. Choos...

Find Porsche 718 Spyder chassis, wheel and control accessories by exact production and equipment. Confirm original Spyder or other variant identity and installed suspension before selecting shared 718 references. Suspension Electronics and Chassis Parts A 991 damping-cancellation kit or 981/991 arm reference requires exact Spyder application and installation support. Identify the installed damping system and replacement suspension plan first. Match end-link mounts, length and clearance to actual chassis geometry. A shared 996/997/987 label does not establish every 718 installation. Wheel, Filter and Pedal Interfaces Spacers and locking bolts need actual bolt pattern, centre bore, thread, seat, length/engagement and wheel clearance. The displayed radius-seat bolt is a specific selection, not a universal wheel fastener. Confirm throttle-booster harness/control support, filter/airbox geometry and brake-sensor connections independently. A 2.7/3.4L Boxster/Cayman filter reference does no...

Find Porsche 911 exhaust, cooling and carbon-fiber body parts by generation, engine and exact body specification. Keep Carrera, Turbo and GT-model applications separate. Cooling and Exhaust by Generation A 991.2 Turbo/Turbo S intercooler reference services a specific turbo-engine charge-air application. Confirm exact engine, mounting, connections and supplied supporting components. 997.2 crossover pipes and a 991 Carrera exhaust are separate systems. Review body, engine, valve behavior and stock-tip reuse requirements for the exact part number. Carbon-Fiber Body and Wind Accessories Match hood, duct, splitter and vent references to exact 991/991.2/992 and GT body equipment. A GT2 RS-style appearance does not establish every underlying model’s mounting compatibility. Separate 991/981/718 Foiler coverage from a 992 version. Review body mounting, finish, supporting hardware and installation preparation before ordering. Choose Your Part Identify generation, engine, trim and body specif...

Find Porsche Boxster brake and body-accessory parts by exact generation, engine and body equipment. Confirm installed assemblies before extending shared Porsche references. Brake Assembly and Service Side Match front/rear caliper, rotor dimensions/material and service side to the actual car. 718, Cayman or 911 titles require exact supported Boxster application. Race pads need review of intended operating conditions after fit is established. Confirm sensor and fitting-hardware requirements independently from pad contents. Wind and Carbon-Fiber Applications Match the AWE Foiler to exact body/generation and installation location. It is a wind-management accessory with separate requirements from brake or engine parts. 991 mirror housings or GT-style hoods are not established Boxster fit by Porsche branding alone. Verify exact panel/body mounting, finish and installation requirements; ask about current availability for the selected component. Choose Your Part Identify generation, produc...

Find Porsche Cayman brake and body-accessory parts by generation, engine and installed equipment. Confirm the exact chassis before selecting shared Boxster or 911 references. Caliper and Rotor Application Match front/rear caliper, rotor dimensions/material and service side to the actual car. A 718 or 911 rotor title is not confirmation of every Cayman application. DTC race-compound references require review of intended operating use after fit is established. Confirm sensor provisions and fitting hardware independently. Body Panels and Wind Management Select the AWE Foiler for the exact generation/body and mounting location. Review installation contents and preparation separately from engine or brake components. 991 mirror housings and GT-style hoods require explicit Cayman body/mounting support. Confirm finish, hardware and current availability for the exact panel before ordering. Choose Your Part Identify generation, production and actual engine/body. Match rotor material, caliper...

Shop Porsche parts by exact model, generation and installed equipment. Use the model-specific collections to compare exhaust, cooling, brake and body-accessory requirements. Start with the Correct Porsche Model For generation-specific exhaust, cooling and carbon-body guidance, explore Porsche 911 parts. Keep Carrera, Turbo and GT applications separate within that selection. For mid-engine coupe applications, visit 718 Cayman parts. Exhaust engine coverage, brake material and body equipment remain part-specific checks. SUV and Electric Applications Compare engine-specific exhaust and brake-service choices in Macan parts. Combustion and electric Macan applications require separate selections. For body, cabin and brake guidance on the electric car, explore Taycan parts. Match exact body/trim and installed brake equipment rather than transferring another model’s application. Choose Your Part Choose exact model, generation and production. Confirm actual engine/powertrain and body. Recor...

Shop SPL Parts suspension arms, caster rods, camber links, toe arms, traction links, sway bar endlinks, bushings, tie rods, and alignment hardware by exact manufacturer part number and vehicle application.Choose Your Part Match the complete SPL manufacturer part number Confirm year, make, model, mounting position, and suspension configuration Verify the adjustment function, range, threads, bearing interface, and included hardware Plan for professional installation, clearance checks, torque verification, and final alignment Precision Suspension SelectionSPL Parts components are designed around specific suspension geometry and mounting points. Confirm every engine, drivetrain, chassis and factory-equipment requirement in the product application notes. Always use the current manufacturer application and installation information for the exact part number.Related SPL Parts Products All SPL Parts products BMW caster rod bushings Toyota GR Supra and BMW Z4 caster bushings Nissan 350Z compr...

Suspension parts and complete kits for cars, trucks, SUVs, Jeeps, and off-road builds are stocked at Black Ops Auto Works. Shop coilovers, lowering springs, lift kits, leveling kits, shocks and struts, sway bars, control arms, tie rods, ball joints, bushings, chassis bracing, alignment hardware, air suspension, and complete stage kits from Bilstein, KW, Ohlins, Fox, KING, ICON, BC Racing, Silvers, Eibach, H&R, Swift Springs, Whiteline, Energy Suspension, Moog, SPC Performance, Rough Country, ReadyLIFT, BDS, Skyjacker, Air Lift, Firestone, and Black Ops Auto Works. Start with a matched shock and spring package or a full coilover kit, then layer in sway bars, chassis bracing, and camber adjustment hardware. Every part is filterable by year, make, model, trim, and drivetrain to confirm fitment before ordering. What This Category Covers Suspension is the highest-leverage handling upgrade on any vehicle. A properly matched shock, spring, and sway bar package produces measurable i...