SuperPro 2003 Mitsubishi Lancer Evolution Front Roll Center & Bump Steer Correction Kit, manufacturer part number TRC0005, is a new SuperPro ball joints product selected by the verified year, make, and model records below. Confirm the mounting position, dimensions, bar diameter where applicable, included components, and every current manufacturer application note before ordering.
Fitment
| Years | Make | Model | Application Notes |
|---|---|---|---|
| 2003-2006 | Mitsubishi | Lancer | Confirm position, dimensions, drivetrain, suspension, and exclusions |
| 2008 | Mitsubishi | Lancer | Confirm position, dimensions, drivetrain, suspension, and exclusions |
| 2010-2015 | Mitsubishi | Lancer | Confirm position, dimensions, drivetrain, suspension, and exclusions |
Specifications
| Brand | SuperPro |
|---|---|
| Manufacturer Part Number | TRC0005 |
| Product Type | Ball Joints |
| Position | Front |
| Fitment Type | Vehicle Specific |
| Condition | New |
What's Included
One new SuperPro ball joints package identified by manufacturer part number TRC0005, including only the bushings, sleeves, brackets, lubricant, fasteners, and other hardware expressly supplied in the sealed manufacturer package.
About SuperPro
SuperPro engineers polyurethane suspension bushings, control arms, sway bars, end links, alignment components, and related chassis products for street, performance, and off-road applications.
Related SuperPro Products
- Shop all SuperPro products
- SuperPro 1998 Subaru Forester L Front Roll Center & Bump Steer Correction Kit
- SuperPro 2006 Audi A3 Base Front Lower Camber Adjustable Ball Joint Set
- Superpro 2008 Pontiac G8 GT Rear Upper Control Arm Hyme Join Set
Frequently Asked Questions
How do I confirm SuperPro TRC0005 fits my vehicle?
Match the exact year, make, and model where listed, then verify the mounting position, component dimensions, suspension configuration, drivetrain, and every manufacturer qualifier.
Are similar SuperPro bushings interchangeable with TRC0005?
No. Outside diameter, inside diameter, installed width, sleeve size, bracket geometry, bar diameter, and position can differ even when parts look alike.
What should be checked after installing SuperPro TRC0005?
Confirm fastener torque, component seating, full suspension travel, steering and driveline clearance, and any required wheel alignment. Reinspect the installation after the initial settling period.
Installation
Follow the current SuperPro instructions and the vehicle service procedure for this exact part number. Support the vehicle safely, compare all supplied parts before disassembly, lubricate only the specified surfaces, torque hardware in the required suspension position, verify full travel and clearance, and complete any required alignment and post-installation inspection.
Ball Joints
Ball joints restore controlled suspension movement and steering geometry on trucks, SUVs, muscle cars, Jeeps, and daily drivers. Shop OE-replacement and heavy-duty upper and lower ball joints for Silverado, F-150, Ram, Wrangler, Tacoma, 4Runner, Camaro, Mustang, Civic, Jeep, GM HD, and Ford Super Duty applications. Black Ops Auto Works carries 99 ball-joint SKUs across pressed-in replacements, bolt-in service kits, heavy-duty off-road upgrades, control-arm replacement joints, boots, and specialty steering components. Filter by year, make, model, trim, engine, and drivetrain before ordering. What Ball Joints Do Ball joints connect the control arm to the steering knuckle while allowing the suspension to move and the wheel to steer. Worn joints can cause steering looseness, uneven tire wear, clunks, and poor alignment stability. Upper and Lower Locations Many vehicles use upper and lower ball joints, but the configuration varies by suspension design. Verify the exact axle position ...
View Ball Joints Products
SuperPro
Shop SuperPro polyurethane suspension bushings, control arms, sway bars, end links, alignment components, spring isolators, differential mounts, and chassis service parts by exact manufacturer part number and verified vehicle application.SuperPro Product Families Polyurethane suspension and sway-bar bushings Control arms, ball joints, end links, and alignment components Sway bars, spring isolators, shock mounts, and chassis supports Differential, transmission, steering, and universal service components Choosing the Correct SuperPro PartConfirm the exact part number, year, make, model, mounting position, bar diameter, bushing dimensions, suspension configuration, and every manufacturer application note. Trim, engine, drivetrain, and chassis details remain application notes rather than model tags.About SuperProSuperPro engineers polyurethane suspension and chassis components for street, performance, and off-road vehicles, with application-specific designs and exact dimensional require...
View SuperPro Products
Suspension
Suspension parts and complete kits for cars, trucks, SUVs, Jeeps, and off-road builds are stocked at Black Ops Auto Works. Shop coilovers, lowering springs, lift kits, leveling kits, shocks and struts, sway bars, control arms, tie rods, ball joints, bushings, chassis bracing, alignment hardware, air suspension, and complete stage kits from Bilstein, KW, Ohlins, Fox, KING, ICON, BC Racing, Silvers, Eibach, H&R, Swift Springs, Whiteline, Energy Suspension, Moog, SPC Performance, Rough Country, ReadyLIFT, BDS, Skyjacker, Air Lift, Firestone, and Black Ops Auto Works. Start with a matched shock and spring package or a full coilover kit, then layer in sway bars, chassis bracing, and camber adjustment hardware. Every part is filterable by year, make, model, trim, and drivetrain to confirm fitment before ordering. What This Category Covers Suspension is the highest-leverage handling upgrade on any vehicle. A properly matched shock, spring, and sway bar package produces measurable i...
View Suspension Products


