View vehicle applications
Fitment notes and restrictions
Description
Build the fuel system around the correct flow and connection
Fuel Injector Connection 611661 supports the stated flow, fuel, electrical, and physical configuration. Sold individually. Price is per injector.
Features
- Sold individually. Price is per injector.
- Brand-new injector design
- FEA-validated design
- Designed for naturally aspirated, supercharged, and turbocharged engines
- OE-quality idle and drivability after proper calibration
- Technical Specifications
- Nozzle holes: 6 (OE)
- Nozzle technology: precision laser drilled
- Operating pressure: 220 bar
- Maximum fuel pressure: 280 bar
- Installation and Calibration
Fitment & Requirements
| Scope | Requirement |
|---|---|
| Component-specific application | Deliver additional fuel for high-horsepower LT applications while preserving the factory spray pattern and targeting. Each injector is manufactured from the ground up with precision laser-drilled nozzle technology. |
| Component-specific application | Maintains OEM spray targeting |
| Component-specific application | Compatible with gasoline and E85 |
| Component-specific application | Spray pattern: same as OE |
| Component-specific application | Direct drop-in replacement for the OEM fuel rail and cylinder head in applicable applications. Calibration is required and is available through partners. Intended for GM Gen V+ (2014-up) engines requiring increased direct injection fuel capacity; confirm compatibility for your application before ordering. |
Part Numbers & Options
| Option | Manufacturer Part Number |
|---|---|
| Default | 611661 |
Specifications
| Detail | Value |
|---|---|
| Product Type | Fuel Injector |
| Application Requirement | Deliver additional fuel for high-horsepower LT applications while preserving the factory spray pattern and targeting. Each injector is manufactured from the ground up with precision laser-drilled nozzle technology. |
| Flow Rating | Flow Capacity |
| Flow Rating 2 | 61% greater flow than OEM LT4 injectors |
| Flow Rating 3 | 88% greater flow than 2020–2023 LT2 injectors |
| Flow Rating 4 | 116% greater flow than 2023+ LT2 small-stem injectors |
| Application Requirement 2 | Maintains OEM spray targeting |
| Fuel Compatibility | Compatible with gasoline and E85 |
| Dimensions | Injector tip diameter: 7.45 mm (OE) |
| Application Requirement 3 | Spray pattern: same as OE |
| Application Requirement 4 | Direct drop-in replacement for the OEM fuel rail and cylinder head in applicable applications. Calibration is required and is available through partners. Intended for GM Gen V+ (2014-up) engines requiring increased direct injection fuel capacity; confirm compatibility for your application before ordering. |
What's Included
- The exact selected product or set shown in the Part Numbers & Options table
- Unlisted injectors, rails, wiring, fittings, tuning, tools, and installation hardware are not included
About Fuel Injector Connection
Fuel Injector Connection supplies flow-matched fuel injectors, connection components, service parts, and supporting fuel-system hardware. Correct selection depends on the exact flow, electrical, dimensional, spray-pattern, quantity, and engine requirements rather than a similar-looking injector alone.
Related Parts
- No external product is linked. Verify any injector adapters, rails, seals, pumps, or tuning components against an ACTIVE Black Ops Auto Works listing for the exact application before purchase.
FAQ
What is the 611661?It is the exact fuel injector and configuration described in the fitment and specification sections above.
Is this selected by vehicle model alone?No. Confirm every stated engine, connector, rail, length, flow, and package requirement that applies to this exact item.
Is tuning required?Fuel-system and injector changes can require calibration. Use qualified tuning guidance for the exact engine, fuel, injector data, and operating pressure.
Does the listing include every surrounding fuel-system part?No. Only the components stated in the What's Included section are included.
Can a related part number be substituted?No. A different flow rate, length, connector, spray pattern, quantity, or adapter package is a different configuration.
Which fuel can be used?Use only the fuels explicitly listed in the specifications and current manufacturer data for this exact configuration.
What should be checked before installation?Verify the part label, seals, connector, rail fit, quantity, fuel compatibility, and calibration requirements before opening the fuel system.
Who should install fuel-system components?A qualified technician should depressurize the system, follow the vehicle service procedure, prevent contamination, and leak-check the completed installation.
Installation Instructions
- Confirm the Fuel Injector Connection part label and every fitment, connector, dimension, flow, quantity, and fuel requirement before installation.
- Review the vehicle, engine, or component service procedure and disconnect electrical power where required.
- Relieve fuel-system pressure safely and work in a ventilated area away from sparks, flame, and hot surfaces.
- Keep all ports and components clean, replace only the seals specified for the exact application, and do not force mismatched connectors or fittings.
- Install the component in the documented orientation and tighten fasteners or fittings to the applicable current specification.
- Restore pressure, inspect every disturbed connection for leaks, confirm normal operation, and complete any required calibration before road use.




