Click to zoom in
Renew the suspension pivots that control steering and rear-axle movement
SuperPro KIT306K replaces key front and rear rubber suspension bushings on the Ram 1500 DS platform with application-specific polyurethane components. It is intended for the listed four-wheel-drive trucks and requires a front and rear alignment after installation.
Key Features
- Front and rear vehicle bushing package for Ram 1500 DS-platform 4WD trucks
- SuperPro KIT306K covers control-arm, shock-mount, panhard-rod and trailing-arm locations
- Twenty polyurethane bushings replace the specified original rubber pivots
- Eighteen crush tubes and eight washers support the included bushing locations
- Polyurethane construction is designed to reduce unwanted suspension movement
- SuperPro recommends installation by a suspension specialist
Fitment
| Years | Make | Model | Requirements |
|---|---|---|---|
| 2009-2010 | Dodge | Ram 1500 | DS platform, 4WD |
| 2011-2018 | Ram | 1500 | DS platform, 4WD |
| 2019-2024 | Ram | 1500 Classic | DS platform, 4WD; excludes DT-generation Ram 1500 |
Use KIT306K only on the DS-platform four-wheel-drive applications shown. Do not select this kit for a 2019-or-newer DT-generation Ram 1500.
Specifications
| Detail | Value |
|---|---|
| Manufacturer Part Number | KIT306K |
| Brand | SuperPro |
| Product Type | Front and rear suspension bushing kit |
| Material | Polyurethane bushings with metal crush tubes and washers |
| Fitting Position | Front and rear |
| Installation Time | Approximately 4 hours according to SuperPro |
| Installation Level | Suspension specialist recommended |
| Alignment | Front and rear wheel alignment required |
| Warranty | SuperPro limited lifetime warranty, subject to current terms |
What's Included
- Twenty polyurethane bushings
- Eighteen crush tubes
- Eight washers
- SuperPro KIT306K components for the specified front lower and upper control arms, front shock-to-control-arm mounts, rear panhard rod, and rear upper and lower trailing arms
- Control arms, shocks, springs, tools and alignment service are not included
About SuperPro
SuperPro develops polyurethane suspension bushings and chassis components around the movement, load and alignment requirements of each application. This vehicle kit groups the specified DS-platform front and rear bushing locations into one service package.
Related Parts
- Inspect the control arms, ball joints, shock mounts, panhard rod, trailing arms and fasteners before installation, replacing only parts verified for the same DS-platform 4WD application.
FAQ
What is the KIT306K?It is a SuperPro front and rear polyurethane suspension bushing package for the listed Ram 1500 DS-platform 4WD applications.
Does this kit fit the newer DT-generation Ram 1500?No. The verified application is the DS platform, including the applicable Ram 1500 Classic, and excludes the DT platform.
Is this kit for two-wheel-drive trucks?No. The manufacturer application reviewed for this package is the DS-platform four-wheel-drive truck.
How many bushings are included?The package contains twenty polyurethane bushings, eighteen crush tubes and eight washers.
Which suspension areas are serviced?The package covers specified front control-arm and shock-mount locations plus the rear panhard rod and upper and lower trailing-arm locations.
Are complete control arms included?No. This is a bushing, tube and washer package; complete control arms and shocks are not included.
Is professional installation recommended?Yes. SuperPro identifies this as a suspension-specialist installation with an estimated four-hour fitting time.
Is an alignment required?Yes. SuperPro calls for a front and rear wheel alignment after the bushings are installed.
Installation Instructions
- Confirm the truck is a listed DS-platform 4WD application and that the package identifies SuperPro KIT306K.
- Raise and support the vehicle using the factory service procedure, then document the original suspension positions.
- Remove the affected arms or links and press out the original bushings with suitable suspension-service tools.
- Clean and inspect each housing, then install the matching polyurethane bushing and crush tube in its specified location.
- Reassemble with serviceable fasteners and tighten pivot hardware at the manufacturer-specified ride-height condition.
- Complete a front and rear wheel alignment and verify quiet, unrestricted suspension movement before road use.
California Proposition 65 Warning: Cancer and reproductive harm. See www.P65Warnings.ca.gov.
SuperPro
Shop SuperPro chassis parts for bushing repairs, control-arm service and sway-bar projects at Black Ops Auto Works. Compare individual mount bushings, arm assemblies, links and application-specific suspension kits. Choose the component around your actual chassis, repair position and alignment goals.Bushings by Component and PositionControl-arm, differential, subframe and spring bushings serve different mounting points. Match front or rear, inner or outer and forward or rearward positions to the assembly being repaired. Sway-bar mount choices also require the actual bar diameter and correct mounting profile.Control Arms and Geometry ChoicesCompare complete arms with individual bushing kits, then review supplied ball joints or mounts. Fixed-offset and adjustable references have different geometry and installation requirements. Caster, camber and anti-lift project choices need exact chassis coverage and a plan for alignment after installation.Sway Bars, Links and Supporting ComponentsC...
View SuperPro Products