Fuel Injector Connection LT4-SP fuel pump
Click to zoom in
View vehicle applications

Description

Supply the verified direct-injection or port-injection system

Fuel Injector Connection LT4-SP supports the stated high-pressure or port-injection fuel system. Stock LT4 Fuel Pump ACDelco 1268807/12711668

Features

  • Stock LT4 Fuel Pump ACDelco 1268807/12711668
  • Brand New Stock LT4 Replacements
  • 12650284, 12672374, 12684130, 12683517
  • there is no functional difference between "low", "nominal", and "high" versions; you just need all eight to match.

Fitment & Requirements

Scope Requirement
Component-specific application 2015 CHEVROLET CORVETTE
Component-specific application 2016 CADILLAC CTS
Component-specific application 2016 CHEVROLET CORVETTE
Component-specific application 2017 CADILLAC CTS
Component-specific application 2017 CHEVROLET CAMARO
Component-specific application 2017 CHEVROLET CORVETTE
Component-specific application 2018 CADILLAC CTS
Component-specific application 2018 CHEVROLET CAMARO
Component-specific application 2018 CHEVROLET CORVETTE
Component-specific application 2019 CHEVROLET CORVETTE
Component-specific application 2014-2017 C7 Corvette LT1
Component-specific application 2015-2017 C7 Z06 Corvette LT4
Component-specific application 2016-2017 Camaro SS LT1
Component-specific application 2016-2017 CTS-V LT4
Component-specific application 2014-2017 Silverado and Sierra with 4.3L LV3, 5.3L L83 and 6.2L L86 engines
Component-specific application 2015-2017 Suburban, Tahoe, Yukon and Escalade with 5.3L L83 and 6.2L L86 engines

Part Numbers & Options

Option Manufacturer Part Number
Default LT4-SP

Specifications

Detail Value
Product Type Fuel Pump
Manufacturer Reference HPM1036
Fuel Compatibility High horsepower GM Gen V V8 and V6 direct injection engines including LT4, LT1, L86, L83 and LV3 E85 conversions of GM Gen V V8 and V6 engines

What's Included

  • The exact selected product or set shown in the Part Numbers & Options table
  • Unlisted injectors, rails, wiring, fittings, tuning, tools, and installation hardware are not included

About Fuel Injector Connection

Fuel Injector Connection supplies flow-matched fuel injectors, connection components, service parts, and supporting fuel-system hardware. Correct selection depends on the exact flow, electrical, dimensional, spray-pattern, quantity, and engine requirements rather than a similar-looking injector alone.

Related Parts

  • No external product is linked. Verify any injector adapters, rails, seals, pumps, or tuning components against an ACTIVE Black Ops Auto Works listing for the exact application before purchase.

FAQ

What is the LT4-SP?

It is the exact fuel pump and configuration described in the fitment and specification sections above.

Is this selected by vehicle model alone?

No. Confirm every stated engine, connector, rail, length, flow, and package requirement that applies to this exact item.

Is tuning required?

Fuel-system and injector changes can require calibration. Use qualified tuning guidance for the exact engine, fuel, injector data, and operating pressure.

Does the listing include every surrounding fuel-system part?

No. Only the components stated in the What's Included section are included.

Can a related part number be substituted?

No. A different flow rate, length, connector, spray pattern, quantity, or adapter package is a different configuration.

Which fuel can be used?

Use only the fuels explicitly listed in the specifications and current manufacturer data for this exact configuration.

What should be checked before installation?

Verify the part label, seals, connector, rail fit, quantity, fuel compatibility, and calibration requirements before opening the fuel system.

Who should install fuel-system components?

A qualified technician should depressurize the system, follow the vehicle service procedure, prevent contamination, and leak-check the completed installation.

Installation Instructions

  1. Confirm the Fuel Injector Connection part label and every fitment, connector, dimension, flow, quantity, and fuel requirement before installation.
  2. Review the vehicle, engine, or component service procedure and disconnect electrical power where required.
  3. Relieve fuel-system pressure safely and work in a ventilated area away from sparks, flame, and hot surfaces.
  4. Keep all ports and components clean, replace only the seals specified for the exact application, and do not force mismatched connectors or fittings.
  5. Install the component in the documented orientation and tighten fasteners or fittings to the applicable current specification.
  6. Restore pressure, inspect every disturbed connection for leaks, confirm normal operation, and complete any required calibration before road use.

Fuel Injector Connection Stock LT4 Package- High Pressure Pump + Fuel Injectors

LT4-SP
Fuel Pumps
Same Day or Next Business Day
$ 1,762.00
$ 1,762.00

Military & First Responders

Military & First Responders

A program for military members and first responders, with dedicated verification and support for your next build.

Learn More & Apply

Your cart

×