-15%
Swift copper 080-250-325 F flat-track motorcycle shock spring, representative rate photo
Click to zoom in
View vehicle applications

Description

Match the Spring to Your Race Suspension

The Swift flat-track motorcycle shock spring supports a correctly selected suspension setup. This 080-250-350 F configuration is specified for 8-inch free length, 2.5-inch inner diameter, 350 lb/in rate. Choose the complete configuration to match your spring, damper and intended use.

Key Features

  • Nominal free length: 8 inches; inner diameter: 2.5 inches.
  • Published spring rate: 350 lb/in.
  • Usable stroke: 3.5 inches; maximum stroke: 5.7 inches.
  • Maximum spring load: 1,982 lb.
  • Produced with Swift proprietary HS5.TW spring material.
  • Developed specifically for flat-track motorcycle shock arrangements.
  • Swift’s design aims to reduce harmonic vibration and improve compliance with course conditions.
  • One individual Swift spring in the selected part-number configuration.

Application details and restrictions

Universal dimensional/component selection: 8-inch free length, 2.5-inch inner diameter, 350 lb/in rate. Dimension-selected motorcycle competition component. No motorcycle year/make/model or road-vehicle fitment is assigned. This is not a passenger-car lowering spring. Match the exact spring, seat, damper and supporting hardware before ordering. A Universal Fit designation does not mean compatibility with every vehicle, spring or shock from a named brand. Verify installed height, engagement, full-droop retention and clearance through the complete working travel range.

Specifications

Brand Swift Springs
Manufacturer Part Number 080-250-350 F
Product Family Flat-Track Motorcycle Shock Spring
Package One individual Swift spring in the selected part-number configuration
Free Length 8 in
Inner Diameter 2.5 in
Spring Rate 350 lb/in
Usable Stroke 3.5 in
Maximum Stroke 5.7 in
Maximum Spring Load 1,982 lb
Material Swift proprietary HS5.TW spring material
Condition New

What's Included

One individual Swift spring in the selected part-number configuration. Springs, dampers, mounts, retainers, adapters and other supporting components are included only when explicitly listed in the kit contents above.

Representative product-family hero photo. Actual dimensions, bore, geometry and markings depend on the selected part number; use the specification table and complete part number to select the correct configuration. Swift uses a 325 lb/in spring as the source image example for this family; choose the actual rate by the part number.

About Swift Springs

Swift develops springs and supporting components for motorsports and vehicle-specific suspension tuning. Its range includes main springs, helper springs, bump-spring systems, guides, adapters and protective accessories. Each family has distinct selection requirements. Use the complete part number, published dimensions, package contents and intended application to build a compatible arrangement. Results depend on the full chassis and damper setup.

Related Parts

    8in | 2.5in ID Flat Track Motorcycle Springs

    FAQ

    What is the 080-250-350 F?

    A Swift flat-track motorcycle shock spring specified for 8-inch free length, 2.5-inch inner diameter, 350 lb/in rate.

    What is included?

    One individual Swift spring in the selected part-number configuration. Springs, dampers, mounts, retainers, adapters and other supporting components are included only when explicitly listed in the kit contents above.

    Does Universal Fit establish vehicle fitment?

    Universal dimensional/component selection: 8-inch free length, 2.5-inch inner diameter, 350 lb/in rate. Dimension-selected motorcycle competition component. No motorcycle year/make/model or road-vehicle fitment is assigned. This is not a passenger-car lowering spring. Match the exact spring, seat, damper and supporting hardware before ordering. A Universal Fit designation does not mean compatibility with every vehicle, spring or shock from a named brand. Verify installed height, engagement, full-droop retention and clearance through the complete working travel range.

    Which dimensions and interfaces should I check?

    Match the complete part number and published application dimensions to the actual spring, seat and damper arrangement. Confirm component generation, retention and the working range rather than assuming a shared brand name or nominal inch label establishes compatibility.

    Which family-specific design notes apply?

    Nominal free length: 8 inches; inner diameter: 2.5 inches. Published spring rate: 350 lb/in. Usable stroke: 3.5 inches; maximum stroke: 5.7 inches. Maximum spring load: 1,982 lb. Produced with Swift proprietary HS5.TW spring material. Developed specifically for flat-track motorcycle shock arrangements. Swift’s design aims to reduce harmonic vibration and improve compliance with course conditions.

    Can this be installed without checking the rest of the suspension?

    The complete suspension arrangement determines compatibility and behavior. Inspect supporting parts, installed height, seating, engagement and travel. This part does not establish an alignment setting, fixed lowering amount or complete suspension conversion.

    Does the hero photo show this exact specification?

    Representative product-family hero photo. Actual dimensions, bore, geometry and markings depend on the selected part number; use the specification table and complete part number to select the correct configuration. Swift uses a 325 lb/in spring as the source image example for this family; choose the actual rate by the part number.

    What should be checked before use?

    Use a qualified race suspension technician. Unload spring tension safely, match the spring-seat interface, free length and rate, and inspect the damper and supporting hardware. Verify seating, full-droop retention and clearances through the working compression and rebound range. Do not use maximum spring load as a vehicle payload or axle rating.

    Installation Instructions

    Use a qualified race suspension technician. Unload spring tension safely, match the spring-seat interface, free length and rate, and inspect the damper and supporting hardware. Verify seating, full-droop retention and clearances through the working compression and rebound range. Do not use maximum spring load as a vehicle payload or axle rating.

    Swift 080-250-350 F Flat-Track Motorcycle Shock Spring - 8-inch free length, 2.5-inch inner diameter, 350 lb/in rate

    Swift Springs
    080-250-350 F
    Motorcycle Shock Springs
    Special order
    $ 115.00 $ 96.75
    $ 96.75

    Military & First Responders

    Military & First Responders

    A program for military members and first responders, with dedicated verification and support for your next build.

    Learn More & Apply

    Your cart

    ×